All of lore.kernel.org
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <arnd@arndb.de>, <olof@lixom.net>, <arm@kernel.org>, <soc@kernel.org>
Cc: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [GIT PULL] AT91 DT updates for 6.5
Date: Tue, 30 May 2023 13:59:45 +0300	[thread overview]
Message-ID: <20230530105945.11638-1-claudiu.beznea@microchip.com> (raw)

The following changes since commit ac9a78681b921877518763ba0e89202254349d1b:

  Linux 6.4-rc1 (2023-05-07 13:34:35 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/at91-dt-6.5

for you to fetch changes up to 4ceb0c70d0dae0f1327c4cfda3826b98a885f735:

  ARM: dts: at91: sama5d2: remove extra line (2023-05-24 12:15:29 +0300)

----------------------------------------------------------------
AT91 DT for 6.5

It contains:
- gpio-line-names addition for at91-tse850-3 board
- support for SMA connectors on lan966x-pcb8309 board
- use drive-open-drain as boolean property as this is how code handles
  it
- generic names for clock controller devices
- use of the new clock controller bindings for at91sam9n12 slow clock
  controller
- one blank line removal on sama5d2.dtsi

----------------------------------------------------------------
Claudiu Beznea (4):
      ARM: dts: at91: use clock-controller name for PMC nodes
      ARM: dts: at91: at91sam9n12: witch sckc to new clock bindings
      ARM: dts: at91: use clock-controller name for sckc nodes
      ARM: dts: at91: sama5d2: remove extra line

Horatiu Vultur (1):
      ARM: dts: lan966x: Add support for SMA connectors

Peter Rosin (1):
      ARM: dts: at91: tse850: add properties for gpio-line-names

Ryan Wanner (1):
      ARM: dts: at91: Return to boolean properties

 arch/arm/boot/dts/at91-kizbox3-hs.dts      |  2 +-
 arch/arm/boot/dts/at91-kizbox3_common.dtsi |  2 +-
 arch/arm/boot/dts/at91-tse850-3.dts        | 60 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/at91rm9200.dtsi          |  2 +-
 arch/arm/boot/dts/at91sam9260.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9261.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9263.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9g20.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9g25.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9g35.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9g45.dtsi         |  4 +-
 arch/arm/boot/dts/at91sam9n12.dtsi         | 25 ++-----------
 arch/arm/boot/dts/at91sam9rl.dtsi          |  4 +-
 arch/arm/boot/dts/at91sam9x25.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9x35.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9x5.dtsi          |  4 +-
 arch/arm/boot/dts/lan966x-pcb8309.dts      | 14 +++++++
 arch/arm/boot/dts/sam9x60.dtsi             |  4 +-
 arch/arm/boot/dts/sama5d2.dtsi             |  5 +--
 arch/arm/boot/dts/sama5d3.dtsi             |  4 +-
 arch/arm/boot/dts/sama5d3_emac.dtsi        |  2 +-
 arch/arm/boot/dts/sama5d4.dtsi             |  4 +-
 arch/arm/boot/dts/sama7g5.dtsi             |  2 +-
 23 files changed, 105 insertions(+), 49 deletions(-)

WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <arnd@arndb.de>, <olof@lixom.net>, <arm@kernel.org>, <soc@kernel.org>
Cc: alexandre.belloni@bootlin.com, linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] AT91 DT updates for 6.5
Date: Tue, 30 May 2023 13:59:45 +0300	[thread overview]
Message-ID: <20230530105945.11638-1-claudiu.beznea@microchip.com> (raw)

The following changes since commit ac9a78681b921877518763ba0e89202254349d1b:

  Linux 6.4-rc1 (2023-05-07 13:34:35 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/at91-dt-6.5

for you to fetch changes up to 4ceb0c70d0dae0f1327c4cfda3826b98a885f735:

  ARM: dts: at91: sama5d2: remove extra line (2023-05-24 12:15:29 +0300)

----------------------------------------------------------------
AT91 DT for 6.5

It contains:
- gpio-line-names addition for at91-tse850-3 board
- support for SMA connectors on lan966x-pcb8309 board
- use drive-open-drain as boolean property as this is how code handles
  it
- generic names for clock controller devices
- use of the new clock controller bindings for at91sam9n12 slow clock
  controller
- one blank line removal on sama5d2.dtsi

----------------------------------------------------------------
Claudiu Beznea (4):
      ARM: dts: at91: use clock-controller name for PMC nodes
      ARM: dts: at91: at91sam9n12: witch sckc to new clock bindings
      ARM: dts: at91: use clock-controller name for sckc nodes
      ARM: dts: at91: sama5d2: remove extra line

Horatiu Vultur (1):
      ARM: dts: lan966x: Add support for SMA connectors

Peter Rosin (1):
      ARM: dts: at91: tse850: add properties for gpio-line-names

Ryan Wanner (1):
      ARM: dts: at91: Return to boolean properties

 arch/arm/boot/dts/at91-kizbox3-hs.dts      |  2 +-
 arch/arm/boot/dts/at91-kizbox3_common.dtsi |  2 +-
 arch/arm/boot/dts/at91-tse850-3.dts        | 60 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/at91rm9200.dtsi          |  2 +-
 arch/arm/boot/dts/at91sam9260.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9261.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9263.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9g20.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9g25.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9g35.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9g45.dtsi         |  4 +-
 arch/arm/boot/dts/at91sam9n12.dtsi         | 25 ++-----------
 arch/arm/boot/dts/at91sam9rl.dtsi          |  4 +-
 arch/arm/boot/dts/at91sam9x25.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9x35.dtsi         |  2 +-
 arch/arm/boot/dts/at91sam9x5.dtsi          |  4 +-
 arch/arm/boot/dts/lan966x-pcb8309.dts      | 14 +++++++
 arch/arm/boot/dts/sam9x60.dtsi             |  4 +-
 arch/arm/boot/dts/sama5d2.dtsi             |  5 +--
 arch/arm/boot/dts/sama5d3.dtsi             |  4 +-
 arch/arm/boot/dts/sama5d3_emac.dtsi        |  2 +-
 arch/arm/boot/dts/sama5d4.dtsi             |  4 +-
 arch/arm/boot/dts/sama7g5.dtsi             |  2 +-
 23 files changed, 105 insertions(+), 49 deletions(-)

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-05-30 10:59 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-30 10:59 Claudiu Beznea [this message]
2023-05-30 10:59 ` [GIT PULL] AT91 DT updates for 6.5 Claudiu Beznea
2023-06-06 20:40 ` patchwork-bot+linux-soc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230530105945.11638-1-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=olof@lixom.net \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.