From: William Qiu <william.qiu@starfivetech.com> To: <devicetree@vger.kernel.org>, <linux-spi@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org> Cc: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Emil Renner Berthing <kernel@esmil.dk>, Ziv Xu <ziv.xu@starfivetech.com>, William Qiu <william.qiu@starfivetech.com> Subject: [PATCH v6 0/3] Add initialization of clock for StarFive JH7110 SoC Date: Fri, 4 Aug 2023 10:02:51 +0800 [thread overview] Message-ID: <20230804020254.291239-1-william.qiu@starfivetech.com> (raw) Hi, This patchset adds initial rudimentary support for the StarFive Quad SPI controller driver. And this driver will be used in StarFive's VisionFive 2 board. In 6.4, the QSPI_AHB and QSPI_APB clocks changed from the default ON state to the default OFF state, so these clocks need to be enabled in the driver.At the same time, dts patch is added to this series. Changes v5->v4: - Rebased to v6.4rc4. - Dropped the Reported-by tags. Changes v4->v5: - Rebased to v6.5rc2. - Changed the way to initialization the clocks. - Changed the layout for the SPI flash. Changes v3->v4: - Added minItems for clocks. - Added clock names property. - Fixed formatting issues. Changes v2->v3: - Rebased to v6.4rc6. - Renamed the clock names. - Changed the variable definition type. Changes v1->v2: - Renamed the clock names. - Specified a different array of clocks. - Used clk_bulk_ APIs. The patch series is based on v6.5rc4. William Qiu (3): dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC spi: cadence-quadspi: Add clock configuration for StarFive JH7110 QSPI riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC .../bindings/spi/cdns,qspi-nor.yaml | 12 +++- .../jh7110-starfive-visionfive-2.dtsi | 36 ++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 19 ++++++ drivers/spi/spi-cadence-quadspi.c | 67 +++++++++++++++++++ 4 files changed, 133 insertions(+), 1 deletion(-) -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: William Qiu <william.qiu@starfivetech.com> To: <devicetree@vger.kernel.org>, <linux-spi@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org> Cc: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Emil Renner Berthing <kernel@esmil.dk>, Ziv Xu <ziv.xu@starfivetech.com>, William Qiu <william.qiu@starfivetech.com> Subject: [PATCH v6 0/3] Add initialization of clock for StarFive JH7110 SoC Date: Fri, 4 Aug 2023 10:02:51 +0800 [thread overview] Message-ID: <20230804020254.291239-1-william.qiu@starfivetech.com> (raw) Hi, This patchset adds initial rudimentary support for the StarFive Quad SPI controller driver. And this driver will be used in StarFive's VisionFive 2 board. In 6.4, the QSPI_AHB and QSPI_APB clocks changed from the default ON state to the default OFF state, so these clocks need to be enabled in the driver.At the same time, dts patch is added to this series. Changes v5->v4: - Rebased to v6.4rc4. - Dropped the Reported-by tags. Changes v4->v5: - Rebased to v6.5rc2. - Changed the way to initialization the clocks. - Changed the layout for the SPI flash. Changes v3->v4: - Added minItems for clocks. - Added clock names property. - Fixed formatting issues. Changes v2->v3: - Rebased to v6.4rc6. - Renamed the clock names. - Changed the variable definition type. Changes v1->v2: - Renamed the clock names. - Specified a different array of clocks. - Used clk_bulk_ APIs. The patch series is based on v6.5rc4. William Qiu (3): dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC spi: cadence-quadspi: Add clock configuration for StarFive JH7110 QSPI riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC .../bindings/spi/cdns,qspi-nor.yaml | 12 +++- .../jh7110-starfive-visionfive-2.dtsi | 36 ++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 19 ++++++ drivers/spi/spi-cadence-quadspi.c | 67 +++++++++++++++++++ 4 files changed, 133 insertions(+), 1 deletion(-) -- 2.34.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2023-08-04 2:03 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-08-04 2:02 William Qiu [this message] 2023-08-04 2:02 ` [PATCH v6 0/3] Add initialization of clock for StarFive JH7110 SoC William Qiu 2023-08-04 2:02 ` [PATCH v6 1/3] dt-bindings: qspi: cdns,qspi-nor: Add clocks " William Qiu 2023-08-04 2:02 ` William Qiu 2023-08-04 2:02 ` [PATCH v6 2/3] spi: cadence-quadspi: Add clock configuration for StarFive JH7110 QSPI William Qiu 2023-08-04 2:02 ` William Qiu 2023-08-04 2:02 ` [PATCH v6 3/3] riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC William Qiu 2023-08-04 2:02 ` William Qiu 2023-08-04 19:04 ` (subset) [PATCH v6 0/3] Add initialization of clock " Mark Brown 2023-08-04 19:04 ` Mark Brown 2023-08-05 9:09 ` Conor Dooley 2023-08-05 9:09 ` Conor Dooley
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230804020254.291239-1-william.qiu@starfivetech.com \ --to=william.qiu@starfivetech.com \ --cc=broonie@kernel.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=kernel@esmil.dk \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=linux-spi@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=ziv.xu@starfivetech.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.