All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ping-Ke Shih <pkshih@realtek.com>
To: <kvalo@kernel.org>, <tony0620emma@gmail.com>
Cc: <stable@vger.kernel.org>, <linux-wireless@vger.kernel.org>
Subject: [PATCH 2/3] wifi: rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
Date: Sat, 27 May 2023 16:29:38 +0800	[thread overview]
Message-ID: <20230527082939.11206-3-pkshih@realtek.com> (raw)
In-Reply-To: <20230527082939.11206-1-pkshih@realtek.com>

This driver relies on IEEE80211_CONF_PS of hw->conf.flags to turn off PS or
turn on dynamic PS controlled by driver and firmware. Though this would be
incorrect, it did work before because the flag is always recalculated until
the commit 28977e790b5d ("wifi: mac80211: skip powersave recalc if driver SUPPORTS_DYNAMIC_PS")
is introduced by kernel 5.20 to skip to recalculate IEEE80211_CONF_PS
of hw->conf.flags if driver sets SUPPORTS_DYNAMIC_PS.

Correct this by doing recalculation while BSS_CHANGED_PS is changed and
interface is added or removed. For now, it is allowed to enter PS only if
single one station vif is working, and it could possible to have PS per
vif after firmware can support it. Without this fix, driver doesn't
enter PS anymore that causes higher power consumption.

Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/mac80211.c | 15 +++++------
 drivers/net/wireless/realtek/rtw89/ps.c       | 26 +++++++++++++++++++
 drivers/net/wireless/realtek/rtw89/ps.h       |  1 +
 3 files changed, 33 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c
index f40d70f016e4c..0ffd7fb489a5e 100644
--- a/drivers/net/wireless/realtek/rtw89/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
@@ -89,15 +89,6 @@ static int rtw89_ops_config(struct ieee80211_hw *hw, u32 changed)
 	    !(hw->conf.flags & IEEE80211_CONF_IDLE))
 		rtw89_leave_ips(rtwdev);
 
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
-		if (hw->conf.flags & IEEE80211_CONF_PS) {
-			rtwdev->lps_enabled = true;
-		} else {
-			rtw89_leave_lps(rtwdev);
-			rtwdev->lps_enabled = false;
-		}
-	}
-
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 		rtw89_config_entity_chandef(rtwdev, RTW89_SUB_ENTITY_0,
 					    &hw->conf.chandef);
@@ -168,6 +159,8 @@ static int rtw89_ops_add_interface(struct ieee80211_hw *hw,
 	rtw89_core_txq_init(rtwdev, vif->txq);
 
 	rtw89_btc_ntfy_role_info(rtwdev, rtwvif, NULL, BTC_ROLE_START);
+
+	rtw89_recalc_lps(rtwdev);
 out:
 	mutex_unlock(&rtwdev->mutex);
 
@@ -192,6 +185,7 @@ static void rtw89_ops_remove_interface(struct ieee80211_hw *hw,
 	rtw89_mac_remove_vif(rtwdev, rtwvif);
 	rtw89_core_release_bit_map(rtwdev->hw_port, rtwvif->port);
 	list_del_init(&rtwvif->list);
+	rtw89_recalc_lps(rtwdev);
 	rtw89_enter_ips_by_hwflags(rtwdev);
 
 	mutex_unlock(&rtwdev->mutex);
@@ -451,6 +445,9 @@ static void rtw89_ops_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_CQM)
 		rtw89_fw_h2c_set_bcn_fltr_cfg(rtwdev, vif, true);
 
+	if (changed & BSS_CHANGED_PS)
+		rtw89_recalc_lps(rtwdev);
+
 	mutex_unlock(&rtwdev->mutex);
 }
 
diff --git a/drivers/net/wireless/realtek/rtw89/ps.c b/drivers/net/wireless/realtek/rtw89/ps.c
index fa94335f699aa..84201ef19c176 100644
--- a/drivers/net/wireless/realtek/rtw89/ps.c
+++ b/drivers/net/wireless/realtek/rtw89/ps.c
@@ -252,3 +252,29 @@ void rtw89_process_p2p_ps(struct rtw89_dev *rtwdev, struct ieee80211_vif *vif)
 	rtw89_p2p_disable_all_noa(rtwdev, vif);
 	rtw89_p2p_update_noa(rtwdev, vif);
 }
+
+void rtw89_recalc_lps(struct rtw89_dev *rtwdev)
+{
+	struct ieee80211_vif *vif, *found_vif = NULL;
+	struct rtw89_vif *rtwvif;
+	int count = 0;
+
+	rtw89_for_each_rtwvif(rtwdev, rtwvif) {
+		vif = rtwvif_to_vif(rtwvif);
+
+		if (vif->type != NL80211_IFTYPE_STATION) {
+			count = 0;
+			break;
+		}
+
+		count++;
+		found_vif = vif;
+	}
+
+	if (count == 1 && found_vif->cfg.ps) {
+		rtwdev->lps_enabled = true;
+	} else {
+		rtw89_leave_lps(rtwdev);
+		rtwdev->lps_enabled = false;
+	}
+}
diff --git a/drivers/net/wireless/realtek/rtw89/ps.h b/drivers/net/wireless/realtek/rtw89/ps.h
index 73c008db04264..4c18f49204b28 100644
--- a/drivers/net/wireless/realtek/rtw89/ps.h
+++ b/drivers/net/wireless/realtek/rtw89/ps.h
@@ -15,6 +15,7 @@ void rtw89_enter_ips(struct rtw89_dev *rtwdev);
 void rtw89_leave_ips(struct rtw89_dev *rtwdev);
 void rtw89_set_coex_ctrl_lps(struct rtw89_dev *rtwdev, bool btc_ctrl);
 void rtw89_process_p2p_ps(struct rtw89_dev *rtwdev, struct ieee80211_vif *vif);
+void rtw89_recalc_lps(struct rtw89_dev *rtwdev);
 
 static inline void rtw89_leave_ips_by_hwflags(struct rtw89_dev *rtwdev)
 {
-- 
2.25.1


  parent reply	other threads:[~2023-05-27  8:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-27  8:29 [PATCH 0/3] wifi: rtw88/89: add PS calculation to repair PS mode Ping-Ke Shih
2023-05-27  8:29 ` [PATCH 1/3] wifi: rtw88: correct PS calculation for SUPPORTS_DYNAMIC_PS Ping-Ke Shih
2023-06-01 13:17   ` Kalle Valo
2023-05-27  8:29 ` Ping-Ke Shih [this message]
2023-05-27  8:29 ` [PATCH 3/3] wifi: rtw89: remove redundant check of entering LPS Ping-Ke Shih
2023-05-27  8:30   ` kernel test robot
2023-05-27  8:37     ` Ping-Ke Shih
2023-05-28 17:43 ` [PATCH 0/3] wifi: rtw88/89: add PS calculation to repair PS mode Larry Finger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230527082939.11206-3-pkshih@realtek.com \
    --to=pkshih@realtek.com \
    --cc=kvalo@kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tony0620emma@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.