All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	kernel@pengutronix.de, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	NXP Linux Team <linux-imx@nxp.com>,
	Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v1 12/15] ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port
Date: Tue, 30 May 2023 14:03:42 +0200	[thread overview]
Message-ID: <20230530120345.2874900-13-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20230530120345.2874900-1-o.rempel@pengutronix.de>

USB over-current detection is supported on this board. So, activate it
and fixes the following kernel warnings:
 imx_usb 2184200.usb: No over current polarity defined

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6ul-prti6g.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
index b7c96fbe7a91..c3c50f51a5a8 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/imx6ul-prti6g.dts
@@ -177,6 +177,7 @@ &uart1 {
 
 &usbotg1 {
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
-- 
2.39.2


WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	kernel@pengutronix.de, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	NXP Linux Team <linux-imx@nxp.com>,
	Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v1 12/15] ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port
Date: Tue, 30 May 2023 14:03:42 +0200	[thread overview]
Message-ID: <20230530120345.2874900-13-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20230530120345.2874900-1-o.rempel@pengutronix.de>

USB over-current detection is supported on this board. So, activate it
and fixes the following kernel warnings:
 imx_usb 2184200.usb: No over current polarity defined

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6ul-prti6g.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
index b7c96fbe7a91..c3c50f51a5a8 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/imx6ul-prti6g.dts
@@ -177,6 +177,7 @@ &uart1 {
 
 &usbotg1 {
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-05-30 12:04 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-30 12:03 [PATCH v1 00/15] Maintenance updates for Protonic Holland boards Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 01/15] ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 02/15] ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 03/15] ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 04/15] ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 05/15] ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 06/15] ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 07/15] ARM: dts: imx6dl: Add trip points to thermal zones on several devices Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 08/15] ARM: dts: imx6dl: vicut1: Address USB related warnings Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 09/15] ARM: dts: imx6dl: alti6p: fix different " Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 10/15] ARM: dts: imx6dl: prtmvt: " Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 11/15] ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel [this message]
2023-05-30 12:03   ` [PATCH v1 12/15] ARM: dts: imx6ul: prti6g: fix USB over-current " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 13/15] ARM: dts: imx6dl: plybas: " Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 14/15] ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 15/15] ARM: dts: imx6qdl: vicut1: rename power to power-button Oleksij Rempel
2023-05-30 12:03   ` Oleksij Rempel
2023-06-04 13:08 ` [PATCH v1 00/15] Maintenance updates for Protonic Holland boards Shawn Guo
2023-06-04 13:08   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230530120345.2874900-13-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.