From: Dario Binacchi <dario.binacchi@amarulasolutions.com> To: linux-kernel@vger.kernel.org Cc: michael@amarulasolutions.com, Amarula patchwork <linux-amarula@amarulasolutions.com>, Dario Binacchi <dario.binacchi@amarulasolutions.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Conor Dooley <conor+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com Subject: [PATCH v3 3/4] ARM: dts: stm32: support display on stm32f746-disco board Date: Fri, 9 Jun 2023 08:20:49 +0200 [thread overview] Message-ID: <20230609062050.2107143-4-dario.binacchi@amarulasolutions.com> (raw) In-Reply-To: <20230609062050.2107143-1-dario.binacchi@amarulasolutions.com> Add support to Rocktech RK043FN48H display on stm32f746-disco board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- (no changes since v1) arch/arm/boot/dts/stm32f746-disco.dts | 51 +++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index c11616ed5fc6..cda423b6a874 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -60,10 +60,41 @@ memory@c0000000 { reg = <0xC0000000 0x800000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + no-map; + size = <0x80000>; + linux,dma-default; + }; + }; + aliases { serial0 = &usart1; }; + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpiok 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + panel_rgb: panel-rgb { + compatible = "rocktech,rk043fn48h"; + backlight = <&backlight>; + enable-gpios = <&gpioi 12 GPIO_ACTIVE_HIGH>; + status = "okay"; + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -99,6 +130,26 @@ &i2c1 { status = "okay"; }; +&dma1 { + status = "okay"; +}; + +&dma2 { + status = "okay"; +}; + +<dc { + pinctrl-0 = <<dc_pins_a>; + pinctrl-names = "default"; + status = "okay"; + + port { + ltdc_out_rgb: endpoint { + remote-endpoint = <&panel_in_rgb>; + }; + }; +}; + &sdio1 { status = "okay"; vmmc-supply = <&mmc_vcard>; -- 2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Dario Binacchi <dario.binacchi@amarulasolutions.com> To: linux-kernel@vger.kernel.org Cc: michael@amarulasolutions.com, Amarula patchwork <linux-amarula@amarulasolutions.com>, Dario Binacchi <dario.binacchi@amarulasolutions.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Conor Dooley <conor+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com Subject: [PATCH v3 3/4] ARM: dts: stm32: support display on stm32f746-disco board Date: Fri, 9 Jun 2023 08:20:49 +0200 [thread overview] Message-ID: <20230609062050.2107143-4-dario.binacchi@amarulasolutions.com> (raw) In-Reply-To: <20230609062050.2107143-1-dario.binacchi@amarulasolutions.com> Add support to Rocktech RK043FN48H display on stm32f746-disco board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- (no changes since v1) arch/arm/boot/dts/stm32f746-disco.dts | 51 +++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index c11616ed5fc6..cda423b6a874 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -60,10 +60,41 @@ memory@c0000000 { reg = <0xC0000000 0x800000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + no-map; + size = <0x80000>; + linux,dma-default; + }; + }; + aliases { serial0 = &usart1; }; + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpiok 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + panel_rgb: panel-rgb { + compatible = "rocktech,rk043fn48h"; + backlight = <&backlight>; + enable-gpios = <&gpioi 12 GPIO_ACTIVE_HIGH>; + status = "okay"; + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -99,6 +130,26 @@ &i2c1 { status = "okay"; }; +&dma1 { + status = "okay"; +}; + +&dma2 { + status = "okay"; +}; + +<dc { + pinctrl-0 = <<dc_pins_a>; + pinctrl-names = "default"; + status = "okay"; + + port { + ltdc_out_rgb: endpoint { + remote-endpoint = <&panel_in_rgb>; + }; + }; +}; + &sdio1 { status = "okay"; vmmc-supply = <&mmc_vcard>; -- 2.32.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-06-09 6:21 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-06-09 6:20 [PATCH v3 0/4] Add display support on the stm32f746-disco board Dario Binacchi 2023-06-09 6:20 ` Dario Binacchi 2023-06-09 6:20 ` Dario Binacchi 2023-06-09 6:20 ` [PATCH v3 1/4] ARM: dts: stm32: add ltdc support on stm32f746 MCU Dario Binacchi 2023-06-09 6:20 ` Dario Binacchi 2023-06-09 14:17 ` [Linux-stm32] " Raphael Gallais-Pou 2023-06-09 14:17 ` Raphael Gallais-Pou 2023-06-09 6:20 ` [PATCH v3 2/4] ARM: dts: stm32: add pin map for LTDC on stm32f7 Dario Binacchi 2023-06-09 6:20 ` Dario Binacchi 2023-06-09 14:23 ` [Linux-stm32] " Raphael Gallais-Pou 2023-06-09 14:23 ` Raphael Gallais-Pou 2023-06-09 6:20 ` Dario Binacchi [this message] 2023-06-09 6:20 ` [PATCH v3 3/4] ARM: dts: stm32: support display on stm32f746-disco board Dario Binacchi 2023-06-09 14:25 ` [Linux-stm32] " Raphael Gallais-Pou 2023-06-09 14:25 ` Raphael Gallais-Pou 2023-06-09 6:20 ` [PATCH v3 4/4] drm/stm: add an option to change FB bpp Dario Binacchi 2023-06-09 6:20 ` Dario Binacchi 2023-06-09 6:20 ` Dario Binacchi 2023-06-13 14:41 ` Philippe CORNU 2023-06-13 14:41 ` Philippe CORNU 2023-06-13 14:41 ` Philippe CORNU 2023-06-13 14:52 ` Michael Nazzareno Trimarchi 2023-06-13 14:52 ` Michael Nazzareno Trimarchi 2023-06-13 14:52 ` Michael Nazzareno Trimarchi 2023-06-13 15:26 ` Raphael Gallais-Pou 2023-06-13 15:26 ` Raphael Gallais-Pou 2023-06-13 15:26 ` Raphael Gallais-Pou 2023-06-13 16:59 ` Philippe CORNU 2023-06-13 16:59 ` Philippe CORNU 2023-06-13 16:59 ` Philippe CORNU
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230609062050.2107143-4-dario.binacchi@amarulasolutions.com \ --to=dario.binacchi@amarulasolutions.com \ --cc=alexandre.torgue@foss.st.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-amarula@amarulasolutions.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=michael@amarulasolutions.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.