[PATCH 01/14] arm64: dts: qcom: sc7280: Don't disable MDP explicitly

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 01/14] arm64: dts: qcom: sc7280: Don't disable MDP explicitly
Date: Wed, 31 May 2023 04:16:10 +0300	[thread overview]
Message-ID: <20230531011623.3808538-2-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230531011623.3808538-1-dmitry.baryshkov@linaro.org>

MDSS and all its subdevices are useless without DPU/MDP, so disabling
MDP doesn't make any sense. Remove explicit disabling of the DPU device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 4 ----
 arch/arm64/boot/dts/qcom/sc7280.dtsi           | 2 --
 2 files changed, 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 5b1c175c47f1..9ea6636125ad 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -467,10 +467,6 @@ &mdss_dp_out {
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
 };
 
-&mdss_mdp {
-	status = "okay";
-};
-
 /* NVMe drive, enabled on a per-board basis */
 &pcie1 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 00547192215d..1aa3c6bf81f0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3881,8 +3881,6 @@ mdss_mdp: display-controller@ae01000 {
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
 
-				status = "disabled";
-
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
-- 
2.39.2

