All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhu Ning <zhuning0077@gmail.com>
To: alsa-devel@alsa-project.org, broonie@kernel.org
Cc: pierre-louis.bossart@linux.intel.com, tiwai@suse.com,
	amadeuszx.slawinski@linux.intel.com,
	yangxiaohua@everest-semi.com, zhuning@everest-semi.com,
	Zhu Ning <zhuning0077@gmail.com>
Subject: [PATCH v1 4/5] ASOC: codecs: ES8326: Add calibration support for version_b
Date: Fri, 14 Jul 2023 11:24:52 +0800	[thread overview]
Message-ID: <20230714032453.3334-4-zhuning0077@gmail.com> (raw)
In-Reply-To: <20230714032453.3334-1-zhuning0077@gmail.com>

Version_b requires a new way of calibrating headset offset. A new
calibration function is added.

Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
---
 sound/soc/codecs/es8326.c | 83 ++++++++++++++++++++++++++++++++-------
 1 file changed, 68 insertions(+), 15 deletions(-)

diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c
index 653b09600887..0474bfd79aa5 100644
--- a/sound/soc/codecs/es8326.c
+++ b/sound/soc/codecs/es8326.c
@@ -388,6 +388,7 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction)
 {
 	struct snd_soc_component *component = dai->component;
 	struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component);
+	unsigned int offset_l, offset_r;
 
 	if (mute) {
 		regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_OFF);
@@ -398,10 +399,16 @@ static int es8326_mute(struct snd_soc_dai *dai, int mute, int direction)
 		if (!es8326->calibrated) {
 			regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_FORCE_CAL);
 			msleep(30);
+			regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_OFF);
+			regmap_read(es8326->regmap, ES8326_HPL_OFFSET_INI, &offset_l);
+			regmap_read(es8326->regmap, ES8326_HPR_OFFSET_INI, &offset_r);
+			regmap_write(es8326->regmap, ES8326_HP_OFFSET_CAL, 0x8c);
+			regmap_write(es8326->regmap, ES8326_HPL_OFFSET_INI, offset_l);
+			regmap_write(es8326->regmap, ES8326_HPR_OFFSET_INI, offset_r);
 			es8326->calibrated = true;
 		}
 		regmap_write(es8326->regmap, ES8326_HP_DRIVER, 0xa0);
-		regmap_write(es8326->regmap, ES8326_HP_VOL, 0x00);
+		regmap_write(es8326->regmap, ES8326_HP_VOL, 0x80);
 		regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_ON);
 		regmap_update_bits(es8326->regmap, ES8326_DAC_MUTE,
 				ES8326_MUTE_MASK, ~(ES8326_MUTE));
@@ -420,15 +427,17 @@ static int es8326_set_bias_level(struct snd_soc_component *codec,
 		ret = clk_prepare_enable(es8326->mclk);
 		if (ret)
 			return ret;
-		regmap_write(es8326->regmap, ES8326_RESET, ES8326_PWRUP_SEQ_EN);
-		regmap_write(es8326->regmap, ES8326_INTOUT_IO, 0x45);
+
+		regmap_write(es8326->regmap, ES8326_RESET, 0x9f);
+		msleep(20);
+		regmap_update_bits(es8326->regmap, ES8326_DAC_DSM, 0x01, 0x00);
+		regmap_write(es8326->regmap, ES8326_INTOUT_IO, es8326->interrupt_clk);
 		regmap_write(es8326->regmap, ES8326_SDINOUT1_IO,
 			    (ES8326_IO_DMIC_CLK << ES8326_SDINOUT1_SHIFT));
-		regmap_write(es8326->regmap, ES8326_SDINOUT23_IO, ES8326_IO_INPUT);
-		regmap_write(es8326->regmap, ES8326_CLK_RESAMPLE, 0x05);
-		regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x02);
+		regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x0E);
 		regmap_write(es8326->regmap, ES8326_PGA_PDN, 0x40);
-		regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0xAA);
+		regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x00);
+		regmap_update_bits(es8326->regmap,  ES8326_CLK_CTL, 0x20, 0x20);
 		regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_ON);
 		break;
 	case SND_SOC_BIAS_PREPARE:
@@ -437,15 +446,10 @@ static int es8326_set_bias_level(struct snd_soc_component *codec,
 		break;
 	case SND_SOC_BIAS_OFF:
 		clk_disable_unprepare(es8326->mclk);
-		regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0x11);
-		regmap_write(es8326->regmap, ES8326_RESET, ES8326_CSM_OFF);
-		regmap_write(es8326->regmap, ES8326_PGA_PDN, 0xF8);
+		regmap_write(es8326->regmap, ES8326_ANA_PDN, 0x3b);
 		regmap_write(es8326->regmap, ES8326_VMIDSEL, 0x00);
-		regmap_write(es8326->regmap, ES8326_INT_SOURCE, 0x08);
+		regmap_update_bits(es8326->regmap, ES8326_CLK_CTL, 0x20, 0x00);
 		regmap_write(es8326->regmap, ES8326_SDINOUT1_IO, ES8326_IO_INPUT);
-		regmap_write(es8326->regmap, ES8326_SDINOUT23_IO, ES8326_IO_INPUT);
-		regmap_write(es8326->regmap, ES8326_RESET,
-			     ES8326_CODEC_RESET | ES8326_PWRUP_SEQ_EN);
 		break;
 	}
 
@@ -635,6 +639,54 @@ static irqreturn_t es8326_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int es8326_calibrate(struct snd_soc_component *component)
+{
+	struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component);
+	unsigned int reg;
+	unsigned int offset_l, offset_r;
+
+	regmap_read(es8326->regmap, ES8326_CHIP_VERSION, &reg);
+	es8326->version = reg;
+
+	if ((es8326->version == ES8326_VERSION_B) && (es8326->calibrated == false)) {
+		dev_dbg(component->dev, "ES8326_VERSION_B, calibrating\n");
+		regmap_write(es8326->regmap, ES8326_CLK_INV, 0xc0);
+		regmap_write(es8326->regmap, ES8326_CLK_DIV1, 0x01);
+		regmap_write(es8326->regmap, ES8326_CLK_DLL, 0x30);
+		regmap_write(es8326->regmap, ES8326_CLK_MUX, 0xed);
+		regmap_write(es8326->regmap, ES8326_CLK_TRI, 0xc1);
+		regmap_write(es8326->regmap, ES8326_DAC_MUTE, 0x03);
+		regmap_write(es8326->regmap, ES8326_ANA_VSEL, 0x7f);
+		regmap_write(es8326->regmap, ES8326_VMIDLOW, 0x33);
+		regmap_write(es8326->regmap, ES8326_DAC2HPMIX, 0x88);
+		regmap_write(es8326->regmap, ES8326_HP_VOL, 0x80);
+		regmap_write(es8326->regmap, ES8326_HP_OFFSET_CAL, 0x8c);
+		regmap_write(es8326->regmap, ES8326_RESET, 0xc0);
+		usleep_range(15000, 20000);
+
+		regmap_write(es8326->regmap, ES8326_HP_OFFSET_CAL, ES8326_HP_OFF);
+		regmap_read(es8326->regmap, ES8326_CSM_MUTE_STA, &reg);
+		if ((reg & 0xf0) != 0x40)
+			msleep(50);
+
+		regmap_write(es8326->regmap, ES8326_HP_CAL, 0xd4);
+		msleep(200);
+		regmap_write(es8326->regmap, ES8326_HP_CAL, 0x4d);
+		msleep(200);
+		regmap_write(es8326->regmap, ES8326_HP_CAL, ES8326_HP_OFF);
+		regmap_read(es8326->regmap, ES8326_HPL_OFFSET_INI, &offset_l);
+		regmap_read(es8326->regmap, ES8326_HPR_OFFSET_INI, &offset_r);
+		regmap_write(es8326->regmap, ES8326_HP_OFFSET_CAL, 0x8c);
+		regmap_write(es8326->regmap, ES8326_HPL_OFFSET_INI, offset_l);
+		regmap_write(es8326->regmap, ES8326_HPR_OFFSET_INI, offset_r);
+		regmap_write(es8326->regmap, ES8326_CLK_INV, 0x00);
+
+		es8326->calibrated = true;
+	}
+
+	return 0;
+}
+
 static int es8326_resume(struct snd_soc_component *component)
 {
 	struct es8326_priv *es8326 = snd_soc_component_get_drvdata(component);
@@ -673,7 +725,8 @@ static int es8326_resume(struct snd_soc_component *component)
 	regmap_write(es8326->regmap, ES8326_CLK_VMIDS1, 0xc4);
 	regmap_write(es8326->regmap, ES8326_CLK_VMIDS2, 0x81);
 	regmap_write(es8326->regmap, ES8326_CLK_CAL_TIME, 0x00);
-
+	/* calibrate for B version */
+	es8326_calibrate(component);
 	/* turn off headphone out */
 	regmap_write(es8326->regmap, ES8326_HP_CAL, 0x00);
 	/* set ADC and DAC in low power mode */
-- 
2.34.1


  parent reply	other threads:[~2023-07-14  3:28 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-14  3:24 [PATCH v1 1/5] ASoC: codecs: ES8326: Add es8326_mute function Zhu Ning
2023-07-14  3:24 ` [PATCH v1 2/5] ASoC: codecs: ES8326: Change Hp_detect and volatile reg function Zhu Ning
2023-07-14 13:19   ` Mark Brown
2023-07-14 16:06   ` Mark Brown
2023-07-14  3:24 ` [PATCH v1 3/5] ASoC: codecs: ES8326: Fix power-up sequence Zhu Ning
2023-07-14  3:24 ` Zhu Ning [this message]
2023-07-14  3:24 ` [PATCH v1 5/5] ASoC: codecs: ES8326: Update jact detection function Zhu Ning
2023-07-14 21:38 ` [PATCH v1 1/5] ASoC: codecs: ES8326: Add es8326_mute function Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230714032453.3334-4-zhuning0077@gmail.com \
    --to=zhuning0077@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=amadeuszx.slawinski@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.com \
    --cc=yangxiaohua@everest-semi.com \
    --cc=zhuning@everest-semi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.