All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-efi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Ard Biesheuvel <ardb@kernel.org>,
	Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Ingo Molnar <mingo@redhat.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH v9 05/23] x86/decompressor: Avoid magic offsets for EFI handover entrypoint
Date: Mon,  7 Aug 2023 18:27:02 +0200	[thread overview]
Message-ID: <20230807162720.545787-6-ardb@kernel.org> (raw)
In-Reply-To: <20230807162720.545787-1-ardb@kernel.org>

The native 32-bit or 64-bit EFI handover protocol entrypoint offset
relative to the respective startup_32/64 address is described in
boot_params as handover_offset, so that the special Linux/x86 aware EFI
loader can find it there.

When mixed mode is enabled, this single field has to describe this
offset for both the 32-bit and 64-bit entrypoints, so their respective
relative offsets have to be identical. Given that startup_32 and
startup_64 are 0x200 bytes apart, and the EFI handover entrypoint
resides at a fixed offset, the 32-bit and 64-bit versions of those
entrypoints must be exactly 0x200 bytes apart as well.

Currently, hard-coded fixed offsets are used to ensure this, but it is
sufficient to emit the 64-bit entrypoint 0x200 bytes after the 32-bit
one, wherever it happens to reside. This allows this code (which is now
EFI mixed mode specific) to be moved into efi_mixed.S and out of the
startup code in head_64.S.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/x86/boot/compressed/efi_mixed.S | 20 +++++++++++++++++++-
 arch/x86/boot/compressed/head_64.S   | 18 ------------------
 2 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
index dcc562c8f7f35162..9308b595f6f0a5de 100644
--- a/arch/x86/boot/compressed/efi_mixed.S
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -140,6 +140,16 @@ SYM_FUNC_START(__efi64_thunk)
 SYM_FUNC_END(__efi64_thunk)
 
 	.code32
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+SYM_FUNC_START(efi32_stub_entry)
+	add	$0x4, %esp		/* Discard return address */
+	popl	%ecx
+	popl	%edx
+	popl	%esi
+	jmp	efi32_entry
+SYM_FUNC_END(efi32_stub_entry)
+#endif
+
 /*
  * EFI service pointer must be in %edi.
  *
@@ -220,7 +230,7 @@ SYM_FUNC_END(efi_enter32)
  * stub may still exit and return to the firmware using the Exit() EFI boot
  * service.]
  */
-SYM_FUNC_START(efi32_entry)
+SYM_FUNC_START_LOCAL(efi32_entry)
 	call	1f
 1:	pop	%ebx
 
@@ -320,6 +330,14 @@ SYM_FUNC_START(efi32_pe_entry)
 	RET
 SYM_FUNC_END(efi32_pe_entry)
 
+#ifdef CONFIG_EFI_HANDOVER_PROTOCOL
+	.org	efi32_stub_entry + 0x200
+	.code64
+SYM_FUNC_START_NOALIGN(efi64_stub_entry)
+	jmp	efi_stub_entry
+SYM_FUNC_END(efi64_stub_entry)
+#endif
+
 	.section ".rodata"
 	/* EFI loaded image protocol GUID */
 	.balign 4
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index e6880208b9a1b90a..a3f764daf3a3adbc 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -294,17 +294,6 @@ SYM_FUNC_START(startup_32)
 	lret
 SYM_FUNC_END(startup_32)
 
-#if IS_ENABLED(CONFIG_EFI_MIXED) && IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL)
-	.org 0x190
-SYM_FUNC_START(efi32_stub_entry)
-	add	$0x4, %esp		/* Discard return address */
-	popl	%ecx
-	popl	%edx
-	popl	%esi
-	jmp	efi32_entry
-SYM_FUNC_END(efi32_stub_entry)
-#endif
-
 	.code64
 	.org 0x200
 SYM_CODE_START(startup_64)
@@ -542,13 +531,6 @@ trampoline_return:
 	jmp	*%rax
 SYM_CODE_END(startup_64)
 
-#if IS_ENABLED(CONFIG_EFI_MIXED) && IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL)
-	.org 0x390
-SYM_FUNC_START(efi64_stub_entry)
-	jmp	efi_stub_entry
-SYM_FUNC_END(efi64_stub_entry)
-#endif
-
 	.text
 SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
 
-- 
2.39.2


  parent reply	other threads:[~2023-08-07 16:28 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-07 16:26 [PATCH v9 00/23] efi/x86: Avoid bare metal decompressor during EFI boot Ard Biesheuvel
2023-08-07 16:26 ` [PATCH v9 01/23] x86/decompressor: Don't rely on upper 32 bits of GPRs being preserved Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:26 ` [PATCH v9 02/23] x86/head_64: Store boot_params pointer in callee save register Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 03/23] x86/efistub: Branch straight to kernel entry point from C code Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 04/23] x86/efistub: Simplify and clean up handover entry code Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` Ard Biesheuvel [this message]
2023-08-08  8:44   ` [tip: x86/boot] x86/decompressor: Avoid magic offsets for EFI handover entrypoint tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 06/23] x86/efistub: Clear BSS in EFI handover protocol entrypoint Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 07/23] x86/decompressor: Store boot_params pointer in callee save register Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 08/23] x86/decompressor: Assign paging related global variables earlier Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 09/23] x86/decompressor: Call trampoline as a normal function Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 10/23] x86/decompressor: Use standard calling convention for trampoline Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 11/23] x86/decompressor: Avoid the need for a stack in the 32-bit trampoline Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 12/23] x86/decompressor: Call trampoline directly from C code Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 13/23] x86/decompressor: Only call the trampoline when changing paging levels Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 14/23] x86/decompressor: Pass pgtable address to trampoline directly Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 15/23] x86/decompressor: Merge trampoline cleanup with switching code Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 16/23] x86/efistub: Perform 4/5 level paging switch from the stub Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 17/23] x86/efistub: Prefer EFI memory attributes protocol over DXE services Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 18/23] decompress: Use 8 byte alignment Ard Biesheuvel
2023-08-08  8:44   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 19/23] x86/decompressor: Move global symbol references to C code Ard Biesheuvel
2023-08-08  8:43   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 20/23] x86/decompressor: Factor out kernel decompression and relocation Ard Biesheuvel
2023-08-08  8:43   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 21/23] efi/libstub: Add limit argument to efi_random_alloc() Ard Biesheuvel
2023-08-08  8:43   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 22/23] x86/efistub: Perform SNP feature test while running in the firmware Ard Biesheuvel
2023-08-08  8:43   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel
2023-08-07 16:27 ` [PATCH v9 23/23] x86/efistub: Avoid legacy decompressor when doing EFI boot Ard Biesheuvel
2023-08-08  8:43   ` [tip: x86/boot] " tip-bot2 for Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230807162720.545787-6-ardb@kernel.org \
    --to=ardb@kernel.org \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.