From: Yu Kuai <yukuai1@huaweicloud.com> To: hch@lst.de, axboe@kernel.dk Cc: cgroups@vger.kernel.org, linux-block@vger.kernel.org, linux-kernel@vger.kernel.org, yukuai3@huawei.com, yukuai1@huaweicloud.com, yi.zhang@huawei.com, yangerkun@huawei.com Subject: [PATCH -next v3 5/5] blk-sysfs: add a new attr_group for blk_mq Date: Sat, 27 May 2023 09:06:44 +0800 [thread overview] Message-ID: <20230527010644.647900-6-yukuai1@huaweicloud.com> (raw) In-Reply-To: <20230527010644.647900-1-yukuai1@huaweicloud.com> From: Yu Kuai <yukuai3@huawei.com> Currently wbt sysfs entry is created for bio based device, and wbt can be enabled for such device through sysfs while it doesn't make sense because wbt can only work for rq based device. In the meantime, there are other similar sysfs entries. Fix this by adding a new attr_group for blk_mq, and sysfs entries will only be created when the device is rq based. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> --- block/blk-sysfs.c | 42 +++++++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 11 deletions(-) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 6c1c4ba66bc0..afc797fb0dfc 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -621,7 +621,6 @@ QUEUE_RW_ENTRY(queue_wb_lat, "wbt_lat_usec"); #endif static struct attribute *queue_attrs[] = { - &queue_requests_entry.attr, &queue_ra_entry.attr, &queue_max_hw_sectors_entry.attr, &queue_max_sectors_entry.attr, @@ -629,7 +628,6 @@ static struct attribute *queue_attrs[] = { &queue_max_discard_segments_entry.attr, &queue_max_integrity_segments_entry.attr, &queue_max_segment_size_entry.attr, - &elv_iosched_entry.attr, &queue_hw_sector_size_entry.attr, &queue_logical_block_size_entry.attr, &queue_physical_block_size_entry.attr, @@ -650,7 +648,6 @@ static struct attribute *queue_attrs[] = { &queue_max_open_zones_entry.attr, &queue_max_active_zones_entry.attr, &queue_nomerges_entry.attr, - &queue_rq_affinity_entry.attr, &queue_iostats_entry.attr, &queue_stable_writes_entry.attr, &queue_random_entry.attr, @@ -658,11 +655,7 @@ static struct attribute *queue_attrs[] = { &queue_wc_entry.attr, &queue_fua_entry.attr, &queue_dax_entry.attr, -#ifdef CONFIG_BLK_WBT - &queue_wb_lat_entry.attr, -#endif &queue_poll_delay_entry.attr, - &queue_io_timeout_entry.attr, #ifdef CONFIG_BLK_DEV_THROTTLING_LOW &blk_throtl_sample_time_entry.attr, #endif @@ -671,16 +664,23 @@ static struct attribute *queue_attrs[] = { NULL, }; +static struct attribute *blk_mq_queue_attrs[] = { + &queue_requests_entry.attr, + &elv_iosched_entry.attr, + &queue_rq_affinity_entry.attr, + &queue_io_timeout_entry.attr, +#ifdef CONFIG_BLK_WBT + &queue_wb_lat_entry.attr, +#endif + NULL, +}; + static umode_t queue_attr_visible(struct kobject *kobj, struct attribute *attr, int n) { struct gendisk *disk = container_of(kobj, struct gendisk, queue_kobj); struct request_queue *q = disk->queue; - if (attr == &queue_io_timeout_entry.attr && - (!q->mq_ops || !q->mq_ops->timeout)) - return 0; - if ((attr == &queue_max_open_zones_entry.attr || attr == &queue_max_active_zones_entry.attr) && !blk_queue_is_zoned(q)) @@ -689,11 +689,30 @@ static umode_t queue_attr_visible(struct kobject *kobj, struct attribute *attr, return attr->mode; } +static umode_t blk_mq_queue_attr_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct gendisk *disk = container_of(kobj, struct gendisk, queue_kobj); + struct request_queue *q = disk->queue; + + if (!queue_is_mq(q)) + return 0; + + if (attr == &queue_io_timeout_entry.attr && !q->mq_ops->timeout) + return 0; + + return attr->mode; +} + static struct attribute_group queue_attr_group = { .attrs = queue_attrs, .is_visible = queue_attr_visible, }; +static struct attribute_group blk_mq_queue_attr_group = { + .attrs = blk_mq_queue_attrs, + .is_visible = blk_mq_queue_attr_visible, +}; #define to_queue(atr) container_of((atr), struct queue_sysfs_entry, attr) @@ -738,6 +757,7 @@ static const struct sysfs_ops queue_sysfs_ops = { static const struct attribute_group *blk_queue_attr_groups[] = { &queue_attr_group, + &blk_mq_queue_attr_group, NULL }; -- 2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Yu Kuai <yukuai1-XF6JlduFytWkHkcT6e4Xnw@public.gmane.org> To: hch-jcswGhMUV9g@public.gmane.org, axboe-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org Cc: cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-block-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, yukuai1-XF6JlduFytWkHkcT6e4Xnw@public.gmane.org, yi.zhang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, yangerkun-hv44wF8Li93QT0dZR+AlfA@public.gmane.org Subject: [PATCH -next v3 5/5] blk-sysfs: add a new attr_group for blk_mq Date: Sat, 27 May 2023 09:06:44 +0800 [thread overview] Message-ID: <20230527010644.647900-6-yukuai1@huaweicloud.com> (raw) In-Reply-To: <20230527010644.647900-1-yukuai1-XF6JlduFytWkHkcT6e4Xnw@public.gmane.org> From: Yu Kuai <yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> Currently wbt sysfs entry is created for bio based device, and wbt can be enabled for such device through sysfs while it doesn't make sense because wbt can only work for rq based device. In the meantime, there are other similar sysfs entries. Fix this by adding a new attr_group for blk_mq, and sysfs entries will only be created when the device is rq based. Suggested-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org> Signed-off-by: Yu Kuai <yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> Reviewed-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org> --- block/blk-sysfs.c | 42 +++++++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 11 deletions(-) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 6c1c4ba66bc0..afc797fb0dfc 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -621,7 +621,6 @@ QUEUE_RW_ENTRY(queue_wb_lat, "wbt_lat_usec"); #endif static struct attribute *queue_attrs[] = { - &queue_requests_entry.attr, &queue_ra_entry.attr, &queue_max_hw_sectors_entry.attr, &queue_max_sectors_entry.attr, @@ -629,7 +628,6 @@ static struct attribute *queue_attrs[] = { &queue_max_discard_segments_entry.attr, &queue_max_integrity_segments_entry.attr, &queue_max_segment_size_entry.attr, - &elv_iosched_entry.attr, &queue_hw_sector_size_entry.attr, &queue_logical_block_size_entry.attr, &queue_physical_block_size_entry.attr, @@ -650,7 +648,6 @@ static struct attribute *queue_attrs[] = { &queue_max_open_zones_entry.attr, &queue_max_active_zones_entry.attr, &queue_nomerges_entry.attr, - &queue_rq_affinity_entry.attr, &queue_iostats_entry.attr, &queue_stable_writes_entry.attr, &queue_random_entry.attr, @@ -658,11 +655,7 @@ static struct attribute *queue_attrs[] = { &queue_wc_entry.attr, &queue_fua_entry.attr, &queue_dax_entry.attr, -#ifdef CONFIG_BLK_WBT - &queue_wb_lat_entry.attr, -#endif &queue_poll_delay_entry.attr, - &queue_io_timeout_entry.attr, #ifdef CONFIG_BLK_DEV_THROTTLING_LOW &blk_throtl_sample_time_entry.attr, #endif @@ -671,16 +664,23 @@ static struct attribute *queue_attrs[] = { NULL, }; +static struct attribute *blk_mq_queue_attrs[] = { + &queue_requests_entry.attr, + &elv_iosched_entry.attr, + &queue_rq_affinity_entry.attr, + &queue_io_timeout_entry.attr, +#ifdef CONFIG_BLK_WBT + &queue_wb_lat_entry.attr, +#endif + NULL, +}; + static umode_t queue_attr_visible(struct kobject *kobj, struct attribute *attr, int n) { struct gendisk *disk = container_of(kobj, struct gendisk, queue_kobj); struct request_queue *q = disk->queue; - if (attr == &queue_io_timeout_entry.attr && - (!q->mq_ops || !q->mq_ops->timeout)) - return 0; - if ((attr == &queue_max_open_zones_entry.attr || attr == &queue_max_active_zones_entry.attr) && !blk_queue_is_zoned(q)) @@ -689,11 +689,30 @@ static umode_t queue_attr_visible(struct kobject *kobj, struct attribute *attr, return attr->mode; } +static umode_t blk_mq_queue_attr_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct gendisk *disk = container_of(kobj, struct gendisk, queue_kobj); + struct request_queue *q = disk->queue; + + if (!queue_is_mq(q)) + return 0; + + if (attr == &queue_io_timeout_entry.attr && !q->mq_ops->timeout) + return 0; + + return attr->mode; +} + static struct attribute_group queue_attr_group = { .attrs = queue_attrs, .is_visible = queue_attr_visible, }; +static struct attribute_group blk_mq_queue_attr_group = { + .attrs = blk_mq_queue_attrs, + .is_visible = blk_mq_queue_attr_visible, +}; #define to_queue(atr) container_of((atr), struct queue_sysfs_entry, attr) @@ -738,6 +757,7 @@ static const struct sysfs_ops queue_sysfs_ops = { static const struct attribute_group *blk_queue_attr_groups[] = { &queue_attr_group, + &blk_mq_queue_attr_group, NULL }; -- 2.39.2
next prev parent reply other threads:[~2023-05-27 1:10 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-05-27 1:06 [PATCH -next v3 0/5] blk-wbt: minor fix and cleanup Yu Kuai 2023-05-27 1:06 ` Yu Kuai 2023-05-27 1:06 ` [PATCH -next v3 1/5] blk-wbt: don't create wbt sysfs entry if CONFIG_BLK_WBT is disabled Yu Kuai 2023-05-27 1:06 ` [PATCH -next v3 2/5] blk-wbt: remove dead code to handle wbt enable/disable with io inflight Yu Kuai 2023-05-27 1:06 ` Yu Kuai 2023-05-27 1:06 ` [PATCH -next v3 3/5] blk-wbt: cleanup rwb_enabled() and wbt_disabled() Yu Kuai 2023-05-27 1:06 ` [PATCH -next v3 4/5] blk-iocost: move wbt_enable/disable_default() out of spinlock Yu Kuai 2023-05-27 1:06 ` Yu Kuai [this message] 2023-05-27 1:06 ` [PATCH -next v3 5/5] blk-sysfs: add a new attr_group for blk_mq Yu Kuai 2023-06-08 2:36 ` [PATCH -next v3 0/5] blk-wbt: minor fix and cleanup Yu Kuai 2023-06-08 2:36 ` Yu Kuai 2023-06-26 2:46 ` Yu Kuai 2023-06-26 15:53 ` Jens Axboe 2023-06-26 15:53 ` Jens Axboe
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230527010644.647900-6-yukuai1@huaweicloud.com \ --to=yukuai1@huaweicloud.com \ --cc=axboe@kernel.dk \ --cc=cgroups@vger.kernel.org \ --cc=hch@lst.de \ --cc=linux-block@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=yangerkun@huawei.com \ --cc=yi.zhang@huawei.com \ --cc=yukuai3@huawei.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.