From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH v2 1/4] arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM
Date: Tue, 20 Jun 2023 13:05:34 +0200 [thread overview]
Message-ID: <20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org> (raw)
In-Reply-To: <20230614-topic-edo_pinsgpiopmic-v2-0-6f90bba54c53@linaro.org>
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the PDX203&206 DTSIs to better document the hardware.
Diff between 203 and 206:
< "CAM_PWR_A_CS",
> "FRONTC_PWR_EN",
< "CAM4_MCLK",
< "TOF_RST_N",
> "NC",
> "NC",
< "WLC_I2C_SDA",
< "WLC_I2C_SCL", /* GPIO_120 */
> "NC",
> "NC",
< "WLC_INT_N",
> "NC",
Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../dts/qcom/sm8250-sony-xperia-edo-pdx203.dts | 183 +++++++++++++++++++++
.../dts/qcom/sm8250-sony-xperia-edo-pdx206.dts | 183 +++++++++++++++++++++
2 files changed, 366 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
index 356a81698731..84104d2b2010 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -14,3 +14,186 @@ / {
};
/delete-node/ &vreg_l7f_1p8;
+
+&tlmm {
+ gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+ "MDM2AP_ERR_FATAL",
+ "AP_CTI_OUT",
+ "MDM2AP_STATUS",
+ "NFC_I2C_SDA",
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "NFC_ESE_PWR_REQ",
+ "DVDT_WRT_DET_AND",
+ "SPK_AMP_RESET_N", /* GPIO_10 */
+ "SPK_AMP_INT_N",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "TX_GTR_THRES_IN",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX",
+ "HST_BT_UART_RX",
+ "HST_WLAN_EN", /* GPIO_20 */
+ "HST_BT_EN",
+ "RGBC_IR_PWR_EN",
+ "FP_INT_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+ "NFC_ESE_SPI_CS_N",
+ "WCD_RST_N",
+ "NC",
+ "SDM_DEBUG_UART_TX",
+ "SDM_DEBUG_UART_RX",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "TS_INT_N",
+ "FP_SPI_MISO", /* GPIO_40 */
+ "FP_SPI_MOSI",
+ "FP_SPI_SCLK",
+ "FP_SPI_CS_N",
+ "APPS_I2C_0_SDA",
+ "APPS_I2C_0_SCL",
+ "DISP_ERR_FG",
+ "UIM2_DETECT_EN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_50 */
+ "NC",
+ "MDM_UART_CTS",
+ "MDM_UART_RFR",
+ "MDM_UART_TX",
+ "MDM_UART_RX",
+ "AP2MDM_STATUS",
+ "AP2MDM_ERR_FATAL",
+ "MDM_IPC_HS_UART_TX",
+ "MDM_IPC_HS_UART_RX",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_PWR_B_CS",
+ "NC", /* GPIO_70 */
+ "CAM_PWR_A_CS",
+ "SBU_SW_SEL",
+ "SBU_SW_OE",
+ "FP_RESET_N",
+ "FP_RESET_N",
+ "DISP_RESET_N",
+ "DEBUG_GPIO0",
+ "TRAY_DET",
+ "CAM2_RST_N",
+ "PCIE0_RST_N",
+ "PCIE0_CLK_REQ_N", /* GPIO_80 */
+ "PCIE0_WAKE_N",
+ "DVDT_ENABLE",
+ "DVDT_WRT_DET_OR",
+ "NC",
+ "PCIE2_RST_N",
+ "PCIE2_CLK_REQ_N",
+ "PCIE2_WAKE_N",
+ "MDM_VFR_IRQ0",
+ "MDM_VFR_IRQ1",
+ "SW_SERVICE", /* GPIO_90 */
+ "CAM_SOF",
+ "CAM1_RST_N",
+ "CAM0_RST_N",
+ "CAM0_MCLK",
+ "CAM1_MCLK",
+ "CAM2_MCLK",
+ "CAM3_MCLK",
+ "CAM4_MCLK",
+ "TOF_RST_N",
+ "NC", /* GPIO_100 */
+ "CCI0_I2C_SDA",
+ "CCI0_I2C_SCL",
+ "CCI1_I2C_SDA",
+ "CCI1_I2C_SCL_",
+ "CCI2_I2C_SDA",
+ "CCI2_I2C_SCL",
+ "CCI3_I2C_SDA",
+ "CCI3_I2C_SCL",
+ "CAM3_RST_N",
+ "NFC_DWL_REQ", /* GPIO_110 */
+ "NFC_IRQ",
+ "XVS",
+ "NC",
+ "RF_ID_EXTENSION",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC",
+ "NC",
+ "WLC_I2C_SDA",
+ "WLC_I2C_SCL", /* GPIO_120 */
+ "ACC_COVER_OPEN",
+ "ALS_PROX_INT_N",
+ "ACCEL_INT",
+ "WLAN_SW_CTRL",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "UDON_SWITCH_SEL",
+ "WDOG_DISABLE",
+ "BAROMETER_INT",
+ "NC", /* GPIO_130 */
+ "NC",
+ "FORCED_USB_BOOT",
+ "NC",
+ "NC",
+ "WLC_INT_N",
+ "NC",
+ "NC",
+ "RGBC_IR_INT",
+ "NC",
+ "NC", /* GPIO_140 */
+ "NC",
+ "BT_SLIMBUS_CLK",
+ "BT_SLIMBUS_DATA",
+ "HW_ID_0",
+ "HW_ID_1",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0", /* GPIO_150 */
+ "WCD_SWR_RX_DATA1",
+ "SDM_DMIC_CLK1",
+ "SDM_DMIC_DATA1",
+ "SDM_DMIC_CLK2",
+ "SDM_DMIC_DATA2",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN",
+ "SPK_AMP_I2S_ASP_DOUT",
+ "COMPASS_I2C_SDA", /* GPIO_160 */
+ "COMPASS_I2C_SCL",
+ "NC",
+ "NC",
+ "SSC_SPI_1_MISO",
+ "SSC_SPI_1_MOSI",
+ "SSC_SPI_1_CLK",
+ "SSC_SPI_1_CS_N",
+ "NC",
+ "NC",
+ "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+ "SSC_SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_SNS_UART6_TX",
+ "HST_BLE_SNS_UART6_RX",
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
index 01fe3974ee72..fae6568cb79e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -30,6 +30,189 @@ g-assist-key {
};
};
+&tlmm {
+ gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+ "MDM2AP_ERR_FATAL",
+ "AP_CTI_OUT",
+ "MDM2AP_STATUS",
+ "NFC_I2C_SDA",
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "NFC_ESE_PWR_REQ",
+ "DVDT_WRT_DET_AND",
+ "SPK_AMP_RESET_N", /* GPIO_10 */
+ "SPK_AMP_INT_N",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "TX_GTR_THRES_IN",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX",
+ "HST_BT_UART_RX",
+ "HST_WLAN_EN", /* GPIO_20 */
+ "HST_BT_EN",
+ "RGBC_IR_PWR_EN",
+ "FP_INT_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+ "NFC_ESE_SPI_CS_N",
+ "WCD_RST_N",
+ "NC",
+ "SDM_DEBUG_UART_TX",
+ "SDM_DEBUG_UART_RX",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "TS_INT_N",
+ "FP_SPI_MISO", /* GPIO_40 */
+ "FP_SPI_MOSI",
+ "FP_SPI_SCLK",
+ "FP_SPI_CS_N",
+ "APPS_I2C_0_SDA",
+ "APPS_I2C_0_SCL",
+ "DISP_ERR_FG",
+ "UIM2_DETECT_EN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_50 */
+ "NC",
+ "MDM_UART_CTS",
+ "MDM_UART_RFR",
+ "MDM_UART_TX",
+ "MDM_UART_RX",
+ "AP2MDM_STATUS",
+ "AP2MDM_ERR_FATAL",
+ "MDM_IPC_HS_UART_TX",
+ "MDM_IPC_HS_UART_RX",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_PWR_B_CS",
+ "NC", /* GPIO_70 */
+ "FRONTC_PWR_EN",
+ "SBU_SW_SEL",
+ "SBU_SW_OE",
+ "FP_RESET_N",
+ "FP_RESET_N",
+ "DISP_RESET_N",
+ "DEBUG_GPIO0",
+ "TRAY_DET",
+ "CAM2_RST_N",
+ "PCIE0_RST_N",
+ "PCIE0_CLK_REQ_N", /* GPIO_80 */
+ "PCIE0_WAKE_N",
+ "DVDT_ENABLE",
+ "DVDT_WRT_DET_OR",
+ "NC",
+ "PCIE2_RST_N",
+ "PCIE2_CLK_REQ_N",
+ "PCIE2_WAKE_N",
+ "MDM_VFR_IRQ0",
+ "MDM_VFR_IRQ1",
+ "SW_SERVICE", /* GPIO_90 */
+ "CAM_SOF",
+ "CAM1_RST_N",
+ "CAM0_RST_N",
+ "CAM0_MCLK",
+ "CAM1_MCLK",
+ "CAM2_MCLK",
+ "CAM3_MCLK",
+ "NC",
+ "NC",
+ "NC", /* GPIO_100 */
+ "CCI0_I2C_SDA",
+ "CCI0_I2C_SCL",
+ "CCI1_I2C_SDA",
+ "CCI1_I2C_SCL_",
+ "CCI2_I2C_SDA",
+ "CCI2_I2C_SCL",
+ "CCI3_I2C_SDA",
+ "CCI3_I2C_SCL",
+ "CAM3_RST_N",
+ "NFC_DWL_REQ", /* GPIO_110 */
+ "NFC_IRQ",
+ "XVS",
+ "NC",
+ "RF_ID_EXTENSION",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "ACC_COVER_OPEN",
+ "ALS_PROX_INT_N",
+ "ACCEL_INT",
+ "WLAN_SW_CTRL",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "UDON_SWITCH_SEL",
+ "WDOG_DISABLE",
+ "BAROMETER_INT",
+ "NC", /* GPIO_130 */
+ "NC",
+ "FORCED_USB_BOOT",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "RGBC_IR_INT",
+ "NC",
+ "NC", /* GPIO_140 */
+ "NC",
+ "BT_SLIMBUS_CLK",
+ "BT_SLIMBUS_DATA",
+ "HW_ID_0",
+ "HW_ID_1",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0", /* GPIO_150 */
+ "WCD_SWR_RX_DATA1",
+ "SDM_DMIC_CLK1",
+ "SDM_DMIC_DATA1",
+ "SDM_DMIC_CLK2",
+ "SDM_DMIC_DATA2",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN",
+ "SPK_AMP_I2S_ASP_DOUT",
+ "COMPASS_I2C_SDA", /* GPIO_160 */
+ "COMPASS_I2C_SCL",
+ "NC",
+ "NC",
+ "SSC_SPI_1_MISO",
+ "SSC_SPI_1_MOSI",
+ "SSC_SPI_1_CLK",
+ "SSC_SPI_1_CS_N",
+ "NC",
+ "NC",
+ "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+ "SSC_SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_SNS_UART6_TX",
+ "HST_BLE_SNS_UART6_RX",
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};
+
&vreg_l2f_1p3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
--
2.41.0
next prev parent reply other threads:[~2023-06-20 11:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-20 11:05 [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Konrad Dybcio
2023-06-20 11:05 ` Konrad Dybcio [this message]
2023-06-20 11:05 ` [PATCH v2 2/4] arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs Konrad Dybcio
2023-06-20 11:05 ` [PATCH v2 3/4] arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC Konrad Dybcio
2023-06-20 11:05 ` [PATCH v2 4/4] arm64: dts: qcom: sm8250-edo: Rectify gpio-keys Konrad Dybcio
2023-07-10 5:07 ` [PATCH v2 0/4] SM8250 Edo pins, keys & pmic Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.