All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrick Rohr <prohr@google.com>
To: "David S . Miller" <davem@davemloft.net>
Cc: "Linux Network Development Mailing List" <netdev@vger.kernel.org>,
	"Patrick Rohr" <prohr@google.com>,
	"Maciej Żenczykowski" <maze@google.com>,
	"Lorenzo Colitti" <lorenzo@google.com>,
	"David Ahern" <dsahern@kernel.org>
Subject: [net-next v2] net: change accept_ra_min_rtr_lft to affect all RA lifetimes
Date: Wed, 26 Jul 2023 16:07:01 -0700	[thread overview]
Message-ID: <20230726230701.919212-1-prohr@google.com> (raw)

accept_ra_min_rtr_lft only considered the lifetime of the default route
and discarded entire RAs accordingly.

This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and
applies the value to individual RA sections; in particular, router
lifetime, PIO preferred lifetime, and RIO lifetime. If any of those
lifetimes are lower than the configured value, the specific RA section
is ignored.

In order for the sysctl to be useful to Android, it should really apply
to all lifetimes in the RA, since that is what determines the minimum
frequency at which RAs must be processed by the kernel. Android uses
hardware offloads to drop RAs for a fraction of the minimum of all
lifetimes present in the RA (some networks have very frequent RAs (5s)
with high lifetimes (2h)). Despite this, we have encountered networks
that set the router lifetime to 30s which results in very frequent CPU
wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the
WiFi firmware) entirely on such networks, it seems better to ignore the
misconfigured routers while still processing RAs from other IPv6 routers
on the same network (i.e. to support IoT applications).

The previous implementation dropped the entire RA based on router
lifetime. This turned out to be hard to expand to the other lifetimes
present in the RA in a consistent manner; dropping the entire RA based
on RIO/PIO lifetimes would essentially require parsing the whole thing
twice.

Fixes: 1671bcfd76fd ("net: add sysctl accept_ra_min_rtr_lft")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Patrick Rohr <prohr@google.com>
---
 Documentation/networking/ip-sysctl.rst |  8 ++++----
 include/linux/ipv6.h                   |  2 +-
 include/uapi/linux/ipv6.h              |  2 +-
 net/ipv6/addrconf.c                    | 14 ++++++++-----
 net/ipv6/ndisc.c                       | 27 +++++++++++---------------
 5 files changed, 26 insertions(+), 27 deletions(-)

diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 37603ad6126b..a66054d0763a 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -2288,11 +2288,11 @@ accept_ra_min_hop_limit - INTEGER
 
 	Default: 1
 
-accept_ra_min_rtr_lft - INTEGER
-	Minimum acceptable router lifetime in Router Advertisement.
+accept_ra_min_lft - INTEGER
+	Minimum acceptable lifetime value in Router Advertisement.
 
-	RAs with a router lifetime less than this value shall be
-	ignored. RAs with a router lifetime of 0 are unaffected.
+	RA sections with a lifetime less than this value shall be
+	ignored. Zero lifetimes stay unaffected.
 
 	Default: 0
 
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 0295b47c10a3..5883551b1ee8 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -33,7 +33,7 @@ struct ipv6_devconf {
 	__s32		accept_ra_defrtr;
 	__u32		ra_defrtr_metric;
 	__s32		accept_ra_min_hop_limit;
-	__s32		accept_ra_min_rtr_lft;
+	__s32		accept_ra_min_lft;
 	__s32		accept_ra_pinfo;
 	__s32		ignore_routes_with_linkdown;
 #ifdef CONFIG_IPV6_ROUTER_PREF
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
index 8b6bcbf6ed4a..cf592d7b630f 100644
--- a/include/uapi/linux/ipv6.h
+++ b/include/uapi/linux/ipv6.h
@@ -198,7 +198,7 @@ enum {
 	DEVCONF_IOAM6_ID_WIDE,
 	DEVCONF_NDISC_EVICT_NOCARRIER,
 	DEVCONF_ACCEPT_UNTRACKED_NA,
-	DEVCONF_ACCEPT_RA_MIN_RTR_LFT,
+	DEVCONF_ACCEPT_RA_MIN_LFT,
 	DEVCONF_MAX
 };
 
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 19eb4b3d26ea..7f7d2b677711 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -202,7 +202,7 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = {
 	.ra_defrtr_metric	= IP6_RT_PRIO_USER,
 	.accept_ra_from_local	= 0,
 	.accept_ra_min_hop_limit= 1,
-	.accept_ra_min_rtr_lft	= 0,
+	.accept_ra_min_lft	= 0,
 	.accept_ra_pinfo	= 1,
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	.accept_ra_rtr_pref	= 1,
@@ -263,7 +263,7 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
 	.ra_defrtr_metric	= IP6_RT_PRIO_USER,
 	.accept_ra_from_local	= 0,
 	.accept_ra_min_hop_limit= 1,
-	.accept_ra_min_rtr_lft	= 0,
+	.accept_ra_min_lft	= 0,
 	.accept_ra_pinfo	= 1,
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	.accept_ra_rtr_pref	= 1,
@@ -2727,6 +2727,10 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len, bool sllao)
 		return;
 	}
 
+	if (valid_lft != 0 && valid_lft < in6_dev->cnf.accept_ra_min_lft) {
+		return;
+	}
+
 	/*
 	 *	Two things going on here:
 	 *	1) Add routes for on-link prefixes
@@ -5598,7 +5602,7 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
 	array[DEVCONF_IOAM6_ID_WIDE] = cnf->ioam6_id_wide;
 	array[DEVCONF_NDISC_EVICT_NOCARRIER] = cnf->ndisc_evict_nocarrier;
 	array[DEVCONF_ACCEPT_UNTRACKED_NA] = cnf->accept_untracked_na;
-	array[DEVCONF_ACCEPT_RA_MIN_RTR_LFT] = cnf->accept_ra_min_rtr_lft;
+	array[DEVCONF_ACCEPT_RA_MIN_LFT] = cnf->accept_ra_min_lft;
 }
 
 static inline size_t inet6_ifla6_size(void)
@@ -6793,8 +6797,8 @@ static const struct ctl_table addrconf_sysctl[] = {
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.procname	= "accept_ra_min_rtr_lft",
-		.data		= &ipv6_devconf.accept_ra_min_rtr_lft,
+		.procname	= "accept_ra_min_lft",
+		.data		= &ipv6_devconf.accept_ra_min_lft,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 29ddad1c1a2f..eeb60888187f 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1280,8 +1280,6 @@ static enum skb_drop_reason ndisc_router_discovery(struct sk_buff *skb)
 	if (!ndisc_parse_options(skb->dev, opt, optlen, &ndopts))
 		return SKB_DROP_REASON_IPV6_NDISC_BAD_OPTIONS;
 
-	lifetime = ntohs(ra_msg->icmph.icmp6_rt_lifetime);
-
 	if (!ipv6_accept_ra(in6_dev)) {
 		ND_PRINTK(2, info,
 			  "RA: %s, did not accept ra for dev: %s\n",
@@ -1289,13 +1287,6 @@ static enum skb_drop_reason ndisc_router_discovery(struct sk_buff *skb)
 		goto skip_linkparms;
 	}
 
-	if (lifetime != 0 && lifetime < in6_dev->cnf.accept_ra_min_rtr_lft) {
-		ND_PRINTK(2, info,
-			  "RA: router lifetime (%ds) is too short: %s\n",
-			  lifetime, skb->dev->name);
-		goto skip_linkparms;
-	}
-
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	/* skip link-specific parameters from interior routers */
 	if (skb->ndisc_nodetype == NDISC_NODETYPE_NODEFAULT) {
@@ -1336,6 +1327,14 @@ static enum skb_drop_reason ndisc_router_discovery(struct sk_buff *skb)
 		goto skip_defrtr;
 	}
 
+	lifetime = ntohs(ra_msg->icmph.icmp6_rt_lifetime);
+	if (lifetime != 0 && lifetime < in6_dev->cnf.accept_ra_min_lft) {
+		ND_PRINTK(2, info,
+			  "RA: router lifetime (%ds) is too short: %s\n",
+			  lifetime, skb->dev->name);
+		goto skip_defrtr;
+	}
+
 	/* Do not accept RA with source-addr found on local machine unless
 	 * accept_ra_from_local is set to true.
 	 */
@@ -1499,13 +1498,6 @@ static enum skb_drop_reason ndisc_router_discovery(struct sk_buff *skb)
 		goto out;
 	}
 
-	if (lifetime != 0 && lifetime < in6_dev->cnf.accept_ra_min_rtr_lft) {
-		ND_PRINTK(2, info,
-			  "RA: router lifetime (%ds) is too short: %s\n",
-			  lifetime, skb->dev->name);
-		goto out;
-	}
-
 #ifdef CONFIG_IPV6_ROUTE_INFO
 	if (!in6_dev->cnf.accept_ra_from_local &&
 	    ipv6_chk_addr(dev_net(in6_dev->dev), &ipv6_hdr(skb)->saddr,
@@ -1530,6 +1522,9 @@ static enum skb_drop_reason ndisc_router_discovery(struct sk_buff *skb)
 			if (ri->prefix_len == 0 &&
 			    !in6_dev->cnf.accept_ra_defrtr)
 				continue;
+			if (ri->lifetime != 0 &&
+			    ntohl(ri->lifetime) < in6_dev->cnf.accept_ra_min_lft)
+				continue;
 			if (ri->prefix_len < in6_dev->cnf.accept_ra_rt_info_min_plen)
 				continue;
 			if (ri->prefix_len > in6_dev->cnf.accept_ra_rt_info_max_plen)
-- 
2.41.0.487.g6d72f3e995-goog


             reply	other threads:[~2023-07-26 23:07 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-26 23:07 Patrick Rohr [this message]
2023-07-27 12:23 ` [net-next v2] net: change accept_ra_min_rtr_lft to affect all RA lifetimes Simon Horman
2023-07-27 12:38   ` Maciej Żenczykowski
2023-07-27 12:45     ` Simon Horman
2023-07-27 12:51 ` Maciej Żenczykowski
2023-07-27 15:24 ` David Ahern
2023-07-28 20:32 ` Jakub Kicinski
2023-07-28 20:40 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230726230701.919212-1-prohr@google.com \
    --to=prohr@google.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=lorenzo@google.com \
    --cc=maze@google.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.