From: George Stark <gnstark@sberdevices.ru>
To: <jic23@kernel.org>, <lars@metafoo.de>,
<neil.armstrong@linaro.org>, <khilman@baylibre.com>,
<jbrunet@baylibre.com>, <martin.blumenstingl@googlemail.com>,
<andriy.shevchenko@linux.intel.com>, <nuno.sa@analog.com>,
<gnstark@sberdevices.ru>
Cc: <linux-iio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-amlogic@lists.infradead.org>, <kernel@sberdevices.ru>
Subject: [PATCH v1 1/3] iio: adc: meson: init channels 0,1 input muxes
Date: Sat, 15 Jul 2023 14:05:58 +0300 [thread overview]
Message-ID: <20230715110654.6035-2-gnstark@sberdevices.ru> (raw)
In-Reply-To: <20230715110654.6035-1-gnstark@sberdevices.ru>
Set up input channels 0,1 muxes in the same way as for the channels 2-7
later in the code.
Signed-off-by: George Stark <gnstark@sberdevices.ru>
---
drivers/iio/adc/meson_saradc.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2411cc864ccd..524e5569381e 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -899,6 +899,22 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK,
regval);
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW);
+
/*
* set up the input channel muxes in MESON_SAR_ADC_AUX_SW
* (2 = SAR_ADC_CH2, 3 = SAR_ADC_CH3, ...) and enable
--
2.38.4
WARNING: multiple messages have this Message-ID (diff)
From: George Stark <gnstark@sberdevices.ru>
To: <jic23@kernel.org>, <lars@metafoo.de>,
<neil.armstrong@linaro.org>, <khilman@baylibre.com>,
<jbrunet@baylibre.com>, <martin.blumenstingl@googlemail.com>,
<andriy.shevchenko@linux.intel.com>, <nuno.sa@analog.com>,
<gnstark@sberdevices.ru>
Cc: <linux-iio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-amlogic@lists.infradead.org>, <kernel@sberdevices.ru>
Subject: [PATCH v1 1/3] iio: adc: meson: init channels 0,1 input muxes
Date: Sat, 15 Jul 2023 14:05:58 +0300 [thread overview]
Message-ID: <20230715110654.6035-2-gnstark@sberdevices.ru> (raw)
In-Reply-To: <20230715110654.6035-1-gnstark@sberdevices.ru>
Set up input channels 0,1 muxes in the same way as for the channels 2-7
later in the code.
Signed-off-by: George Stark <gnstark@sberdevices.ru>
---
drivers/iio/adc/meson_saradc.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2411cc864ccd..524e5569381e 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -899,6 +899,22 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK,
regval);
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW);
+
/*
* set up the input channel muxes in MESON_SAR_ADC_AUX_SW
* (2 = SAR_ADC_CH2, 3 = SAR_ADC_CH3, ...) and enable
--
2.38.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: George Stark <gnstark@sberdevices.ru>
To: <jic23@kernel.org>, <lars@metafoo.de>,
<neil.armstrong@linaro.org>, <khilman@baylibre.com>,
<jbrunet@baylibre.com>, <martin.blumenstingl@googlemail.com>,
<andriy.shevchenko@linux.intel.com>, <nuno.sa@analog.com>,
<gnstark@sberdevices.ru>
Cc: <linux-iio@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-amlogic@lists.infradead.org>, <kernel@sberdevices.ru>
Subject: [PATCH v1 1/3] iio: adc: meson: init channels 0,1 input muxes
Date: Sat, 15 Jul 2023 14:05:58 +0300 [thread overview]
Message-ID: <20230715110654.6035-2-gnstark@sberdevices.ru> (raw)
In-Reply-To: <20230715110654.6035-1-gnstark@sberdevices.ru>
Set up input channels 0,1 muxes in the same way as for the channels 2-7
later in the code.
Signed-off-by: George Stark <gnstark@sberdevices.ru>
---
drivers/iio/adc/meson_saradc.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2411cc864ccd..524e5569381e 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -899,6 +899,22 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK,
regval);
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW);
+
/*
* set up the input channel muxes in MESON_SAR_ADC_AUX_SW
* (2 = SAR_ADC_CH2, 3 = SAR_ADC_CH3, ...) and enable
--
2.38.4
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: George Stark <gnstark@sberdevices.ru>
To: jic23@kernel.org, lars@metafoo.de, neil.armstrong@linaro.org,
khilman@baylibre.com, jbrunet@baylibre.com,
martin.blumenstingl@googlemail.com,
andriy.shevchenko@linux.intel.com, nuno.sa@analog.com,
gnstark@sberdevices.ru
Cc: linux-iio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
kernel@sberdevices.ru
Subject: [PATCH v1 1/3] iio: adc: meson: init channels 0,1 input muxes
Date: Sat, 15 Jul 2023 14:05:58 +0300 [thread overview]
Message-ID: <20230715110654.6035-2-gnstark@sberdevices.ru> (raw)
Message-ID: <20230715110558.f4R4uvyojcfay-6Irxr-LqWyOxfduHjOwQ-KZu018S8@z> (raw)
In-Reply-To: <20230715110654.6035-1-gnstark@sberdevices.ru>
Set up input channels 0,1 muxes in the same way as for the channels 2-7
later in the code.
Signed-off-by: George Stark <gnstark@sberdevices.ru>
---
drivers/iio/adc/meson_saradc.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2411cc864ccd..524e5569381e 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -899,6 +899,22 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK,
regval);
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW);
+
+ regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW,
+ MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW);
+
/*
* set up the input channel muxes in MESON_SAR_ADC_AUX_SW
* (2 = SAR_ADC_CH2, 3 = SAR_ADC_CH3, ...) and enable
--
2.38.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-07-15 11:07 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-15 11:05 [PATCH v1 0/3] iio: adc: meson: tune init sequence George Stark
2023-07-15 11:05 ` George Stark
2023-07-15 11:05 ` George Stark
2023-07-15 11:05 ` George Stark
2023-07-15 11:05 ` George Stark [this message]
2023-07-15 11:05 ` [PATCH v1 1/3] iio: adc: meson: init channels 0,1 input muxes George Stark
2023-07-15 11:05 ` George Stark
2023-07-15 11:05 ` George Stark
2023-07-16 20:24 ` [PATCH " Markus Elfring
2023-07-16 20:24 ` Markus Elfring
2023-07-15 11:05 ` [PATCH v1 2/3] iio: adc: meson: init internal continuous ring counter George Stark
2023-07-15 11:05 ` George Stark
2023-07-15 11:05 ` George Stark
2023-07-15 11:05 ` George Stark
2023-07-16 20:36 ` [PATCH " Markus Elfring
2023-07-16 20:36 ` Markus Elfring
2023-07-15 11:06 ` [PATCH v1 3/3] iio: adc: meson: init voltage control bits George Stark
2023-07-15 11:06 ` George Stark
2023-07-15 11:06 ` George Stark
2023-07-15 11:06 ` George Stark
2023-07-16 16:11 ` [PATCH v1 0/3] iio: adc: meson: tune init sequence Jonathan Cameron
2023-07-16 16:11 ` Jonathan Cameron
2023-07-16 16:11 ` Jonathan Cameron
2023-07-17 9:41 ` George Stark
2023-07-17 9:41 ` George Stark
2023-07-17 9:41 ` George Stark
2023-07-17 10:01 ` Andy Shevchenko
2023-07-17 10:01 ` Andy Shevchenko
2023-07-17 10:01 ` Andy Shevchenko
2023-07-18 9:41 ` Jonathan Cameron
2023-07-18 9:41 ` Jonathan Cameron
2023-07-18 9:41 ` Jonathan Cameron
2023-07-22 16:59 ` Jonathan Cameron
2023-07-22 16:59 ` Jonathan Cameron
2023-07-22 16:59 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230715110654.6035-2-gnstark@sberdevices.ru \
--to=gnstark@sberdevices.ru \
--cc=andriy.shevchenko@linux.intel.com \
--cc=jbrunet@baylibre.com \
--cc=jic23@kernel.org \
--cc=kernel@sberdevices.ru \
--cc=khilman@baylibre.com \
--cc=lars@metafoo.de \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.