All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: Jonathan Corbet <corbet@lwn.net>,
	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-media@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH] fbdev/media: Use GPIO descriptors for VIA GPIO
Date: Mon, 12 Jun 2023 15:45:00 +0200	[thread overview]
Message-ID: <20230612134500.249178-1-linus.walleij@linaro.org> (raw)

The VIA fbdev exposes a custom GPIO chip for its GPIOs, these
are in turn looked up the camera driver using a custom API.

Drop the custom API, provide a look-up table and convert to
GPIO descriptors. Note proper polarity on the RESET line.

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
I don't know about the merge path for this one, let's merge
it in the provider (fbdev) if possible.
This looks like OLPC stuff.
---
 drivers/media/platform/via/via-camera.c       | 51 ++++++++-----------
 drivers/video/fbdev/via/via-core.c            |  2 +-
 drivers/video/fbdev/via/via-gpio.c            | 26 +++++-----
 .../video/fbdev/via}/via-gpio.h               |  1 -
 4 files changed, 34 insertions(+), 46 deletions(-)
 rename {include/linux => drivers/video/fbdev/via}/via-gpio.h (84%)

diff --git a/drivers/media/platform/via/via-camera.c b/drivers/media/platform/via/via-camera.c
index 450254403fa8..4cb8f29e2f14 100644
--- a/drivers/media/platform/via/via-camera.c
+++ b/drivers/media/platform/via/via-camera.c
@@ -11,7 +11,7 @@
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/pci.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/videodev2.h>
@@ -26,7 +26,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/pm_qos.h>
 #include <linux/via-core.h>
-#include <linux/via-gpio.h>
 #include <linux/via_i2c.h>
 
 #ifdef CONFIG_X86
@@ -71,8 +70,8 @@ struct via_camera {
 	/*
 	 * GPIO info for power/reset management
 	 */
-	int power_gpio;
-	int reset_gpio;
+	struct gpio_desc *power_gpio;
+	struct gpio_desc *reset_gpio;
 	/*
 	 * I/O memory stuff.
 	 */
@@ -180,27 +179,19 @@ static struct via_format *via_find_format(u32 pixelformat)
  */
 static int via_sensor_power_setup(struct via_camera *cam)
 {
-	int ret;
+	struct device *dev = &cam->platdev->dev;
+
+	cam->power_gpio = devm_gpiod_get(dev, "VGPIO3", GPIOD_OUT_LOW);
+	if (IS_ERR(cam->power_gpio))
+		return dev_err_probe(dev, PTR_ERR(cam->power_gpio),
+				     "failed to get power GPIO");
+
+	/* Request the reset line asserted */
+	cam->reset_gpio = devm_gpiod_get(dev, "VGPIO2", GPIOD_OUT_HIGH);
+	if (IS_ERR(cam->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(cam->reset_gpio),
+				     "failed to get reset GPIO");
 
-	cam->power_gpio = viafb_gpio_lookup("VGPIO3");
-	cam->reset_gpio = viafb_gpio_lookup("VGPIO2");
-	if (!gpio_is_valid(cam->power_gpio) || !gpio_is_valid(cam->reset_gpio)) {
-		dev_err(&cam->platdev->dev, "Unable to find GPIO lines\n");
-		return -EINVAL;
-	}
-	ret = gpio_request(cam->power_gpio, "viafb-camera");
-	if (ret) {
-		dev_err(&cam->platdev->dev, "Unable to request power GPIO\n");
-		return ret;
-	}
-	ret = gpio_request(cam->reset_gpio, "viafb-camera");
-	if (ret) {
-		dev_err(&cam->platdev->dev, "Unable to request reset GPIO\n");
-		gpio_free(cam->power_gpio);
-		return ret;
-	}
-	gpio_direction_output(cam->power_gpio, 0);
-	gpio_direction_output(cam->reset_gpio, 0);
 	return 0;
 }
 
@@ -209,25 +200,23 @@ static int via_sensor_power_setup(struct via_camera *cam)
  */
 static void via_sensor_power_up(struct via_camera *cam)
 {
-	gpio_set_value(cam->power_gpio, 1);
-	gpio_set_value(cam->reset_gpio, 0);
+	gpiod_set_value(cam->power_gpio, 1);
+	gpiod_set_value(cam->reset_gpio, 1);
 	msleep(20);  /* Probably excessive */
-	gpio_set_value(cam->reset_gpio, 1);
+	gpiod_set_value(cam->reset_gpio, 0);
 	msleep(20);
 }
 
 static void via_sensor_power_down(struct via_camera *cam)
 {
-	gpio_set_value(cam->power_gpio, 0);
-	gpio_set_value(cam->reset_gpio, 0);
+	gpiod_set_value(cam->power_gpio, 0);
+	gpiod_set_value(cam->reset_gpio, 1);
 }
 
 
 static void via_sensor_power_release(struct via_camera *cam)
 {
 	via_sensor_power_down(cam);
-	gpio_free(cam->power_gpio);
-	gpio_free(cam->reset_gpio);
 }
 
 /* --------------------------------------------------------------------------*/
diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 2c1803eb196f..908524a74a38 100644
--- a/drivers/video/fbdev/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
@@ -11,7 +11,7 @@
 #include <linux/aperture.h>
 #include <linux/via-core.h>
 #include <linux/via_i2c.h>
-#include <linux/via-gpio.h>
+#include "via-gpio.h"
 #include "global.h"
 
 #include <linux/module.h>
diff --git a/drivers/video/fbdev/via/via-gpio.c b/drivers/video/fbdev/via/via-gpio.c
index f1b670397c02..fea5c195906f 100644
--- a/drivers/video/fbdev/via/via-gpio.c
+++ b/drivers/video/fbdev/via/via-gpio.c
@@ -7,6 +7,7 @@
 
 #include <linux/spinlock.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/via-core.h>
 #include <linux/via-gpio.h>
@@ -189,19 +190,14 @@ static struct viafb_pm_hooks viafb_gpio_pm_hooks = {
 };
 #endif /* CONFIG_PM */
 
-/*
- * Look up a specific gpio and return the number it was assigned.
- */
-int viafb_gpio_lookup(const char *name)
-{
-	int i;
-
-	for (i = 0; i < viafb_gpio_config.gpio_chip.ngpio; i++)
-		if (!strcmp(name, viafb_gpio_config.active_gpios[i]->vg_name))
-			return viafb_gpio_config.gpio_chip.base + i;
-	return -1;
-}
-EXPORT_SYMBOL_GPL(viafb_gpio_lookup);
+static struct gpiod_lookup_table viafb_gpio_table = {
+	.dev_id = "viafb-camera",
+	.table = {
+		GPIO_LOOKUP("via-gpio", 2, "VGPIO2", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("via-gpio", 3, "VGPIO3", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
 
 /*
  * Platform device stuff.
@@ -249,12 +245,16 @@ static int viafb_gpio_probe(struct platform_device *platdev)
 	 * Get registered.
 	 */
 	viafb_gpio_config.gpio_chip.base = -1;  /* Dynamic */
+	viafb_gpio_config.gpio_chip.label = "via-gpio";
 	ret = gpiochip_add_data(&viafb_gpio_config.gpio_chip,
 				&viafb_gpio_config);
 	if (ret) {
 		printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret);
 		viafb_gpio_config.gpio_chip.ngpio = 0;
 	}
+
+	gpiod_add_lookup_table(&viafb_gpio_table);
+
 #ifdef CONFIG_PM
 	viafb_pm_register(&viafb_gpio_pm_hooks);
 #endif
diff --git a/include/linux/via-gpio.h b/drivers/video/fbdev/via/via-gpio.h
similarity index 84%
rename from include/linux/via-gpio.h
rename to drivers/video/fbdev/via/via-gpio.h
index ac34668fd442..2ffedf282f7e 100644
--- a/include/linux/via-gpio.h
+++ b/drivers/video/fbdev/via/via-gpio.h
@@ -8,7 +8,6 @@
 #ifndef __VIA_GPIO_H__
 #define __VIA_GPIO_H__
 
-extern int viafb_gpio_lookup(const char *name);
 extern int viafb_gpio_init(void);
 extern void viafb_gpio_exit(void);
 #endif
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Linus Walleij <linus.walleij@linaro.org>
To: Jonathan Corbet <corbet@lwn.net>,
	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-media@vger.kernel.org
Subject: [PATCH] fbdev/media: Use GPIO descriptors for VIA GPIO
Date: Mon, 12 Jun 2023 15:45:00 +0200	[thread overview]
Message-ID: <20230612134500.249178-1-linus.walleij@linaro.org> (raw)

The VIA fbdev exposes a custom GPIO chip for its GPIOs, these
are in turn looked up the camera driver using a custom API.

Drop the custom API, provide a look-up table and convert to
GPIO descriptors. Note proper polarity on the RESET line.

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
I don't know about the merge path for this one, let's merge
it in the provider (fbdev) if possible.
This looks like OLPC stuff.
---
 drivers/media/platform/via/via-camera.c       | 51 ++++++++-----------
 drivers/video/fbdev/via/via-core.c            |  2 +-
 drivers/video/fbdev/via/via-gpio.c            | 26 +++++-----
 .../video/fbdev/via}/via-gpio.h               |  1 -
 4 files changed, 34 insertions(+), 46 deletions(-)
 rename {include/linux => drivers/video/fbdev/via}/via-gpio.h (84%)

diff --git a/drivers/media/platform/via/via-camera.c b/drivers/media/platform/via/via-camera.c
index 450254403fa8..4cb8f29e2f14 100644
--- a/drivers/media/platform/via/via-camera.c
+++ b/drivers/media/platform/via/via-camera.c
@@ -11,7 +11,7 @@
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/pci.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/videodev2.h>
@@ -26,7 +26,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/pm_qos.h>
 #include <linux/via-core.h>
-#include <linux/via-gpio.h>
 #include <linux/via_i2c.h>
 
 #ifdef CONFIG_X86
@@ -71,8 +70,8 @@ struct via_camera {
 	/*
 	 * GPIO info for power/reset management
 	 */
-	int power_gpio;
-	int reset_gpio;
+	struct gpio_desc *power_gpio;
+	struct gpio_desc *reset_gpio;
 	/*
 	 * I/O memory stuff.
 	 */
@@ -180,27 +179,19 @@ static struct via_format *via_find_format(u32 pixelformat)
  */
 static int via_sensor_power_setup(struct via_camera *cam)
 {
-	int ret;
+	struct device *dev = &cam->platdev->dev;
+
+	cam->power_gpio = devm_gpiod_get(dev, "VGPIO3", GPIOD_OUT_LOW);
+	if (IS_ERR(cam->power_gpio))
+		return dev_err_probe(dev, PTR_ERR(cam->power_gpio),
+				     "failed to get power GPIO");
+
+	/* Request the reset line asserted */
+	cam->reset_gpio = devm_gpiod_get(dev, "VGPIO2", GPIOD_OUT_HIGH);
+	if (IS_ERR(cam->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(cam->reset_gpio),
+				     "failed to get reset GPIO");
 
-	cam->power_gpio = viafb_gpio_lookup("VGPIO3");
-	cam->reset_gpio = viafb_gpio_lookup("VGPIO2");
-	if (!gpio_is_valid(cam->power_gpio) || !gpio_is_valid(cam->reset_gpio)) {
-		dev_err(&cam->platdev->dev, "Unable to find GPIO lines\n");
-		return -EINVAL;
-	}
-	ret = gpio_request(cam->power_gpio, "viafb-camera");
-	if (ret) {
-		dev_err(&cam->platdev->dev, "Unable to request power GPIO\n");
-		return ret;
-	}
-	ret = gpio_request(cam->reset_gpio, "viafb-camera");
-	if (ret) {
-		dev_err(&cam->platdev->dev, "Unable to request reset GPIO\n");
-		gpio_free(cam->power_gpio);
-		return ret;
-	}
-	gpio_direction_output(cam->power_gpio, 0);
-	gpio_direction_output(cam->reset_gpio, 0);
 	return 0;
 }
 
@@ -209,25 +200,23 @@ static int via_sensor_power_setup(struct via_camera *cam)
  */
 static void via_sensor_power_up(struct via_camera *cam)
 {
-	gpio_set_value(cam->power_gpio, 1);
-	gpio_set_value(cam->reset_gpio, 0);
+	gpiod_set_value(cam->power_gpio, 1);
+	gpiod_set_value(cam->reset_gpio, 1);
 	msleep(20);  /* Probably excessive */
-	gpio_set_value(cam->reset_gpio, 1);
+	gpiod_set_value(cam->reset_gpio, 0);
 	msleep(20);
 }
 
 static void via_sensor_power_down(struct via_camera *cam)
 {
-	gpio_set_value(cam->power_gpio, 0);
-	gpio_set_value(cam->reset_gpio, 0);
+	gpiod_set_value(cam->power_gpio, 0);
+	gpiod_set_value(cam->reset_gpio, 1);
 }
 
 
 static void via_sensor_power_release(struct via_camera *cam)
 {
 	via_sensor_power_down(cam);
-	gpio_free(cam->power_gpio);
-	gpio_free(cam->reset_gpio);
 }
 
 /* --------------------------------------------------------------------------*/
diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 2c1803eb196f..908524a74a38 100644
--- a/drivers/video/fbdev/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
@@ -11,7 +11,7 @@
 #include <linux/aperture.h>
 #include <linux/via-core.h>
 #include <linux/via_i2c.h>
-#include <linux/via-gpio.h>
+#include "via-gpio.h"
 #include "global.h"
 
 #include <linux/module.h>
diff --git a/drivers/video/fbdev/via/via-gpio.c b/drivers/video/fbdev/via/via-gpio.c
index f1b670397c02..fea5c195906f 100644
--- a/drivers/video/fbdev/via/via-gpio.c
+++ b/drivers/video/fbdev/via/via-gpio.c
@@ -7,6 +7,7 @@
 
 #include <linux/spinlock.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/via-core.h>
 #include <linux/via-gpio.h>
@@ -189,19 +190,14 @@ static struct viafb_pm_hooks viafb_gpio_pm_hooks = {
 };
 #endif /* CONFIG_PM */
 
-/*
- * Look up a specific gpio and return the number it was assigned.
- */
-int viafb_gpio_lookup(const char *name)
-{
-	int i;
-
-	for (i = 0; i < viafb_gpio_config.gpio_chip.ngpio; i++)
-		if (!strcmp(name, viafb_gpio_config.active_gpios[i]->vg_name))
-			return viafb_gpio_config.gpio_chip.base + i;
-	return -1;
-}
-EXPORT_SYMBOL_GPL(viafb_gpio_lookup);
+static struct gpiod_lookup_table viafb_gpio_table = {
+	.dev_id = "viafb-camera",
+	.table = {
+		GPIO_LOOKUP("via-gpio", 2, "VGPIO2", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("via-gpio", 3, "VGPIO3", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
 
 /*
  * Platform device stuff.
@@ -249,12 +245,16 @@ static int viafb_gpio_probe(struct platform_device *platdev)
 	 * Get registered.
 	 */
 	viafb_gpio_config.gpio_chip.base = -1;  /* Dynamic */
+	viafb_gpio_config.gpio_chip.label = "via-gpio";
 	ret = gpiochip_add_data(&viafb_gpio_config.gpio_chip,
 				&viafb_gpio_config);
 	if (ret) {
 		printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret);
 		viafb_gpio_config.gpio_chip.ngpio = 0;
 	}
+
+	gpiod_add_lookup_table(&viafb_gpio_table);
+
 #ifdef CONFIG_PM
 	viafb_pm_register(&viafb_gpio_pm_hooks);
 #endif
diff --git a/include/linux/via-gpio.h b/drivers/video/fbdev/via/via-gpio.h
similarity index 84%
rename from include/linux/via-gpio.h
rename to drivers/video/fbdev/via/via-gpio.h
index ac34668fd442..2ffedf282f7e 100644
--- a/include/linux/via-gpio.h
+++ b/drivers/video/fbdev/via/via-gpio.h
@@ -8,7 +8,6 @@
 #ifndef __VIA_GPIO_H__
 #define __VIA_GPIO_H__
 
-extern int viafb_gpio_lookup(const char *name);
 extern int viafb_gpio_init(void);
 extern void viafb_gpio_exit(void);
 #endif
-- 
2.34.1


             reply	other threads:[~2023-06-12 13:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-12 13:45 Linus Walleij [this message]
2023-06-12 13:45 ` [PATCH] fbdev/media: Use GPIO descriptors for VIA GPIO Linus Walleij
2023-06-12 22:23 ` kernel test robot
2023-06-12 22:23   ` kernel test robot
2023-06-12 23:36 ` kernel test robot
2023-06-12 23:36   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230612134500.249178-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=FlorianSchandinat@gmx.de \
    --cc=corbet@lwn.net \
    --cc=deller@gmx.de \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.