From: Anshuman Gupta <anshuman.gupta@intel.com> To: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org, rodrigo.vivi@intel.com, lidong.wang@intel.com, jianshui.yu@intel.com Subject: [Intel-gfx] [PATCH v2] drm/i915/dgfx: Enable d3cold at s2idle Date: Wed, 16 Aug 2023 18:22:16 +0530 [thread overview] Message-ID: <20230816125216.1722002-1-anshuman.gupta@intel.com> (raw) System wide suspend already has support for lmem save/restore during suspend therefore enabling d3cold for s2idle and keepng it disable for runtime PM.(Refer below commit for d3cold runtime PM disable justification) 'commit 66eb93e71a7a ("drm/i915/dgfx: Keep PCI autosuspend control 'on' by default on all dGPU")' It will reduce the DG2 Card power consumption to ~0 Watt for s2idle power KPI. v2: - Added "Cc: stable@vger.kernel.org". Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8755 Cc: stable@vger.kernel.org Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> --- drivers/gpu/drm/i915/i915_driver.c | 33 ++++++++++++++++-------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c index b870c0df081a..ec4d26b3c17c 100644 --- a/drivers/gpu/drm/i915/i915_driver.c +++ b/drivers/gpu/drm/i915/i915_driver.c @@ -443,7 +443,6 @@ static int i915_pcode_init(struct drm_i915_private *i915) static int i915_driver_hw_probe(struct drm_i915_private *dev_priv) { struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); - struct pci_dev *root_pdev; int ret; if (i915_inject_probe_failure(dev_priv)) @@ -557,15 +556,6 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv) intel_bw_init_hw(dev_priv); - /* - * FIXME: Temporary hammer to avoid freezing the machine on our DGFX - * This should be totally removed when we handle the pci states properly - * on runtime PM and on s2idle cases. - */ - root_pdev = pcie_find_root_port(pdev); - if (root_pdev) - pci_d3cold_disable(root_pdev); - return 0; err_opregion: @@ -591,7 +581,6 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv) static void i915_driver_hw_remove(struct drm_i915_private *dev_priv) { struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); - struct pci_dev *root_pdev; i915_perf_fini(dev_priv); @@ -599,10 +588,6 @@ static void i915_driver_hw_remove(struct drm_i915_private *dev_priv) if (pdev->msi_enabled) pci_disable_msi(pdev); - - root_pdev = pcie_find_root_port(pdev); - if (root_pdev) - pci_d3cold_enable(root_pdev); } /** @@ -1519,6 +1504,8 @@ static int intel_runtime_suspend(struct device *kdev) { struct drm_i915_private *dev_priv = kdev_to_i915(kdev); struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; + struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); + struct pci_dev *root_pdev; struct intel_gt *gt; int ret, i; @@ -1570,6 +1557,15 @@ static int intel_runtime_suspend(struct device *kdev) drm_err(&dev_priv->drm, "Unclaimed access detected prior to suspending\n"); + /* + * FIXME: Temporary hammer to avoid freezing the machine on our DGFX + * This should be totally removed when we handle the pci states properly + * on runtime PM. + */ + root_pdev = pcie_find_root_port(pdev); + if (root_pdev) + pci_d3cold_disable(root_pdev); + rpm->suspended = true; /* @@ -1608,6 +1604,8 @@ static int intel_runtime_resume(struct device *kdev) { struct drm_i915_private *dev_priv = kdev_to_i915(kdev); struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; + struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); + struct pci_dev *root_pdev; struct intel_gt *gt; int ret, i; @@ -1621,6 +1619,11 @@ static int intel_runtime_resume(struct device *kdev) intel_opregion_notify_adapter(dev_priv, PCI_D0); rpm->suspended = false; + + root_pdev = pcie_find_root_port(pdev); + if (root_pdev) + pci_d3cold_enable(root_pdev); + if (intel_uncore_unclaimed_mmio(&dev_priv->uncore)) drm_dbg(&dev_priv->drm, "Unclaimed access during suspend, bios?\n"); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Anshuman Gupta <anshuman.gupta@intel.com> To: intel-gfx@lists.freedesktop.org Cc: badal.nilawar@intel.com, riana.tauro@intel.com, rodrigo.vivi@intel.com, jianshui.yu@intel.com, lidong.wang@intel.com, Anshuman Gupta <anshuman.gupta@intel.com>, stable@vger.kernel.org Subject: [PATCH v2] drm/i915/dgfx: Enable d3cold at s2idle Date: Wed, 16 Aug 2023 18:22:16 +0530 [thread overview] Message-ID: <20230816125216.1722002-1-anshuman.gupta@intel.com> (raw) System wide suspend already has support for lmem save/restore during suspend therefore enabling d3cold for s2idle and keepng it disable for runtime PM.(Refer below commit for d3cold runtime PM disable justification) 'commit 66eb93e71a7a ("drm/i915/dgfx: Keep PCI autosuspend control 'on' by default on all dGPU")' It will reduce the DG2 Card power consumption to ~0 Watt for s2idle power KPI. v2: - Added "Cc: stable@vger.kernel.org". Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8755 Cc: stable@vger.kernel.org Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> --- drivers/gpu/drm/i915/i915_driver.c | 33 ++++++++++++++++-------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c index b870c0df081a..ec4d26b3c17c 100644 --- a/drivers/gpu/drm/i915/i915_driver.c +++ b/drivers/gpu/drm/i915/i915_driver.c @@ -443,7 +443,6 @@ static int i915_pcode_init(struct drm_i915_private *i915) static int i915_driver_hw_probe(struct drm_i915_private *dev_priv) { struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); - struct pci_dev *root_pdev; int ret; if (i915_inject_probe_failure(dev_priv)) @@ -557,15 +556,6 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv) intel_bw_init_hw(dev_priv); - /* - * FIXME: Temporary hammer to avoid freezing the machine on our DGFX - * This should be totally removed when we handle the pci states properly - * on runtime PM and on s2idle cases. - */ - root_pdev = pcie_find_root_port(pdev); - if (root_pdev) - pci_d3cold_disable(root_pdev); - return 0; err_opregion: @@ -591,7 +581,6 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv) static void i915_driver_hw_remove(struct drm_i915_private *dev_priv) { struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); - struct pci_dev *root_pdev; i915_perf_fini(dev_priv); @@ -599,10 +588,6 @@ static void i915_driver_hw_remove(struct drm_i915_private *dev_priv) if (pdev->msi_enabled) pci_disable_msi(pdev); - - root_pdev = pcie_find_root_port(pdev); - if (root_pdev) - pci_d3cold_enable(root_pdev); } /** @@ -1519,6 +1504,8 @@ static int intel_runtime_suspend(struct device *kdev) { struct drm_i915_private *dev_priv = kdev_to_i915(kdev); struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; + struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); + struct pci_dev *root_pdev; struct intel_gt *gt; int ret, i; @@ -1570,6 +1557,15 @@ static int intel_runtime_suspend(struct device *kdev) drm_err(&dev_priv->drm, "Unclaimed access detected prior to suspending\n"); + /* + * FIXME: Temporary hammer to avoid freezing the machine on our DGFX + * This should be totally removed when we handle the pci states properly + * on runtime PM. + */ + root_pdev = pcie_find_root_port(pdev); + if (root_pdev) + pci_d3cold_disable(root_pdev); + rpm->suspended = true; /* @@ -1608,6 +1604,8 @@ static int intel_runtime_resume(struct device *kdev) { struct drm_i915_private *dev_priv = kdev_to_i915(kdev); struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; + struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); + struct pci_dev *root_pdev; struct intel_gt *gt; int ret, i; @@ -1621,6 +1619,11 @@ static int intel_runtime_resume(struct device *kdev) intel_opregion_notify_adapter(dev_priv, PCI_D0); rpm->suspended = false; + + root_pdev = pcie_find_root_port(pdev); + if (root_pdev) + pci_d3cold_enable(root_pdev); + if (intel_uncore_unclaimed_mmio(&dev_priv->uncore)) drm_dbg(&dev_priv->drm, "Unclaimed access during suspend, bios?\n"); -- 2.25.1
next reply other threads:[~2023-08-16 12:52 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-08-16 12:52 Anshuman Gupta [this message] 2023-08-16 12:52 ` [PATCH v2] drm/i915/dgfx: Enable d3cold at s2idle Anshuman Gupta 2023-08-16 14:42 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dgfx: Enable d3cold at s2idle (rev2) Patchwork 2023-08-16 14:42 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork 2023-08-16 15:02 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork 2023-08-16 21:03 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork 2023-08-17 13:10 ` [Intel-gfx] [PATCH v2] drm/i915/dgfx: Enable d3cold at s2idle Aaron Ma 2023-08-17 13:10 ` Aaron Ma 2023-08-17 14:39 ` Yu, Jianshui 2023-08-17 14:39 ` Yu, Jianshui 2023-08-17 16:07 ` [Intel-gfx] " Gupta, Anshuman 2023-08-17 16:07 ` Gupta, Anshuman 2023-08-18 0:36 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915/dgfx: Enable d3cold at s2idle (rev3) Patchwork
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230816125216.1722002-1-anshuman.gupta@intel.com \ --to=anshuman.gupta@intel.com \ --cc=intel-gfx@lists.freedesktop.org \ --cc=jianshui.yu@intel.com \ --cc=lidong.wang@intel.com \ --cc=rodrigo.vivi@intel.com \ --cc=stable@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.