All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephan Gerhold <stephan@gerhold.net>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Mathieu Poirier <mathieu.poirier@linaro.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH v2 09/12] arm64: dts: qcom: Add rpm-proc node for SMD platforms
Date: Thu, 08 Jun 2023 09:10:29 +0200	[thread overview]
Message-ID: <20230531-rpm-rproc-v2-9-56a4a00c8260@gerhold.net> (raw)
In-Reply-To: <20230531-rpm-rproc-v2-0-56a4a00c8260@gerhold.net>

Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).

This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi |   6 +-
 arch/arm64/boot/dts/qcom/msm8939.dtsi | 112 ++++++++++++-------------
 arch/arm64/boot/dts/qcom/msm8953.dtsi | 136 +++++++++++++++---------------
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 152 +++++++++++++++++-----------------
 arch/arm64/boot/dts/qcom/msm8994.dtsi |  99 +++++++++++-----------
 5 files changed, 253 insertions(+), 252 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9494b6512d87..a597890a37d6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -282,10 +282,10 @@ CLUSTER_PD: power-domain-cluster {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
+	rpm: remoteproc {
+		compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
 
-		rpm {
+		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 0d9f8b951b66..d9fd48f5b506 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -240,6 +240,62 @@ pmu {
 		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	rpm: remoteproc {
+		compatible = "qcom,msm8936-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs1_mbox 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8936";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clock-names = "xo";
+					clocks = <&xo_board>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8939-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -308,62 +364,6 @@ mba_mem: mba@8cb00000 {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs1_mbox 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8936";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
-					#clock-cells = <1>;
-					clock-names = "xo";
-					clocks = <&xo_board>;
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8939-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <1>;
-						};
-
-						rpmpd_opp_svs_krait: opp2 {
-							opp-level = <2>;
-						};
-
-						rpmpd_opp_svs_soc: opp3 {
-							opp-level = <3>;
-						};
-
-						rpmpd_opp_nom: opp4 {
-							opp-level = <4>;
-						};
-
-						rpmpd_opp_turbo: opp5 {
-							opp-level = <5>;
-						};
-
-						rpmpd_opp_super_turbo: opp6 {
-							opp-level = <6>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	smp2p-hexagon {
 		compatible = "qcom,smp2p";
 		qcom,smem = <435>, <428>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 7d193a467819..9c44697aeff5 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -190,6 +190,74 @@ psci {
 		method = "smc";
 	};
 
+	rpm: remoteproc {
+		compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8953";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8953-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -263,74 +331,6 @@ rmtfs@f2d00000 {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8953";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
-					clocks = <&xo_board>;
-					clock-names = "xo";
-					#clock-cells = <1>;
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8953-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <RPM_SMD_LEVEL_RETENTION>;
-						};
-
-						rpmpd_opp_ret_plus: opp2 {
-							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
-						};
-
-						rpmpd_opp_min_svs: opp3 {
-							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
-						};
-
-						rpmpd_opp_low_svs: opp4 {
-							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
-						};
-
-						rpmpd_opp_svs: opp5 {
-							opp-level = <RPM_SMD_LEVEL_SVS>;
-						};
-
-						rpmpd_opp_svs_plus: opp6 {
-							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
-						};
-
-						rpmpd_opp_nom: opp7 {
-							opp-level = <RPM_SMD_LEVEL_NOM>;
-						};
-
-						rpmpd_opp_nom_plus: opp8 {
-							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
-						};
-
-						rpmpd_opp_turbo: opp9 {
-							opp-level = <RPM_SMD_LEVEL_TURBO>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	smp2p-adsp {
 		compatible = "qcom,smp2p";
 		qcom,smem = <443>, <429>;
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 753b9a2105ed..ab76806317a7 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -232,6 +232,82 @@ psci {
 		method = "smc";
 	};
 
+	rpm: remoteproc {
+		compatible = "qcom,msm8976-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8976";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8976-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+
+						rpmpd_opp_turbo_high: opp111 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -346,82 +422,6 @@ wcnss_smp2p_in: slave-kernel {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8976";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
-					clocks = <&xo_board>;
-					clock-names = "xo";
-					#clock-cells = <1>;
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8976-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <RPM_SMD_LEVEL_RETENTION>;
-						};
-
-						rpmpd_opp_ret_plus: opp2 {
-							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
-						};
-
-						rpmpd_opp_min_svs: opp3 {
-							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
-						};
-
-						rpmpd_opp_low_svs: opp4 {
-							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
-						};
-
-						rpmpd_opp_svs: opp5 {
-							opp-level = <RPM_SMD_LEVEL_SVS>;
-						};
-
-						rpmpd_opp_svs_plus: opp6 {
-							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
-						};
-
-						rpmpd_opp_nom: opp7 {
-							opp-level = <RPM_SMD_LEVEL_NOM>;
-						};
-
-						rpmpd_opp_nom_plus: opp8 {
-							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
-						};
-
-						rpmpd_opp_turbo: opp9 {
-							opp-level = <RPM_SMD_LEVEL_TURBO>;
-						};
-
-						rpmpd_opp_turbo_no_cpr: opp10 {
-							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
-						};
-
-						rpmpd_opp_turbo_high: opp111 {
-							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	smsm {
 		compatible = "qcom,smsm";
 
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 5a7923d7c62a..c374fba5d8f9 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -178,6 +178,56 @@ psci {
 		method = "hvc";
 	};
 
+	rpm: remoteproc {
+		compatible = "qcom,msm8994-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+			qcom,remote-pid = <6>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8994";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8994-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -237,55 +287,6 @@ reserved@6c00000 {
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-			qcom,remote-pid = <6>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8994";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
-					#clock-cells = <1>;
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8994-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <1>;
-						};
-						rpmpd_opp_svs_krait: opp2 {
-							opp-level = <2>;
-						};
-						rpmpd_opp_svs_soc: opp3 {
-							opp-level = <3>;
-						};
-						rpmpd_opp_nom: opp4 {
-							opp-level = <4>;
-						};
-						rpmpd_opp_turbo: opp5 {
-							opp-level = <5>;
-						};
-						rpmpd_opp_super_turbo: opp6 {
-							opp-level = <6>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	smem {
 		compatible = "qcom,smem";
 		memory-region = <&smem_mem>;

-- 
2.40.1


  parent reply	other threads:[~2023-06-08  7:11 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-08  7:10 [PATCH v2 00/12] Add dedicated device tree node for RPM processor/subsystem Stephan Gerhold
2023-06-08  7:10 ` [PATCH v2 01/12] dt-bindings soc: qcom: smd-rpm: Fix sort order Stephan Gerhold
2023-06-08  7:10 ` [PATCH v2 02/12] dt-bindings: soc: qcom: smd-rpm: Add MSM8909 to qcom,smd-channels Stephan Gerhold
2023-06-08  7:10 ` [PATCH v2 03/12] dt-bindings: soc: qcom: smd-rpm: Add some more compatibles Stephan Gerhold
2023-06-08  7:10 ` [PATCH v2 04/12] soc: qcom: smd-rpm: Match rpmsg channel instead of compatible Stephan Gerhold
2023-06-08  7:10 ` [PATCH v2 05/12] dt-bindings: remoteproc: Add Qualcomm RPM processor/subsystem Stephan Gerhold
2023-06-08  8:27   ` Rob Herring
2023-06-10 16:43   ` Krzysztof Kozlowski
2023-06-10 16:52     ` Stephan Gerhold
2023-06-12 18:19       ` Krzysztof Kozlowski
2023-06-08  7:10 ` [PATCH v2 06/12] soc: qcom: smem: Add qcom_smem_is_available() Stephan Gerhold
2023-06-08  7:10 ` [PATCH v2 07/12] rpmsg: qcom_smd: Use qcom_smem_is_available() Stephan Gerhold
2023-06-09 15:07   ` Konrad Dybcio
2023-06-08  7:10 ` [PATCH v2 08/12] soc: qcom: Add RPM processor/subsystem driver Stephan Gerhold
2023-06-09 15:24   ` Konrad Dybcio
2023-06-08  7:10 ` Stephan Gerhold [this message]
2023-06-08  7:10 ` [PATCH v2 10/12] arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms Stephan Gerhold
2023-06-08  7:10 ` [PATCH v2 11/12] ARM: dts: qcom: Add rpm-proc node for SMD platforms Stephan Gerhold
2023-06-09 15:26   ` Konrad Dybcio
2023-06-08  7:10 ` [PATCH v2 12/12] ARM: dts: qcom: apq8064: Drop redundant /smd node Stephan Gerhold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230531-rpm-rproc-v2-9-56a4a00c8260@gerhold.net \
    --to=stephan@gerhold.net \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.