From: Keguang Zhang <keguang.zhang@gmail.com>
To: linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Keguang Zhang <keguang.zhang@gmail.com>
Subject: [PATCH 15/17] MIPS: loongson32: Remove all the obsolete code of platform device
Date: Sat, 29 Jul 2023 21:43:16 +0800 [thread overview]
Message-ID: <20230729134318.1694467-16-keguang.zhang@gmail.com> (raw)
In-Reply-To: <20230729134318.1694467-1-keguang.zhang@gmail.com>
All platform devices of Loongson-1 was converted to devicetree.
Therefore, removes all the obsolete platform device related code,
header files and Kconfig options.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
---
arch/mips/include/asm/mach-loongson32/dma.h | 21 ---
arch/mips/include/asm/mach-loongson32/irq.h | 107 ---------------
.../include/asm/mach-loongson32/loongson1.h | 50 -------
arch/mips/include/asm/mach-loongson32/nand.h | 26 ----
.../include/asm/mach-loongson32/platform.h | 26 ----
.../include/asm/mach-loongson32/regs-mux.h | 124 ------------------
arch/mips/loongson32/Kconfig | 8 --
arch/mips/loongson32/Makefile | 13 --
arch/mips/loongson32/common/Makefile | 6 -
arch/mips/loongson32/common/platform.c | 17 ---
arch/mips/loongson32/ls1b/Makefile | 6 -
arch/mips/loongson32/ls1b/board.c | 24 ----
arch/mips/loongson32/ls1c/Makefile | 6 -
arch/mips/loongson32/ls1c/board.c | 17 ---
14 files changed, 451 deletions(-)
delete mode 100644 arch/mips/include/asm/mach-loongson32/dma.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/irq.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/loongson1.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/nand.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/platform.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/regs-mux.h
delete mode 100644 arch/mips/loongson32/common/Makefile
delete mode 100644 arch/mips/loongson32/common/platform.c
delete mode 100644 arch/mips/loongson32/ls1b/Makefile
delete mode 100644 arch/mips/loongson32/ls1b/board.c
delete mode 100644 arch/mips/loongson32/ls1c/Makefile
delete mode 100644 arch/mips/loongson32/ls1c/board.c
diff --git a/arch/mips/include/asm/mach-loongson32/dma.h b/arch/mips/include/asm/mach-loongson32/dma.h
deleted file mode 100644
index e917b3ccb2c2..000000000000
--- a/arch/mips/include/asm/mach-loongson32/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2015 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 NAND platform support.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_DMA_H
-#define __ASM_MACH_LOONGSON32_DMA_H
-
-#define LS1X_DMA_CHANNEL0 0
-#define LS1X_DMA_CHANNEL1 1
-#define LS1X_DMA_CHANNEL2 2
-
-struct plat_ls1x_dma {
- int nr_channels;
-};
-
-extern struct plat_ls1x_dma ls1b_dma_pdata;
-
-#endif /* __ASM_MACH_LOONGSON32_DMA_H */
diff --git a/arch/mips/include/asm/mach-loongson32/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h
deleted file mode 100644
index 6115f025ba21..000000000000
--- a/arch/mips/include/asm/mach-loongson32/irq.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * IRQ mappings for Loongson 1
- */
-
-#ifndef __ASM_MACH_LOONGSON32_IRQ_H
-#define __ASM_MACH_LOONGSON32_IRQ_H
-
-/*
- * CPU core Interrupt Numbers
- */
-#define MIPS_CPU_IRQ_BASE 0
-#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
-
-#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
-#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
-#define INT0_IRQ MIPS_CPU_IRQ(2)
-#define INT1_IRQ MIPS_CPU_IRQ(3)
-#define INT2_IRQ MIPS_CPU_IRQ(4)
-#define INT3_IRQ MIPS_CPU_IRQ(5)
-#define INT4_IRQ MIPS_CPU_IRQ(6)
-#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
-
-#define MIPS_CPU_IRQS (MIPS_CPU_IRQ(7) + 1 - MIPS_CPU_IRQ_BASE)
-
-/*
- * INT0~3 Interrupt Numbers
- */
-#define LS1X_IRQ_BASE MIPS_CPU_IRQS
-#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
-
-#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
-#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
-#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_UART1_IRQ LS1X_IRQ(0, 4)
-#define LS1X_UART2_IRQ LS1X_IRQ(0, 5)
-#endif
-#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
-#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
-#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
-#define LS1X_SPI1_IRQ LS1X_IRQ(0, 9)
-#define LS1X_AC97_IRQ LS1X_IRQ(0, 10)
-#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
-#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
-#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
-#if defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_NAND_IRQ LS1X_IRQ(0, 16)
-#endif
-#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
-#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
-#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
-#define LS1X_PWM3_IRQ LS1X_IRQ(0, 20)
-#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
-#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
-#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
-#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
-#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
-#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
-#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
-#define LS1X_UART4_IRQ LS1X_IRQ(0, 29)
-#define LS1X_UART5_IRQ LS1X_IRQ(0, 30)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_UART3_IRQ LS1X_IRQ(0, 29)
-#define LS1X_ADC_IRQ LS1X_IRQ(0, 30)
-#define LS1X_SDIO_IRQ LS1X_IRQ(0, 31)
-#endif
-
-#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
-#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
-#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_OTG_IRQ LS1X_IRQ(1, 2)
-#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 3)
-#define LS1X_CAM_IRQ LS1X_IRQ(1, 4)
-#define LS1X_UART4_IRQ LS1X_IRQ(1, 5)
-#define LS1X_UART5_IRQ LS1X_IRQ(1, 6)
-#define LS1X_UART6_IRQ LS1X_IRQ(1, 7)
-#define LS1X_UART7_IRQ LS1X_IRQ(1, 8)
-#define LS1X_UART8_IRQ LS1X_IRQ(1, 9)
-#define LS1X_UART9_IRQ LS1X_IRQ(1, 13)
-#define LS1X_UART10_IRQ LS1X_IRQ(1, 14)
-#define LS1X_UART11_IRQ LS1X_IRQ(1, 15)
-#define LS1X_I2C0_IRQ LS1X_IRQ(1, 17)
-#define LS1X_I2C1_IRQ LS1X_IRQ(1, 18)
-#define LS1X_I2C2_IRQ LS1X_IRQ(1, 19)
-#endif
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define INTN 4
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define INTN 5
-#endif
-
-#define LS1X_IRQS (LS1X_IRQ(INTN, 31) + 1 - LS1X_IRQ_BASE)
-
-#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
-
-#endif /* __ASM_MACH_LOONGSON32_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
deleted file mode 100644
index 84f45461c832..000000000000
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Register mappings for Loongson 1
- */
-
-#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
-#define __ASM_MACH_LOONGSON32_LOONGSON1_H
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define DEFAULT_MEMSIZE 64 /* If no memsize provided */
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define DEFAULT_MEMSIZE 32
-#endif
-
-/* Loongson 1 Register Bases */
-#define LS1X_MUX_BASE 0x1fd00420
-#define LS1X_INTC_BASE 0x1fd01040
-#define LS1X_GPIO0_BASE 0x1fd010c0
-#define LS1X_GPIO1_BASE 0x1fd010c4
-#define LS1X_DMAC_BASE 0x1fd01160
-#define LS1X_CBUS_BASE 0x1fd011c0
-#define LS1X_EHCI_BASE 0x1fe00000
-#define LS1X_OHCI_BASE 0x1fe08000
-#define LS1X_GMAC0_BASE 0x1fe10000
-#define LS1X_GMAC1_BASE 0x1fe20000
-
-#define LS1X_UART0_BASE 0x1fe40000
-#define LS1X_UART1_BASE 0x1fe44000
-#define LS1X_UART2_BASE 0x1fe48000
-#define LS1X_UART3_BASE 0x1fe4c000
-#define LS1X_CAN0_BASE 0x1fe50000
-#define LS1X_CAN1_BASE 0x1fe54000
-#define LS1X_I2C0_BASE 0x1fe58000
-#define LS1X_I2C1_BASE 0x1fe68000
-#define LS1X_I2C2_BASE 0x1fe70000
-#define LS1X_PWM0_BASE 0x1fe5c000
-#define LS1X_PWM1_BASE 0x1fe5c010
-#define LS1X_PWM2_BASE 0x1fe5c020
-#define LS1X_PWM3_BASE 0x1fe5c030
-#define LS1X_WDT_BASE 0x1fe5c060
-#define LS1X_RTC_BASE 0x1fe64000
-#define LS1X_AC97_BASE 0x1fe74000
-#define LS1X_NAND_BASE 0x1fe78000
-#define LS1X_CLK_BASE 0x1fe78030
-
-#include <regs-mux.h>
-
-#endif /* __ASM_MACH_LOONGSON32_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson32/nand.h b/arch/mips/include/asm/mach-loongson32/nand.h
deleted file mode 100644
index aaf5ed19d78d..000000000000
--- a/arch/mips/include/asm/mach-loongson32/nand.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2015 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 NAND platform support.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_NAND_H
-#define __ASM_MACH_LOONGSON32_NAND_H
-
-#include <linux/dmaengine.h>
-#include <linux/mtd/partitions.h>
-
-struct plat_ls1x_nand {
- struct mtd_partition *parts;
- unsigned int nr_parts;
-
- int hold_cycle;
- int wait_cycle;
-};
-
-extern struct plat_ls1x_nand ls1b_nand_pdata;
-
-bool ls1x_dma_filter_fn(struct dma_chan *chan, void *param);
-
-#endif /* __ASM_MACH_LOONGSON32_NAND_H */
diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
deleted file mode 100644
index 2cdcfb5f6012..000000000000
--- a/arch/mips/include/asm/mach-loongson32/platform.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#ifndef __ASM_MACH_LOONGSON32_PLATFORM_H
-#define __ASM_MACH_LOONGSON32_PLATFORM_H
-
-#include <linux/platform_device.h>
-
-#include <dma.h>
-#include <nand.h>
-
-extern struct platform_device ls1x_uart_pdev;
-extern struct platform_device ls1x_eth0_pdev;
-extern struct platform_device ls1x_eth1_pdev;
-extern struct platform_device ls1x_ehci_pdev;
-extern struct platform_device ls1x_gpio0_pdev;
-extern struct platform_device ls1x_gpio1_pdev;
-extern struct platform_device ls1x_rtc_pdev;
-extern struct platform_device ls1x_wdt_pdev;
-
-void __init ls1x_rtc_set_extclk(struct platform_device *pdev);
-void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
-
-#endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h
deleted file mode 100644
index 95788a4f03a0..000000000000
--- a/arch/mips/include/asm/mach-loongson32/regs-mux.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * Loongson 1 MUX Register Definitions.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_REGS_MUX_H
-#define __ASM_MACH_LOONGSON32_REGS_MUX_H
-
-#define LS1X_MUX_REG(x) \
- ((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
-
-#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
-#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-/* MUX CTRL0 Register Bits */
-#define UART0_USE_PWM23 BIT(28)
-#define UART0_USE_PWM01 BIT(27)
-#define UART1_USE_LCD0_5_6_11 BIT(26)
-#define I2C2_USE_CAN1 BIT(25)
-#define I2C1_USE_CAN0 BIT(24)
-#define NAND3_USE_UART5 BIT(23)
-#define NAND3_USE_UART4 BIT(22)
-#define NAND3_USE_UART1_DAT BIT(21)
-#define NAND3_USE_UART1_CTS BIT(20)
-#define NAND3_USE_PWM23 BIT(19)
-#define NAND3_USE_PWM01 BIT(18)
-#define NAND2_USE_UART5 BIT(17)
-#define NAND2_USE_UART4 BIT(16)
-#define NAND2_USE_UART1_DAT BIT(15)
-#define NAND2_USE_UART1_CTS BIT(14)
-#define NAND2_USE_PWM23 BIT(13)
-#define NAND2_USE_PWM01 BIT(12)
-#define NAND1_USE_UART5 BIT(11)
-#define NAND1_USE_UART4 BIT(10)
-#define NAND1_USE_UART1_DAT BIT(9)
-#define NAND1_USE_UART1_CTS BIT(8)
-#define NAND1_USE_PWM23 BIT(7)
-#define NAND1_USE_PWM01 BIT(6)
-#define GMAC1_USE_UART1 BIT(4)
-#define GMAC1_USE_UART0 BIT(3)
-#define LCD_USE_UART0_DAT BIT(2)
-#define LCD_USE_UART15 BIT(1)
-#define LCD_USE_UART0 BIT(0)
-
-/* MUX CTRL1 Register Bits */
-#define USB_RESET BIT(31)
-#define SPI1_CS_USE_PWM01 BIT(24)
-#define SPI1_USE_CAN BIT(23)
-#define DISABLE_DDR_CONFSPACE BIT(20)
-#define DDR32TO16EN BIT(16)
-#define GMAC1_SHUT BIT(13)
-#define GMAC0_SHUT BIT(12)
-#define USB_SHUT BIT(11)
-#define UART1_3_USE_CAN1 BIT(5)
-#define UART1_2_USE_CAN0 BIT(4)
-#define GMAC1_USE_TXCLK BIT(3)
-#define GMAC0_USE_TXCLK BIT(2)
-#define GMAC1_USE_PWM23 BIT(1)
-#define GMAC0_USE_PWM01 BIT(0)
-
-#elif defined(CONFIG_LOONGSON1_LS1C)
-
-/* SHUT_CTRL Register Bits */
-#define UART_SPLIT GENMASK(31, 30)
-#define OUTPUT_CLK GENMASK(29, 26)
-#define ADC_SHUT BIT(25)
-#define SDIO_SHUT BIT(24)
-#define DMA2_SHUT BIT(23)
-#define DMA1_SHUT BIT(22)
-#define DMA0_SHUT BIT(21)
-#define SPI1_SHUT BIT(20)
-#define SPI0_SHUT BIT(19)
-#define I2C2_SHUT BIT(18)
-#define I2C1_SHUT BIT(17)
-#define I2C0_SHUT BIT(16)
-#define AC97_SHUT BIT(15)
-#define I2S_SHUT BIT(14)
-#define UART3_SHUT BIT(13)
-#define UART2_SHUT BIT(12)
-#define UART1_SHUT BIT(11)
-#define UART0_SHUT BIT(10)
-#define CAN1_SHUT BIT(9)
-#define CAN0_SHUT BIT(8)
-#define ECC_SHUT BIT(7)
-#define GMAC_SHUT BIT(6)
-#define USBHOST_SHUT BIT(5)
-#define USBOTG_SHUT BIT(4)
-#define SDRAM_SHUT BIT(3)
-#define SRAM_SHUT BIT(2)
-#define CAM_SHUT BIT(1)
-#define LCD_SHUT BIT(0)
-
-#define UART_SPLIT_SHIFT 30
-#define OUTPUT_CLK_SHIFT 26
-
-/* MISC_CTRL Register Bits */
-#define USBHOST_RSTN BIT(31)
-#define PHY_INTF_SELI GENMASK(30, 28)
-#define AC97_EN BIT(25)
-#define SDIO_DMA_EN GENMASK(24, 23)
-#define ADC_DMA_EN BIT(22)
-#define SDIO_USE_SPI1 BIT(17)
-#define SDIO_USE_SPI0 BIT(16)
-#define SRAM_CTRL GENMASK(15, 0)
-
-#define PHY_INTF_SELI_SHIFT 28
-#define SDIO_DMA_EN_SHIFT 23
-#define SRAM_CTRL_SHIFT 0
-
-#define LS1X_CBUS_REG(n, x) \
- ((void __iomem *)KSEG1ADDR(LS1X_CBUS_BASE + (n * 0x04) + (x)))
-
-#define LS1X_CBUS_FIRST(n) LS1X_CBUS_REG(n, 0x00)
-#define LS1X_CBUS_SECOND(n) LS1X_CBUS_REG(n, 0x10)
-#define LS1X_CBUS_THIRD(n) LS1X_CBUS_REG(n, 0x20)
-#define LS1X_CBUS_FOURTHT(n) LS1X_CBUS_REG(n, 0x30)
-#define LS1X_CBUS_FIFTHT(n) LS1X_CBUS_REG(n, 0x40)
-
-#endif
-
-#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 75c1f4061700..22449d57f744 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -6,20 +6,12 @@ choice
config MACH_LSGZ_1B_DEV
bool "LSGZ 1B DEV board"
- select LOONGSON1_LS1B
help
Enable this to include the FDT for the LSGZ 1B DEV board.
config MACH_SMARTLOONG_1C
bool "Smartloong 1C board"
- select LOONGSON1_LS1C
help
Enable this to include the FDT for the Smartloong 1C board.
endchoice
-
-config LOONGSON1_LS1B
- bool
-
-config LOONGSON1_LS1C
- bool
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
index 2d1b985dad71..53a97b2b8d77 100644
--- a/arch/mips/loongson32/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -4,16 +4,3 @@
#
obj-$(CONFIG_MACH_LOONGSON32) += init.o proc.o
-obj-$(CONFIG_MACH_LOONGSON32) += common/
-
-#
-# Loongson LS1B board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
-
-#
-# Loongson LS1C board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1C) += ls1c/
diff --git a/arch/mips/loongson32/common/Makefile b/arch/mips/loongson32/common/Makefile
deleted file mode 100644
index 25e54b4fca7c..000000000000
--- a/arch/mips/loongson32/common/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for common code of loongson1 based machines.
-#
-
-obj-y += platform.o
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
deleted file mode 100644
index 9783c34f39b4..000000000000
--- a/arch/mips/loongson32/common/platform.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sizes.h>
-#include <linux/usb/ehci_pdriver.h>
-
-#include <platform.h>
-#include <loongson1.h>
-#include <dma.h>
-#include <nand.h>
-#include <irq.h>
diff --git a/arch/mips/loongson32/ls1b/Makefile b/arch/mips/loongson32/ls1b/Makefile
deleted file mode 100644
index 33c574dc0f7f..000000000000
--- a/arch/mips/loongson32/ls1b/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for loongson1B based machines.
-#
-
-obj-y += board.o
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
deleted file mode 100644
index ff28f44fa687..000000000000
--- a/arch/mips/loongson32/ls1b/board.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
- */
-
-#include <linux/leds.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sizes.h>
-
-#include <loongson1.h>
-#include <dma.h>
-#include <nand.h>
-#include <platform.h>
-
-static struct platform_device *ls1b_platform_devices[] __initdata = {
-};
-
-static int __init ls1b_platform_init(void)
-{
- return platform_add_devices(ls1b_platform_devices,
- ARRAY_SIZE(ls1b_platform_devices));
-}
-
-arch_initcall(ls1b_platform_init);
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
deleted file mode 100644
index 1cf3aa264d55..000000000000
--- a/arch/mips/loongson32/ls1c/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for loongson1C based machines.
-#
-
-obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
deleted file mode 100644
index e0b0eb94077e..000000000000
--- a/arch/mips/loongson32/ls1c/board.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
- */
-
-#include <platform.h>
-
-static struct platform_device *ls1c_platform_devices[] __initdata = {
-};
-
-static int __init ls1c_platform_init(void)
-{
- return platform_add_devices(ls1c_platform_devices,
- ARRAY_SIZE(ls1c_platform_devices));
-}
-
-arch_initcall(ls1c_platform_init);
--
2.39.2
next prev parent reply other threads:[~2023-07-29 13:45 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-29 13:43 [PATCH 00/17] MIPS: loongson32: Convert all platform devices to DT Keguang Zhang
2023-07-29 13:43 ` [PATCH 01/17] MIPS: loongson32: Get the system type from DT Keguang Zhang
2023-07-29 13:43 ` [PATCH 02/17] MIPS: Modify the Loongson1 PRID_REV Keguang Zhang
2023-08-01 13:52 ` Philippe Mathieu-Daudé
2023-07-29 13:43 ` [PATCH 03/17] MIPS: dts: Add basic DT support for Loongson-1 boards Keguang Zhang
2023-07-30 17:11 ` Du Huanpeng
2023-07-31 3:06 ` Keguang Zhang
2023-07-29 13:43 ` [PATCH 04/17] MIPS: loongson32: Modify Loongson-1B/1C related Kconfig options Keguang Zhang
2023-07-29 13:43 ` [PATCH 05/17] MIPS: loongson32: Adapt the common code to support DT Keguang Zhang
2023-07-29 13:43 ` [PATCH 06/17] MIPS: loongson32: Convert platform IRQ driver to DT Keguang Zhang
2023-07-30 8:24 ` Krzysztof Kozlowski
2023-07-31 2:52 ` Keguang Zhang
2023-07-29 13:43 ` [PATCH 07/17] MIPS: loongson32: Convert UART platform device " Keguang Zhang
2023-07-30 8:26 ` Krzysztof Kozlowski
2023-07-31 3:04 ` Keguang Zhang
2023-07-31 3:32 ` Keguang Zhang
2023-07-31 6:56 ` Krzysztof Kozlowski
2023-07-29 13:43 ` [PATCH 08/17] MIPS: loongson32: Convert Ethernet " Keguang Zhang
2023-08-01 18:21 ` Serge Semin
2023-08-02 3:10 ` Keguang Zhang
2023-08-02 9:44 ` Serge Semin
2023-08-02 11:19 ` Keguang Zhang
2023-08-02 12:42 ` Serge Semin
2023-08-02 10:31 ` Du Huanpeng
2023-08-02 11:30 ` Keguang Zhang
2023-07-29 13:43 ` [PATCH 09/17] MIPS: loongson32: Convert GPIO " Keguang Zhang
2023-07-29 13:43 ` [PATCH 10/17] MIPS: loongson32: Convert GPIO LED " Keguang Zhang
2023-07-29 13:43 ` [PATCH 11/17] MIPS: loongson32: Convert USB host " Keguang Zhang
2023-07-29 13:43 ` [PATCH 12/17] MIPS: loongson32: Convert RTC " Keguang Zhang
2023-07-29 13:43 ` [PATCH 13/17] MIPS: loongson32: Convert watchdog " Keguang Zhang
2023-07-29 13:43 ` [PATCH 14/17] mips: dts: loongson1b: Add PWM timer clocksource Keguang Zhang
2023-07-30 8:27 ` Krzysztof Kozlowski
2023-07-29 13:43 ` Keguang Zhang [this message]
2023-07-29 13:43 ` [PATCH 16/17] MIPS: configs: Update and rename loongson1b_defconfig Keguang Zhang
2023-07-29 13:43 ` [PATCH 17/17] MIPS: configs: Update and rename loongson1c_defconfig Keguang Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230729134318.1694467-16-keguang.zhang@gmail.com \
--to=keguang.zhang@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.