All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
	Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH v2] mmc: sdhci-f-sdh30: Replace with sdhci_pltfm
Date: Fri, 30 Jun 2023 09:45:33 +0900	[thread overview]
Message-ID: <20230630004533.26644-1-hayashi.kunihiko@socionext.com> (raw)

Even if sdhci_pltfm_pmops is specified for PM, this driver doesn't apply
sdhci_pltfm, so the structure is not correctly referenced in PM functions.
This applies sdhci_pltfm to this driver to fix this issue.

- Call sdhci_pltfm_init() instead of sdhci_alloc_host() and
  other functions that covered by sdhci_pltfm.
- Move ops and quirks to sdhci_pltfm_data
- Replace sdhci_priv() with own private function sdhci_f_sdh30_priv().

Fixes: 87a507459f49 ("mmc: sdhci: host: add new f_sdh30")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci_f_sdh30.c | 60 ++++++++++++++------------------
 1 file changed, 27 insertions(+), 33 deletions(-)

Changes since v1:
- Add Fixes and Acked-by tags

diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c
index a202a69a4b08..b01ffb4d0973 100644
--- a/drivers/mmc/host/sdhci_f_sdh30.c
+++ b/drivers/mmc/host/sdhci_f_sdh30.c
@@ -29,9 +29,16 @@ struct f_sdhost_priv {
 	bool enable_cmd_dat_delay;
 };
 
+static void *sdhci_f_sdhost_priv(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	return sdhci_pltfm_priv(pltfm_host);
+}
+
 static void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host)
 {
-	struct f_sdhost_priv *priv = sdhci_priv(host);
+	struct f_sdhost_priv *priv = sdhci_f_sdhost_priv(host);
 	u32 ctrl = 0;
 
 	usleep_range(2500, 3000);
@@ -64,7 +71,7 @@ static unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host)
 
 static void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask)
 {
-	struct f_sdhost_priv *priv = sdhci_priv(host);
+	struct f_sdhost_priv *priv = sdhci_f_sdhost_priv(host);
 	u32 ctl;
 
 	if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0)
@@ -95,30 +102,32 @@ static const struct sdhci_ops sdhci_f_sdh30_ops = {
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
+static const struct sdhci_pltfm_data sdhci_f_sdh30_pltfm_data = {
+	.ops = &sdhci_f_sdh30_ops,
+	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
+		| SDHCI_QUIRK_INVERTED_WRITE_PROTECT,
+	.quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE
+		|  SDHCI_QUIRK2_TUNING_WORK_AROUND,
+};
+
 static int sdhci_f_sdh30_probe(struct platform_device *pdev)
 {
 	struct sdhci_host *host;
 	struct device *dev = &pdev->dev;
-	int irq, ctrl = 0, ret = 0;
+	int ctrl = 0, ret = 0;
 	struct f_sdhost_priv *priv;
+	struct sdhci_pltfm_host *pltfm_host;
 	u32 reg = 0;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
-	host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv));
+	host = sdhci_pltfm_init(pdev, &sdhci_f_sdh30_pltfm_data,
+				sizeof(struct f_sdhost_priv));
 	if (IS_ERR(host))
 		return PTR_ERR(host);
 
-	priv = sdhci_priv(host);
+	pltfm_host = sdhci_priv(host);
+	priv = sdhci_pltfm_priv(pltfm_host);
 	priv->dev = dev;
 
-	host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
-		       SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
-	host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
-			SDHCI_QUIRK2_TUNING_WORK_AROUND;
-
 	priv->enable_cmd_dat_delay = device_property_read_bool(dev,
 						"fujitsu,cmd-dat-delay-select");
 
@@ -126,18 +135,6 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
 	if (ret)
 		goto err;
 
-	platform_set_drvdata(pdev, host);
-
-	host->hw_name = "f_sdh30";
-	host->ops = &sdhci_f_sdh30_ops;
-	host->irq = irq;
-
-	host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(host->ioaddr)) {
-		ret = PTR_ERR(host->ioaddr);
-		goto err;
-	}
-
 	if (dev_of_node(dev)) {
 		sdhci_get_of_property(pdev);
 
@@ -204,24 +201,21 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
 err_clk:
 	clk_disable_unprepare(priv->clk_iface);
 err:
-	sdhci_free_host(host);
+	sdhci_pltfm_free(pdev);
+
 	return ret;
 }
 
 static int sdhci_f_sdh30_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct f_sdhost_priv *priv = sdhci_priv(host);
-
-	sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) ==
-			  0xffffffff);
+	struct f_sdhost_priv *priv = sdhci_f_sdhost_priv(host);
 
 	reset_control_assert(priv->rst);
 	clk_disable_unprepare(priv->clk);
 	clk_disable_unprepare(priv->clk_iface);
 
-	sdhci_free_host(host);
-	platform_set_drvdata(pdev, NULL);
+	sdhci_pltfm_unregister(pdev);
 
 	return 0;
 }
-- 
2.25.1


             reply	other threads:[~2023-06-30  0:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-30  0:45 Kunihiko Hayashi [this message]
2023-07-13 11:06 ` [PATCH v2] mmc: sdhci-f-sdh30: Replace with sdhci_pltfm Ulf Hansson
2023-07-13 11:38   ` Kunihiko Hayashi
2023-07-14  9:29     ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230630004533.26644-1-hayashi.kunihiko@socionext.com \
    --to=hayashi.kunihiko@socionext.com \
    --cc=adrian.hunter@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.