[PATCH 14/18] ARM: dts: qcom: apq8064: add simple CPUFreq support

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Declare CPU frequency-scaling properties. Each CPU has its own clock,
how all CPUs have the same OPP table. Voltage scaling is not (yet)
enabled with this patch. It will be enabled later.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 169 ++++++++++++++++++++++++++++
 1 file changed, 169 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1eb6d752ebae..4ef13f3d702b 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,krait-cc.h>
 #include <dt-bindings/clock/qcom,lcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
@@ -45,6 +46,12 @@ CPU0: cpu@0 {
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
 			cpu-idle-states = <&CPU_SPC>;
+			clocks = <&kraitcc KRAIT_CPU_0>;
+			clock-names = "cpu";
+			clock-latency = <100000>;
+			interconnects = <&kraitcc MASTER_KRAIT_L2 &kraitcc SLAVE_KRAIT_L2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		CPU1: cpu@1 {
@@ -56,6 +63,12 @@ CPU1: cpu@1 {
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
 			cpu-idle-states = <&CPU_SPC>;
+			clocks = <&kraitcc KRAIT_CPU_1>;
+			clock-names = "cpu";
+			clock-latency = <100000>;
+			interconnects = <&kraitcc MASTER_KRAIT_L2 &kraitcc SLAVE_KRAIT_L2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		CPU2: cpu@2 {
@@ -67,6 +80,12 @@ CPU2: cpu@2 {
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
 			cpu-idle-states = <&CPU_SPC>;
+			clocks = <&kraitcc KRAIT_CPU_2>;
+			clock-names = "cpu";
+			clock-latency = <100000>;
+			interconnects = <&kraitcc MASTER_KRAIT_L2 &kraitcc SLAVE_KRAIT_L2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		CPU3: cpu@3 {
@@ -78,6 +97,12 @@ CPU3: cpu@3 {
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
 			cpu-idle-states = <&CPU_SPC>;
+			clocks = <&kraitcc KRAIT_CPU_3>;
+			clock-names = "cpu";
+			clock-latency = <100000>;
+			interconnects = <&kraitcc MASTER_KRAIT_L2 &kraitcc SLAVE_KRAIT_L2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		L2: l2-cache {
@@ -97,6 +122,121 @@ CPU_SPC: spc {
 		};
 	};
 
+        cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2-krait-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+
+		/*
+		 * Voltage thresholds are <target min max>
+		 */
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-peak-kBps = <384000>;
+			opp-supported-hw = <0x4007>;
+			/*
+			 * higher latency as it requires switching between
+			 * clock sources
+			 */
+			clock-latency-ns = <244144>;
+		};
+
+		opp-486000000 {
+			opp-hz = /bits/ 64 <486000000>;
+			opp-peak-kBps = <648000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-594000000 {
+			opp-hz = /bits/ 64 <594000000>;
+			opp-peak-kBps = <648000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-peak-kBps = <648000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-810000000 {
+			opp-hz = /bits/ 64 <810000000>;
+			opp-peak-kBps = <648000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-918000000 {
+			opp-hz = /bits/ 64 <918000000>;
+			opp-peak-kBps = <648000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-1026000000 {
+			opp-hz = /bits/ 64 <1026000000>;
+			opp-peak-kBps = <648000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-1134000000 {
+			opp-hz = /bits/ 64 <1134000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-1242000000 {
+			opp-hz = /bits/ 64 <1242000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-1350000000 {
+			opp-hz = /bits/ 64 <1350000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-1458000000 {
+			opp-hz = /bits/ 64 <1458000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x4007>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x4001>;
+		};
+
+		opp-1566000000 {
+			opp-hz = /bits/ 64 <1566000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x06>;
+		};
+
+		opp-1674000000 {
+			opp-hz = /bits/ 64 <1674000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x06>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x02>;
+		};
+
+		opp-1782000000 {
+			opp-hz = /bits/ 64 <1782000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x04>;
+		};
+
+		opp-1890000000 {
+			opp-hz = /bits/ 64 <1890000000>;
+			opp-peak-kBps = <1134000>;
+			opp-supported-hw = <0x04>;
+		};
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0>;
@@ -213,6 +353,32 @@ sleep_clk: sleep_clk {
 		};
 	};
 
+	kraitcc: clock-controller {
+		compatible = "qcom,krait-cc-v1";
+		clocks = <&gcc PLL9>, /* hfpll0 */
+			 <&gcc PLL10>, /* hfpll1 */
+			 <&gcc PLL16>, /* hfpll2 */
+			 <&gcc PLL17>, /* hfpll3 */
+			 <&gcc PLL12>, /* hfpll_l2 */
+			 <&acc0>,
+			 <&acc1>,
+			 <&acc2>,
+			 <&acc3>,
+			 <&l2cc>;
+		clock-names = "hfpll0",
+			      "hfpll1",
+			      "hfpll2",
+			      "hfpll3",
+			      "hfpll_l2",
+			      "acpu0_aux",
+			      "acpu1_aux",
+			      "acpu2_aux",
+			      "acpu3_aux",
+			      "acpu_l2_aux";
+		#clock-cells = <1>;
+		#interconnect-cells = <1>;
+	};
+
 	sfpb_mutex: hwmutex {
 		compatible = "qcom,sfpb-mutex";
 		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
@@ -834,6 +1000,9 @@ qfprom: qfprom@700000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			speedbin_efuse: speedbin@c0 {
+				reg = <0x0c0 0x4>;
+			};
 			tsens_calib: calib@404 {
 				reg = <0x404 0x10>;
 			};
-- 
2.39.2