From: <cristian.birsan@microchip.com>
To: <arnd@arndb.de>, <olof@lixom.net>, <soc@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Cristian Birsan <cristian.birsan@microchip.com>
Subject: [PATCH] arm: dts: Enable device-tree overlay support for AT91 boards
Date: Fri, 16 Jun 2023 18:29:32 +0300 [thread overview]
Message-ID: <20230616152932.1484154-1-cristian.birsan@microchip.com> (raw)
From: Cristian Birsan <cristian.birsan@microchip.com>
Add the '-@' DTC option for AT91 boards that have device-tree overlays.
This option populates the '__symbols__' node that contains all the
necessary symbols for supporting device-tree overlays (from bootloader)
on these devices.
This change increases the size of the resulting DTB with ~30%-40%. Below
are the measurements performed v6.4-rc6:
at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes
at91-sam9x60ek.dtb 30867 -> 39609 bytes
at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes
at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes
at91-sama5d2_icp.dtb 27521 -> 36155 bytes
at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes
at91-sama5d2_xplained.dtb 27262 -> 35326 bytes
at91-sama5d3_eds.dtb 27924 -> 39939 bytes
at91-sama5d3_xplained.dtb 28400 -> 40650 bytes
at91-sama5d4_xplained.dtb 26456 -> 36107 bytes
at91-sama7g5ek.dtb 29212 -> 37289 bytes
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
---
arch/arm/boot/dts/Makefile | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc90315..38b82af2bf69 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -50,9 +50,21 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sam9x60_curiosity := -@
+DTC_FLAGS_at91-sam9x60ek := -@
dtb-$(CONFIG_SOC_SAM9X60) += \
at91-sam9x60_curiosity.dtb \
at91-sam9x60ek.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sama5d27_som1_ek := -@
+DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
+DTC_FLAGS_at91-sama5d2_icp := -@
+DTC_FLAGS_at91-sama5d2_ptc_ek := -@
+DTC_FLAGS_at91-sama5d2_xplained := -@
+DTC_FLAGS_at91-sama5d3_eds := -@
+DTC_FLAGS_at91-sama5d3_xplained := -@
+DTC_FLAGS_at91-sama5d4_xplained := -@
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2-2.dtb \
at91-kizbox3-hs.dtb \
@@ -79,6 +91,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb \
at91-vinco.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sama7g5ek := -@
dtb-$(CONFIG_SOC_SAMA7G5) += \
at91-sama7g5ek.dtb
dtb-$(CONFIG_SOC_SP7021) += \
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: <cristian.birsan@microchip.com>
To: <arnd@arndb.de>, <olof@lixom.net>, <soc@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Cristian Birsan <cristian.birsan@microchip.com>
Subject: [PATCH] arm: dts: Enable device-tree overlay support for AT91 boards
Date: Fri, 16 Jun 2023 18:29:32 +0300 [thread overview]
Message-ID: <20230616152932.1484154-1-cristian.birsan@microchip.com> (raw)
From: Cristian Birsan <cristian.birsan@microchip.com>
Add the '-@' DTC option for AT91 boards that have device-tree overlays.
This option populates the '__symbols__' node that contains all the
necessary symbols for supporting device-tree overlays (from bootloader)
on these devices.
This change increases the size of the resulting DTB with ~30%-40%. Below
are the measurements performed v6.4-rc6:
at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes
at91-sam9x60ek.dtb 30867 -> 39609 bytes
at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes
at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes
at91-sama5d2_icp.dtb 27521 -> 36155 bytes
at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes
at91-sama5d2_xplained.dtb 27262 -> 35326 bytes
at91-sama5d3_eds.dtb 27924 -> 39939 bytes
at91-sama5d3_xplained.dtb 28400 -> 40650 bytes
at91-sama5d4_xplained.dtb 26456 -> 36107 bytes
at91-sama7g5ek.dtb 29212 -> 37289 bytes
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
---
arch/arm/boot/dts/Makefile | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc90315..38b82af2bf69 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -50,9 +50,21 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sam9x60_curiosity := -@
+DTC_FLAGS_at91-sam9x60ek := -@
dtb-$(CONFIG_SOC_SAM9X60) += \
at91-sam9x60_curiosity.dtb \
at91-sam9x60ek.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sama5d27_som1_ek := -@
+DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
+DTC_FLAGS_at91-sama5d2_icp := -@
+DTC_FLAGS_at91-sama5d2_ptc_ek := -@
+DTC_FLAGS_at91-sama5d2_xplained := -@
+DTC_FLAGS_at91-sama5d3_eds := -@
+DTC_FLAGS_at91-sama5d3_xplained := -@
+DTC_FLAGS_at91-sama5d4_xplained := -@
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2-2.dtb \
at91-kizbox3-hs.dtb \
@@ -79,6 +91,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb \
at91-vinco.dtb
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sama7g5ek := -@
dtb-$(CONFIG_SOC_SAMA7G5) += \
at91-sama7g5ek.dtb
dtb-$(CONFIG_SOC_SP7021) += \
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-06-16 15:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-16 15:29 cristian.birsan [this message]
2023-06-16 15:29 ` [PATCH] arm: dts: Enable device-tree overlay support for AT91 boards cristian.birsan
2023-06-20 21:21 ` patchwork-bot+linux-soc
2023-06-21 9:31 ` Claudiu.Beznea
2023-06-21 9:31 ` Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230616152932.1484154-1-cristian.birsan@microchip.com \
--to=cristian.birsan@microchip.com \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.