[PATCH -next v2 1/3] iio: adc: at91_adc: Use devm_clk_get_enabled() helper function

[Jinjie Ruan <ruanjinjie@huawei.com>]

The devm_clk_get_enabled() helper:
    - calls devm_clk_get()
    - calls clk_prepare_enable() and registers what is needed in order to
      call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
---
 drivers/iio/adc/at91_adc.c | 38 ++++++++++----------------------------
 1 file changed, 10 insertions(+), 28 deletions(-)

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index de6650f9c4b1..318e33ce22fb 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -1087,32 +1087,20 @@ static int at91_adc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	st->clk = devm_clk_get(&pdev->dev, "adc_clk");
+	st->clk = devm_clk_get_enabled(&pdev->dev, "adc_clk");
 	if (IS_ERR(st->clk)) {
-		dev_err(&pdev->dev, "Failed to get the clock.\n");
-		ret = PTR_ERR(st->clk);
-		goto error_free_irq;
-	}
-
-	ret = clk_prepare_enable(st->clk);
-	if (ret) {
 		dev_err(&pdev->dev,
 			"Could not prepare or enable the clock.\n");
+		ret = PTR_ERR(st->clk);
 		goto error_free_irq;
 	}
 
-	st->adc_clk = devm_clk_get(&pdev->dev, "adc_op_clk");
+	st->adc_clk = devm_clk_get_enabled(&pdev->dev, "adc_op_clk");
 	if (IS_ERR(st->adc_clk)) {
-		dev_err(&pdev->dev, "Failed to get the ADC clock.\n");
-		ret = PTR_ERR(st->adc_clk);
-		goto error_disable_clk;
-	}
-
-	ret = clk_prepare_enable(st->adc_clk);
-	if (ret) {
 		dev_err(&pdev->dev,
 			"Could not prepare or enable the ADC clock.\n");
-		goto error_disable_clk;
+		ret = PTR_ERR(st->adc_clk);
+		goto error_free_irq;
 	}
 
 	/*
@@ -1132,7 +1120,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	if (!st->startup_time) {
 		dev_err(&pdev->dev, "No startup time available.\n");
 		ret = -EINVAL;
-		goto error_disable_adc_clk;
+		goto error_free_irq;
 	}
 	ticks = (*st->caps->calc_startup_ticks)(st->startup_time, adc_clk_khz);
 
@@ -1160,7 +1148,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	ret = at91_adc_channel_init(idev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Couldn't initialize the channels.\n");
-		goto error_disable_adc_clk;
+		goto error_free_irq;
 	}
 
 	init_waitqueue_head(&st->wq_data_avail);
@@ -1175,19 +1163,19 @@ static int at91_adc_probe(struct platform_device *pdev)
 		ret = at91_adc_buffer_init(idev);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "Couldn't initialize the buffer.\n");
-			goto error_disable_adc_clk;
+			goto error_free_irq;
 		}
 
 		ret = at91_adc_trigger_init(idev);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "Couldn't setup the triggers.\n");
 			at91_adc_buffer_remove(idev);
-			goto error_disable_adc_clk;
+			goto error_free_irq;
 		}
 	} else {
 		ret = at91_ts_register(idev, pdev);
 		if (ret)
-			goto error_disable_adc_clk;
+			goto error_free_irq;
 
 		at91_ts_hw_init(idev, adc_clk_khz);
 	}
@@ -1207,10 +1195,6 @@ static int at91_adc_probe(struct platform_device *pdev)
 	} else {
 		at91_ts_unregister(st);
 	}
-error_disable_adc_clk:
-	clk_disable_unprepare(st->adc_clk);
-error_disable_clk:
-	clk_disable_unprepare(st->clk);
 error_free_irq:
 	free_irq(st->irq, idev);
 	return ret;
@@ -1228,8 +1212,6 @@ static int at91_adc_remove(struct platform_device *pdev)
 	} else {
 		at91_ts_unregister(st);
 	}
-	clk_disable_unprepare(st->adc_clk);
-	clk_disable_unprepare(st->clk);
 	free_irq(st->irq, idev);
 
 	return 0;
-- 
2.34.1