All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Walle <mwalle@kernel.org>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Michael Walle <michael@walle.cc>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Michael Walle <mwalle@kernel.org>
Subject: [PATCH 3/3] ARM: dts: lan966x: kontron-d10: add PHY interrupts
Date: Fri, 16 Jun 2023 15:18:41 +0200	[thread overview]
Message-ID: <20230616-feature-d10-dt-cleanups-v1-3-50dd0452b8fe@kernel.org> (raw)
In-Reply-To: <20230616-feature-d10-dt-cleanups-v1-0-50dd0452b8fe@kernel.org>

With interrupt handling fixed in the MaxLinear PHY driver, see commit
97a89ed101bb ("net: phy: mxl-gpy: disable interrupts on GPY215 by
default"), we can finally add the correct interrupt description to the
device tree.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts |  2 ++
 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi   | 13 +++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
index 5feef9a59a79..ad5d8b56e6fa 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -15,10 +15,12 @@ / {
 &mdio0 {
 	phy2: ethernet-phy@3 {
 		reg = <3>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	phy3: ethernet-phy@4 {
 		reg = <4>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 2e16217ac88e..83a1c23887e7 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -49,6 +49,9 @@ spi3: spi@400 {
 };
 
 &gpio {
+	pinctrl-0 = <&phy_int_pins>;
+	pinctrl-names = "default";
+
 	fc3_b_pins: fc3-b-pins {
 		/* SCK, MISO, MOSI */
 		pins = "GPIO_51", "GPIO_52", "GPIO_53";
@@ -61,6 +64,12 @@ miim_c_pins: miim-c-pins {
 		function = "miim_c";
 	};
 
+	phy_int_pins: phy-int-pins {
+		/* PHY_INT# */
+		pins = "GPIO_24";
+		function = "gpio";
+	};
+
 	reset_pins: reset-pins {
 		/* SYS_RST# */
 		pins = "GPIO_56";
@@ -107,21 +116,25 @@ &mdio0 {
 
 	phy4: ethernet-phy@5 {
 		reg = <5>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy5: ethernet-phy@6 {
 		reg = <6>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy6: ethernet-phy@7 {
 		reg = <7>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 
 	phy7: ethernet-phy@8 {
 		reg = <8>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
 		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
 	};
 };

-- 
2.30.2


  parent reply	other threads:[~2023-06-16 13:19 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-16 13:18 [PATCH 0/3] ARM: dts: lan966x: kontron-d10: device tree updates Michael Walle
2023-06-16 13:18 ` [PATCH 1/3] ARM: dts: lan966x: kontron-d10: fix board reset Michael Walle
2023-06-16 13:18 ` [PATCH 2/3] ARM: dts: lan966x: kontron-d10: fix SPI CS Michael Walle
2023-06-16 13:18 ` Michael Walle [this message]
2023-06-21  9:31 ` [PATCH 0/3] ARM: dts: lan966x: kontron-d10: device tree updates Claudiu.Beznea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230616-feature-d10-dt-cleanups-v1-3-50dd0452b8fe@kernel.org \
    --to=mwalle@kernel.org \
    --cc=claudiu.beznea@microchip.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.