From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Sylwester Nawrocki <s.nawrocki@samsung.com>, Mauro Carvalho Chehab <mchehab@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Alim Akhtar <alim.akhtar@samsung.com>, linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Rob Herring <robh@kernel.org> Subject: [PATCH v3 1/3] media: dt-bindings: samsung,exynos4212-fimc-is: replace duplicate pmu node with phandle Date: Tue, 15 Aug 2023 08:07:37 +0200 [thread overview] Message-ID: <20230815060739.30160-1-krzysztof.kozlowski@linaro.org> (raw) The FIMC IS camera must access the PMU (Power Management Unit) IO memory to control camera power. This was achieved by duplicating the PMU node as its child like: soc@0 { system-controller@10020000 { ... }; // Real PMU camera@11800000 { fimc-is@12000000 { // FIMC IS camera node pmu@10020000 { reg = <0x10020000 0x3000>; // Fake PMU node }; }; }; }; This is not a correct representation of the hardware. Mapping the PMU (Power Management Unit) IO memory should be via syscon-like phandle (samsung,pmu-syscon, already used for other drivers), not by duplicating "pmu" Devicetree node inside the FIMC IS. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes in v3: 1. None Changes in v2: 1. Add Rb tag. --- .../media/samsung,exynos4212-fimc-is.yaml | 15 ++++++++++----- .../devicetree/bindings/media/samsung,fimc.yaml | 5 +---- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml index 3691cd4962b2..3a5ff3f47060 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml @@ -75,13 +75,20 @@ properties: power-domains: maxItems: 1 + samsung,pmu-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Power Management Unit (PMU) system controller interface, used to + power/start the ISP. + patternProperties: "^pmu@[0-9a-f]+$": type: object additionalProperties: false + deprecated: true description: Node representing the SoC's Power Management Unit (duplicated with the - correct PMU node in the SoC). + correct PMU node in the SoC). Deprecated, use samsung,pmu-syscon. properties: reg: @@ -131,6 +138,7 @@ required: - clock-names - interrupts - ranges + - samsung,pmu-syscon - '#size-cells' additionalProperties: false @@ -179,15 +187,12 @@ examples: <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - i2c-isp@12140000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x12140000 0x100>; diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml index 79ff6d83a9fd..530a08f5d3fe 100644 --- a/Documentation/devicetree/bindings/media/samsung,fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -236,15 +236,12 @@ examples: <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - i2c-isp@12140000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x12140000 0x100>; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> To: Sylwester Nawrocki <s.nawrocki@samsung.com>, Mauro Carvalho Chehab <mchehab@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Alim Akhtar <alim.akhtar@samsung.com>, linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Rob Herring <robh@kernel.org> Subject: [PATCH v3 1/3] media: dt-bindings: samsung,exynos4212-fimc-is: replace duplicate pmu node with phandle Date: Tue, 15 Aug 2023 08:07:37 +0200 [thread overview] Message-ID: <20230815060739.30160-1-krzysztof.kozlowski@linaro.org> (raw) The FIMC IS camera must access the PMU (Power Management Unit) IO memory to control camera power. This was achieved by duplicating the PMU node as its child like: soc@0 { system-controller@10020000 { ... }; // Real PMU camera@11800000 { fimc-is@12000000 { // FIMC IS camera node pmu@10020000 { reg = <0x10020000 0x3000>; // Fake PMU node }; }; }; }; This is not a correct representation of the hardware. Mapping the PMU (Power Management Unit) IO memory should be via syscon-like phandle (samsung,pmu-syscon, already used for other drivers), not by duplicating "pmu" Devicetree node inside the FIMC IS. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes in v3: 1. None Changes in v2: 1. Add Rb tag. --- .../media/samsung,exynos4212-fimc-is.yaml | 15 ++++++++++----- .../devicetree/bindings/media/samsung,fimc.yaml | 5 +---- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml index 3691cd4962b2..3a5ff3f47060 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml @@ -75,13 +75,20 @@ properties: power-domains: maxItems: 1 + samsung,pmu-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Power Management Unit (PMU) system controller interface, used to + power/start the ISP. + patternProperties: "^pmu@[0-9a-f]+$": type: object additionalProperties: false + deprecated: true description: Node representing the SoC's Power Management Unit (duplicated with the - correct PMU node in the SoC). + correct PMU node in the SoC). Deprecated, use samsung,pmu-syscon. properties: reg: @@ -131,6 +138,7 @@ required: - clock-names - interrupts - ranges + - samsung,pmu-syscon - '#size-cells' additionalProperties: false @@ -179,15 +187,12 @@ examples: <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - i2c-isp@12140000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x12140000 0x100>; diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml index 79ff6d83a9fd..530a08f5d3fe 100644 --- a/Documentation/devicetree/bindings/media/samsung,fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -236,15 +236,12 @@ examples: <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - i2c-isp@12140000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x12140000 0x100>; -- 2.34.1
next reply other threads:[~2023-08-15 6:08 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-08-15 6:07 Krzysztof Kozlowski [this message] 2023-08-15 6:07 ` [PATCH v3 1/3] media: dt-bindings: samsung,exynos4212-fimc-is: replace duplicate pmu node with phandle Krzysztof Kozlowski 2023-08-15 6:07 ` [PATCH v3 2/3] media: dt-bindings: samsung,fimc: correct unit addresses in DTS example Krzysztof Kozlowski 2023-08-15 6:07 ` Krzysztof Kozlowski 2023-08-15 6:07 ` [PATCH v3 3/3] media: exynos4-is: fimc-is: replace duplicate pmu node with phandle Krzysztof Kozlowski 2023-08-15 6:07 ` Krzysztof Kozlowski 2023-09-20 12:27 ` Krzysztof Kozlowski 2023-09-20 12:27 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230815060739.30160-1-krzysztof.kozlowski@linaro.org \ --to=krzysztof.kozlowski@linaro.org \ --cc=alim.akhtar@samsung.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ --cc=s.nawrocki@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.