All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhu Ning <zhuning0077@gmail.com>
To: alsa-devel@alsa-project.org, broonie@kernel.org
Cc: pierre-louis.bossart@linux.intel.com, tiwai@suse.com,
	amadeuszx.slawinski@linux.intel.com,
	yangxiaohua@everest-semi.com, zhuning@everest-semi.com,
	Zhu Ning <zhuning0077@gmail.com>
Subject: [PATCH v2 1/5] ASoC: codecs: ES8326: Change Hp_detect register names
Date: Mon, 17 Jul 2023 11:32:19 +0800	[thread overview]
Message-ID: <20230717033223.42506-1-zhuning0077@gmail.com> (raw)

The old register naming method is confusing. The reg 0x57 decides
the default headset hardware connection type, and the reg 0xfb is
the headset detection status register, which changes during headset
insertion. Change the name to ES8326_HPDET_TYPE and ES8326_HPDET_STA.

Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
---
 sound/soc/codecs/es8326.c | 10 +++++-----
 sound/soc/codecs/es8326.h | 13 ++++++++-----
 2 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c
index 4399ba36aee2..e953c0157ba0 100644
--- a/sound/soc/codecs/es8326.c
+++ b/sound/soc/codecs/es8326.c
@@ -159,7 +159,7 @@ static const struct snd_soc_dapm_route es8326_dapm_routes[] = {
 };
 
 static const struct regmap_range es8326_volatile_ranges[] = {
-	regmap_reg_range(ES8326_HP_DETECT, ES8326_HP_DETECT),
+	regmap_reg_range(ES8326_HPDET_STA, ES8326_HPDET_STA),
 };
 
 static const struct regmap_access_table es8326_volatile_table = {
@@ -519,7 +519,7 @@ static void es8326_jack_button_handler(struct work_struct *work)
 		return;
 
 	mutex_lock(&es8326->lock);
-	iface = snd_soc_component_read(comp, ES8326_HP_DETECT);
+	iface = snd_soc_component_read(comp, ES8326_HPDET_STA);
 	switch (iface) {
 	case 0x93:
 		/* pause button detected */
@@ -578,7 +578,7 @@ static void es8326_jack_detect_handler(struct work_struct *work)
 	unsigned int iface;
 
 	mutex_lock(&es8326->lock);
-	iface = snd_soc_component_read(comp, ES8326_HP_DETECT);
+	iface = snd_soc_component_read(comp, ES8326_HPDET_STA);
 	dev_dbg(comp->dev, "gpio flag %#04x", iface);
 	if ((iface & ES8326_HPINSERT_FLAG) == 0) {
 		/* Jack unplugged or spurious IRQ */
@@ -651,7 +651,7 @@ static int es8326_resume(struct snd_soc_component *component)
 	regmap_write(es8326->regmap, ES8326_ADC1_SRC, es8326->mic1_src);
 	regmap_write(es8326->regmap, ES8326_ADC2_SRC, es8326->mic2_src);
 	regmap_write(es8326->regmap, ES8326_HPJACK_TIMER, 0x88);
-	regmap_write(es8326->regmap, ES8326_HP_DET,
+	regmap_write(es8326->regmap, ES8326_HPDET_TYPE,
 		     ES8326_HP_DET_SRC_PIN9 | es8326->jack_pol);
 	regmap_write(es8326->regmap, ES8326_INT_SOURCE, es8326->interrupt_src);
 	regmap_write(es8326->regmap, ES8326_INTOUT_IO, es8326->interrupt_clk);
@@ -743,7 +743,7 @@ static void es8326_enable_jack_detect(struct snd_soc_component *component,
 
 	mutex_lock(&es8326->lock);
 	if (es8326->jd_inverted)
-		snd_soc_component_update_bits(component, ES8326_HP_DET,
+		snd_soc_component_update_bits(component, ES8326_HPDET_TYPE,
 					      ES8326_HP_DET_JACK_POL, ~es8326->jack_pol);
 	es8326->jack = jack;
 
diff --git a/sound/soc/codecs/es8326.h b/sound/soc/codecs/es8326.h
index 3f8f7da58062..cd04d11a88d9 100644
--- a/sound/soc/codecs/es8326.h
+++ b/sound/soc/codecs/es8326.h
@@ -73,15 +73,19 @@
 #define ES8326_DRC_RECOVERY	0x53
 #define ES8326_DRC_WINSIZE	0x54
 #define ES8326_HPJACK_TIMER	0x56
-#define ES8326_HP_DET		0x57
+#define ES8326_HPDET_TYPE	0x57
 #define ES8326_INT_SOURCE	0x58
 #define ES8326_INTOUT_IO	0x59
 #define ES8326_SDINOUT1_IO	0x5A
 #define ES8326_SDINOUT23_IO	0x5B
 #define ES8326_JACK_PULSE	0x5C
 
+#define ES8326_HP_MISC		0xF7
+#define ES8326_CTIA_OMTP_STA	0xF8
 #define ES8326_PULLUP_CTL	0xF9
-#define ES8326_HP_DETECT	0xFB
+#define ES8326_CSM_I2C_STA	0xFA
+#define ES8326_HPDET_STA	0xFB
+#define ES8326_CSM_MUTE_STA	0xFC
 #define ES8326_CHIP_ID1		0xFD
 #define ES8326_CHIP_ID2		0xFE
 #define ES8326_CHIP_VERSION	0xFF
@@ -146,7 +150,7 @@
 #define ES8326_ADC3_SHIFT 0
 #define ES8326_ADC4_SHIFT 3
 
-/* ES8326_HP_DET */
+/* ES8326_HPDET_TYPE */
 #define ES8326_HP_DET_SRC_PIN27 (1 << 5)
 #define ES8326_HP_DET_SRC_PIN9 (1 << 4)
 #define ES8326_HP_DET_JACK_POL (1 << 3)
@@ -174,7 +178,7 @@
 #define ES8326_SDINOUT2_SHIFT 4
 #define ES8326_SDINOUT3_SHIFT 0
 
-/* ES8326_HP_DETECT */
+/* ES8326_HPDET_STA */
 #define ES8326_HPINSERT_FLAG (1 << 1)
 #define ES8326_HPBUTTON_FLAG (1 << 0)
 
@@ -182,4 +186,3 @@
 #define ES8326_VERSION_B (1 << 0)
 
 #endif
-
-- 
2.34.1


             reply	other threads:[~2023-07-17  3:36 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-17  3:32 Zhu Ning [this message]
2023-07-17  3:32 ` [PATCH v2 2/5] ASoC: codecs: ES8326: Change Volatile Reg function Zhu Ning
2023-07-17  3:32 ` [PATCH v2 3/5] ASoC: codecs: ES8326: Fix power-up sequence Zhu Ning
2023-07-17  3:32 ` [PATCH v2 4/5] ASOC: codecs: ES8326: Add calibration support for version_b Zhu Ning
2023-07-17  3:32 ` [PATCH v2 5/5] ASoC: codecs: ES8326: Update jact detection function Zhu Ning
2023-07-25 16:49 ` [PATCH v2 1/5] ASoC: codecs: ES8326: Change Hp_detect register names Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230717033223.42506-1-zhuning0077@gmail.com \
    --to=zhuning0077@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=amadeuszx.slawinski@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.com \
    --cc=yangxiaohua@everest-semi.com \
    --cc=zhuning@everest-semi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.