[PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1

From: John Watts <contact@jookia.org>
To: linux-sunxi@lists.linux.dev
Cc: Wolfgang Grandegger <wg@grandegger.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	linux-can@vger.kernel.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org,
	John Watts <contact@jookia.org>
Subject: [PATCH v2 4/4] can: sun4i_can: Add support for the Allwinner D1
Date: Sat, 22 Jul 2023 08:15:53 +1000	[thread overview]
Message-ID: <20230721221552.1973203-6-contact@jookia.org> (raw)
In-Reply-To: <20230721221552.1973203-2-contact@jookia.org>

The controllers present in the D1 are extremely similar to the R40
and require the same reset quirks, but An extra quirk is needed to support
receiving packets.

Signed-off-by: John Watts <contact@jookia.org>
---
 drivers/net/can/Kconfig     |  4 ++--
 drivers/net/can/sun4i_can.c | 12 +++++++++++-
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index a5c5036dfb94..e626de33e735 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -185,10 +185,10 @@ config CAN_SLCAN
 
 config CAN_SUN4I
 	tristate "Allwinner A10 CAN controller"
-	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+	depends on MACH_SUN4I || MACH_SUN7I || RISCV || COMPILE_TEST
 	help
 	  Say Y here if you want to use CAN controller found on Allwinner
-	  A10/A20 SoCs.
+	  A10/A20/D1 SoCs.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called sun4i_can.
diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index 1f90fe6dbb8b..c508a328e38d 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -91,6 +91,8 @@
 #define SUN4I_REG_BUF12_ADDR	0x0070	/* CAN Tx/Rx Buffer 12 */
 #define SUN4I_REG_ACPC_ADDR	0x0040	/* CAN Acceptance Code 0 */
 #define SUN4I_REG_ACPM_ADDR	0x0044	/* CAN Acceptance Mask 0 */
+#define SUN4I_REG_ACPC_ADDR_D1	0x0028	/* CAN Acceptance Code 0 on the D1 */
+#define SUN4I_REG_ACPM_ADDR_D1	0x002C	/* CAN Acceptance Mask 0 on the D1 */
 #define SUN4I_REG_RBUF_RBACK_START_ADDR	0x0180	/* CAN transmit buffer start */
 #define SUN4I_REG_RBUF_RBACK_END_ADDR	0x01b0	/* CAN transmit buffer end */
 
@@ -779,6 +781,11 @@ static const struct sun4ican_quirks sun4ican_quirks_r40 = {
 	.acp_offset = 0,
 };
 
+static const struct sun4ican_quirks sun4ican_quirks_d1 = {
+	.has_reset = true,
+	.acp_offset = (SUN4I_REG_ACPC_ADDR_D1 - SUN4I_REG_ACPC_ADDR),
+};
+
 static const struct of_device_id sun4ican_of_match[] = {
 	{
 		.compatible = "allwinner,sun4i-a10-can",
@@ -789,6 +796,9 @@ static const struct of_device_id sun4ican_of_match[] = {
 	}, {
 		.compatible = "allwinner,sun8i-r40-can",
 		.data = &sun4ican_quirks_r40
+	}, {
+		.compatible = "allwinner,sun20i-d1-can",
+		.data = &sun4ican_quirks_d1
 	}, {
 		/* sentinel */
 	},
@@ -913,4 +923,4 @@ module_platform_driver(sun4i_can_driver);
 MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
 MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");
+MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20/D1)");
-- 
2.41.0

