From: Andreas Kemnade <andreas@kemnade.info> To: dmitry.torokhov@gmail.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, rydberg@bitmath.org, andreas@kemnade.info, u.kleine-koenig@pengutronix.de, Jonathan.Cameron@huawei.com, linus.walleij@linaro.org, heiko@sntech.de, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 3/4] Input: zforce_ts: Accept standard touchscreen properties Date: Mon, 21 Aug 2023 19:11:50 +0200 [thread overview] Message-ID: <20230821171151.555091-4-andreas@kemnade.info> (raw) In-Reply-To: <20230821171151.555091-1-andreas@kemnade.info> Only driver-specific properties were accepted, change it to use the now-available standard properties. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- drivers/input/touchscreen/zforce_ts.c | 36 +++++++++++++-------------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c index 5be5112845e1..f4397497bbe9 100644 --- a/drivers/input/touchscreen/zforce_ts.c +++ b/drivers/input/touchscreen/zforce_ts.c @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/sysfs.h> #include <linux/input/mt.h> +#include <linux/input/touchscreen.h> #include <linux/platform_data/zforce_ts.h> #include <linux/regulator/consumer.h> #include <linux/of.h> @@ -106,6 +107,7 @@ struct zforce_point { struct zforce_ts { struct i2c_client *client; struct input_dev *input; + struct touchscreen_properties prop; const struct zforce_ts_platdata *pdata; char phys[32]; @@ -266,7 +268,6 @@ static int zforce_setconfig(struct zforce_ts *ts, char b1) static int zforce_start(struct zforce_ts *ts) { struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = ts->pdata; int ret; dev_dbg(&client->dev, "starting device\n"); @@ -277,7 +278,7 @@ static int zforce_start(struct zforce_ts *ts) return ret; } - ret = zforce_resolution(ts, pdata->x_max, pdata->y_max); + ret = zforce_resolution(ts, ts->prop.max_x, ts->prop.max_y); if (ret) { dev_err(&client->dev, "Unable to set resolution, %d\n", ret); goto error; @@ -337,7 +338,6 @@ static int zforce_stop(struct zforce_ts *ts) static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) { struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = ts->pdata; struct zforce_point point; int count, i, num = 0; @@ -355,8 +355,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) point.coord_y = payload[9 * i + 4] << 8 | payload[9 * i + 3]; - if (point.coord_x > pdata->x_max || - point.coord_y > pdata->y_max) { + if (point.coord_x > ts->prop.max_x || + point.coord_y > ts->prop.max_y) { dev_warn(&client->dev, "coordinates (%d,%d) invalid\n", point.coord_x, point.coord_y); point.coord_x = point.coord_y = 0; @@ -390,10 +390,11 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) point.state != STATE_UP); if (point.state != STATE_UP) { - input_report_abs(ts->input, ABS_MT_POSITION_X, - point.coord_x); - input_report_abs(ts->input, ABS_MT_POSITION_Y, - point.coord_y); + touchscreen_report_pos(ts->input, + &ts->prop, + point.coord_x, + point.coord_y, + true); input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, point.area_major); input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, @@ -719,15 +720,8 @@ static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev) return ERR_PTR(-ENOMEM); } - if (of_property_read_u32(np, "x-size", &pdata->x_max)) { - dev_err(dev, "failed to get x-size property\n"); - return ERR_PTR(-EINVAL); - } - - if (of_property_read_u32(np, "y-size", &pdata->y_max)) { - dev_err(dev, "failed to get y-size property\n"); - return ERR_PTR(-EINVAL); - } + of_property_read_u32(np, "x-size", &pdata->x_max); + of_property_read_u32(np, "y-size", &pdata->y_max); return pdata; } @@ -856,6 +850,12 @@ static int zforce_probe(struct i2c_client *client) input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + touchscreen_parse_properties(input_dev, true, &ts->prop); + if (ts->prop.max_x == 0 || ts->prop.max_y == 0) { + dev_err(&client->dev, "no size specified\n"); + return -EINVAL; + } + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, ZFORCE_MAX_AREA, 0, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, -- 2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Andreas Kemnade <andreas@kemnade.info> To: dmitry.torokhov@gmail.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com, rydberg@bitmath.org, andreas@kemnade.info, u.kleine-koenig@pengutronix.de, Jonathan.Cameron@huawei.com, linus.walleij@linaro.org, heiko@sntech.de, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 3/4] Input: zforce_ts: Accept standard touchscreen properties Date: Mon, 21 Aug 2023 19:11:50 +0200 [thread overview] Message-ID: <20230821171151.555091-4-andreas@kemnade.info> (raw) In-Reply-To: <20230821171151.555091-1-andreas@kemnade.info> Only driver-specific properties were accepted, change it to use the now-available standard properties. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- drivers/input/touchscreen/zforce_ts.c | 36 +++++++++++++-------------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c index 5be5112845e1..f4397497bbe9 100644 --- a/drivers/input/touchscreen/zforce_ts.c +++ b/drivers/input/touchscreen/zforce_ts.c @@ -20,6 +20,7 @@ #include <linux/device.h> #include <linux/sysfs.h> #include <linux/input/mt.h> +#include <linux/input/touchscreen.h> #include <linux/platform_data/zforce_ts.h> #include <linux/regulator/consumer.h> #include <linux/of.h> @@ -106,6 +107,7 @@ struct zforce_point { struct zforce_ts { struct i2c_client *client; struct input_dev *input; + struct touchscreen_properties prop; const struct zforce_ts_platdata *pdata; char phys[32]; @@ -266,7 +268,6 @@ static int zforce_setconfig(struct zforce_ts *ts, char b1) static int zforce_start(struct zforce_ts *ts) { struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = ts->pdata; int ret; dev_dbg(&client->dev, "starting device\n"); @@ -277,7 +278,7 @@ static int zforce_start(struct zforce_ts *ts) return ret; } - ret = zforce_resolution(ts, pdata->x_max, pdata->y_max); + ret = zforce_resolution(ts, ts->prop.max_x, ts->prop.max_y); if (ret) { dev_err(&client->dev, "Unable to set resolution, %d\n", ret); goto error; @@ -337,7 +338,6 @@ static int zforce_stop(struct zforce_ts *ts) static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) { struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = ts->pdata; struct zforce_point point; int count, i, num = 0; @@ -355,8 +355,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) point.coord_y = payload[9 * i + 4] << 8 | payload[9 * i + 3]; - if (point.coord_x > pdata->x_max || - point.coord_y > pdata->y_max) { + if (point.coord_x > ts->prop.max_x || + point.coord_y > ts->prop.max_y) { dev_warn(&client->dev, "coordinates (%d,%d) invalid\n", point.coord_x, point.coord_y); point.coord_x = point.coord_y = 0; @@ -390,10 +390,11 @@ static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) point.state != STATE_UP); if (point.state != STATE_UP) { - input_report_abs(ts->input, ABS_MT_POSITION_X, - point.coord_x); - input_report_abs(ts->input, ABS_MT_POSITION_Y, - point.coord_y); + touchscreen_report_pos(ts->input, + &ts->prop, + point.coord_x, + point.coord_y, + true); input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, point.area_major); input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, @@ -719,15 +720,8 @@ static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev) return ERR_PTR(-ENOMEM); } - if (of_property_read_u32(np, "x-size", &pdata->x_max)) { - dev_err(dev, "failed to get x-size property\n"); - return ERR_PTR(-EINVAL); - } - - if (of_property_read_u32(np, "y-size", &pdata->y_max)) { - dev_err(dev, "failed to get y-size property\n"); - return ERR_PTR(-EINVAL); - } + of_property_read_u32(np, "x-size", &pdata->x_max); + of_property_read_u32(np, "y-size", &pdata->y_max); return pdata; } @@ -856,6 +850,12 @@ static int zforce_probe(struct i2c_client *client) input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + touchscreen_parse_properties(input_dev, true, &ts->prop); + if (ts->prop.max_x == 0 || ts->prop.max_y == 0) { + dev_err(&client->dev, "no size specified\n"); + return -EINVAL; + } + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, ZFORCE_MAX_AREA, 0, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, -- 2.39.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-08-21 17:12 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-08-21 17:11 [PATCH v2 0/4] Input: zforce_ts: standard properties Andreas Kemnade 2023-08-21 17:11 ` Andreas Kemnade 2023-08-21 17:11 ` [PATCH v2 1/4] dt-bindings: touchscreen: convert neonode,zforce to json-schema Andreas Kemnade 2023-08-21 17:11 ` Andreas Kemnade 2023-08-22 5:53 ` Krzysztof Kozlowski 2023-08-22 5:53 ` Krzysztof Kozlowski 2023-08-21 17:11 ` [PATCH v2 2/4] dt-bindings: touchscreen: neonode,zforce: Use standard properties Andreas Kemnade 2023-08-21 17:11 ` Andreas Kemnade 2023-08-22 5:54 ` Krzysztof Kozlowski 2023-08-22 5:54 ` Krzysztof Kozlowski 2023-08-21 17:11 ` Andreas Kemnade [this message] 2023-08-21 17:11 ` [PATCH v2 3/4] Input: zforce_ts: Accept standard touchscreen properties Andreas Kemnade 2023-08-21 17:11 ` [PATCH v2 4/4] ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation Andreas Kemnade 2023-08-21 17:11 ` Andreas Kemnade 2023-09-18 6:42 ` [PATCH v2 0/4] Input: zforce_ts: standard properties Andreas Kemnade 2023-09-18 6:42 ` Andreas Kemnade
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230821171151.555091-4-andreas@kemnade.info \ --to=andreas@kemnade.info \ --cc=Jonathan.Cameron@huawei.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.torokhov@gmail.com \ --cc=festevam@gmail.com \ --cc=heiko@sntech.de \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=rydberg@bitmath.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=u.kleine-koenig@pengutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.