From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> To: patrick@stwcx.xyz, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au> Cc: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v12 2/2] ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC Date: Mon, 28 Aug 2023 14:51:36 +0800 [thread overview] Message-ID: <20230828065137.2332953-3-Delphine_CC_Chiu@wiwynn.com> (raw) In-Reply-To: <20230828065137.2332953-1-Delphine_CC_Chiu@wiwynn.com> Add linux device tree entry for Yosemite 4 devices connected to BMC. The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> --- Changelog: v12 - Add spi gpio config v11 - Add imux configs for i2c-mux - Add gpio and eeprom devices - Remove temperature-sensor 11-004a and 11-004b - Change power-sensor ina230 to ina233 v10 - Change to 128MB flash layout from 64MB v9 - Remove mac2/mac3 duplicated setting about no-hw-checksum v8 - Add description of Yosemite 4 - Remove unsupported ncsi config - Revise i2c-mux config - Correct power sensor i2c address - Restore i2c 11 bus-frequency to default v7 - Revise changelog format v6 - Change project name from yosemitev4 to yosemite4 v5 - Revise rtc setting - Remove duplicated multi-master setting v3 - Revise the bootargs to stdout-path - Revise i2c devices v2 - Revise the DTS node name --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 1102 +++++++++++++++++ 2 files changed, 1103 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index c68984322a86..5b9264b823f3 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ + aspeed-bmc-facebook-yosemite4.dtb \ aspeed-bmc-ibm-bonnell.dtb \ aspeed-bmc-ibm-everest.dtb \ aspeed-bmc-ibm-rainier.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts new file mode 100644 index 000000000000..851091a512dd --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -0,0 +1,1102 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2022 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Yosemite 4 BMC"; + compatible = "facebook,yosemite4-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + serial8 = &uart9; + + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + i2c32 = &imux32; + i2c33 = &imux33; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>; + }; + + spi_gpio: spi-gpio { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; + + tpmdev@0 { + compatible = "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart6 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&uart8 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + use-ncsi; + mlx,multi-host; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; + mlx,multi-host; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "bmc2"; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c1 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c2 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c3 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c4 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c5 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c6 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c7 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c8 { + status = "okay"; + bus-frequency = <400000>; + i2c-mux@70 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x70>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; + bus-frequency = <400000>; + i2c-mux@71 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x71>; + + imux20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + }; +}; + +&i2c10 { + status = "okay"; + bus-frequency = <400000>; + i2c-mux@74 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x74>; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + }; + }; + }; +}; + +&i2c11 { + status = "okay"; + power-sensor@10 { + compatible = "adi, adm1272"; + reg = <0x10>; + }; + + power-sensor@12 { + compatible = "adi, adm1272"; + reg = <0x12>; + }; + + gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@54 { + compatible = "atmel,24c256"; + reg = <0x54>; + }; +}; + +&i2c12 { + status = "okay"; + bus-frequency = <400000>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; +}; + +&i2c13 { + status = "okay"; + bus-frequency = <400000>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; +}; + +&i2c14 { + status = "okay"; + bus-frequency = <400000>; + adc@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <2>; + }; + + adc@35 { + compatible = "ti,adc128d818"; + reg = <0x35>; + ti,mode = /bits/ 8 <2>; + }; + + adc@37 { + compatible = "ti,adc128d818"; + reg = <0x37>; + ti,mode = /bits/ 8 <2>; + }; + + power-sensor@40 { + compatible = "ti,ina233"; + reg = <0x40>; + }; + + power-sensor@41 { + compatible = "ti,ina233"; + reg = <0x41>; + }; + + power-sensor@42 { + compatible = "ti,ina233"; + reg = <0x42>; + }; + + power-sensor@43 { + compatible = "ti,ina233"; + reg = <0x43>; + }; + + power-sensor@44 { + compatible = "ti,ina233"; + reg = <0x44>; + }; + + temperature-sensor@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + i2c-mux@71 { + compatible = "nxp,pca9846"; + #address-cells = <1>; + #size-cells = <0>; + + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x71>; + + imux30: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc@1f { + compatible = "ti,adc128d818"; + reg = <0x1f>; + ti,mode = /bits/ 8 <2>; + }; + + pwm@20{ + compatible = "max31790"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio@22{ + compatible = "ti,tca6424"; + reg = <0x22>; + }; + + pwm@23{ + compatible = "max31790"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + }; + + adc@33 { + compatible = "maxim,max11615"; + reg = <0x33>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + + gpio@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + imux31: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adc@1f { + compatible = "ti,adc128d818"; + reg = <0x1f>; + ti,mode = /bits/ 8 <2>; + }; + + pwm@20{ + compatible = "max31790"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio@22{ + compatible = "ti,tca6424"; + reg = <0x22>; + }; + + pwm@23{ + compatible = "max31790"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + }; + + adc@33 { + compatible = "maxim,max11615"; + reg = <0x33>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + + gpio@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x73>; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc@35 { + compatible = "maxim,max11617"; + reg = <0x35>; + }; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adc@35 { + compatible = "maxim,max11617"; + reg = <0x35>; + }; + }; + }; +}; + +&i2c15 { + status = "okay"; + mctp-controller; + multi-master; + bus-frequency = <400000>; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + i2c-mux@72 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x72>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&adc0 { + ref_voltage = <2500>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + ref_voltage = <2500>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>; +}; + + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> To: patrick@stwcx.xyz, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au> Cc: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v12 2/2] ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC Date: Mon, 28 Aug 2023 14:51:36 +0800 [thread overview] Message-ID: <20230828065137.2332953-3-Delphine_CC_Chiu@wiwynn.com> (raw) In-Reply-To: <20230828065137.2332953-1-Delphine_CC_Chiu@wiwynn.com> Add linux device tree entry for Yosemite 4 devices connected to BMC. The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> --- Changelog: v12 - Add spi gpio config v11 - Add imux configs for i2c-mux - Add gpio and eeprom devices - Remove temperature-sensor 11-004a and 11-004b - Change power-sensor ina230 to ina233 v10 - Change to 128MB flash layout from 64MB v9 - Remove mac2/mac3 duplicated setting about no-hw-checksum v8 - Add description of Yosemite 4 - Remove unsupported ncsi config - Revise i2c-mux config - Correct power sensor i2c address - Restore i2c 11 bus-frequency to default v7 - Revise changelog format v6 - Change project name from yosemitev4 to yosemite4 v5 - Revise rtc setting - Remove duplicated multi-master setting v3 - Revise the bootargs to stdout-path - Revise i2c devices v2 - Revise the DTS node name --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 1102 +++++++++++++++++ 2 files changed, 1103 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index c68984322a86..5b9264b823f3 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ + aspeed-bmc-facebook-yosemite4.dtb \ aspeed-bmc-ibm-bonnell.dtb \ aspeed-bmc-ibm-everest.dtb \ aspeed-bmc-ibm-rainier.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts new file mode 100644 index 000000000000..851091a512dd --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -0,0 +1,1102 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2022 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Yosemite 4 BMC"; + compatible = "facebook,yosemite4-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + serial8 = &uart9; + + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + i2c32 = &imux32; + i2c33 = &imux33; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>; + }; + + spi_gpio: spi-gpio { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; + + tpmdev@0 { + compatible = "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart6 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&uart8 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + use-ncsi; + mlx,multi-host; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + use-ncsi; + mlx,multi-host; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "bmc2"; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c1 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c2 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c3 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c4 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c5 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c6 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c7 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c8 { + status = "okay"; + bus-frequency = <400000>; + i2c-mux@70 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x70>; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; + bus-frequency = <400000>; + i2c-mux@71 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x71>; + + imux20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + + imux23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@49 { + compatible = "nxp,pca9537"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + }; + }; +}; + +&i2c10 { + status = "okay"; + bus-frequency = <400000>; + i2c-mux@74 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x74>; + + imux28: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux29: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; + + gpio@24 { + compatible = "nxp,pca9506"; + reg = <0x24>; + }; + }; + }; +}; + +&i2c11 { + status = "okay"; + power-sensor@10 { + compatible = "adi, adm1272"; + reg = <0x10>; + }; + + power-sensor@12 { + compatible = "adi, adm1272"; + reg = <0x12>; + }; + + gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + eeprom@54 { + compatible = "atmel,24c256"; + reg = <0x54>; + }; +}; + +&i2c12 { + status = "okay"; + bus-frequency = <400000>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; +}; + +&i2c13 { + status = "okay"; + bus-frequency = <400000>; + gpio@20 { + compatible = "nxp,pca9506"; + reg = <0x20>; + }; + + gpio@21 { + compatible = "nxp,pca9506"; + reg = <0x21>; + }; + + gpio@22 { + compatible = "nxp,pca9506"; + reg = <0x22>; + }; + + gpio@23 { + compatible = "nxp,pca9506"; + reg = <0x23>; + }; +}; + +&i2c14 { + status = "okay"; + bus-frequency = <400000>; + adc@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <2>; + }; + + adc@35 { + compatible = "ti,adc128d818"; + reg = <0x35>; + ti,mode = /bits/ 8 <2>; + }; + + adc@37 { + compatible = "ti,adc128d818"; + reg = <0x37>; + ti,mode = /bits/ 8 <2>; + }; + + power-sensor@40 { + compatible = "ti,ina233"; + reg = <0x40>; + }; + + power-sensor@41 { + compatible = "ti,ina233"; + reg = <0x41>; + }; + + power-sensor@42 { + compatible = "ti,ina233"; + reg = <0x42>; + }; + + power-sensor@43 { + compatible = "ti,ina233"; + reg = <0x43>; + }; + + power-sensor@44 { + compatible = "ti,ina233"; + reg = <0x44>; + }; + + temperature-sensor@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + i2c-mux@71 { + compatible = "nxp,pca9846"; + #address-cells = <1>; + #size-cells = <0>; + + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x71>; + + imux30: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc@1f { + compatible = "ti,adc128d818"; + reg = <0x1f>; + ti,mode = /bits/ 8 <2>; + }; + + pwm@20{ + compatible = "max31790"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio@22{ + compatible = "ti,tca6424"; + reg = <0x22>; + }; + + pwm@23{ + compatible = "max31790"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + }; + + adc@33 { + compatible = "maxim,max11615"; + reg = <0x33>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + + gpio@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + imux31: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adc@1f { + compatible = "ti,adc128d818"; + reg = <0x1f>; + ti,mode = /bits/ 8 <2>; + }; + + pwm@20{ + compatible = "max31790"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio@22{ + compatible = "ti,tca6424"; + reg = <0x22>; + }; + + pwm@23{ + compatible = "max31790"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + }; + + adc@33 { + compatible = "maxim,max11615"; + reg = <0x33>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + + gpio@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x73>; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc@35 { + compatible = "maxim,max11617"; + reg = <0x35>; + }; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adc@35 { + compatible = "maxim,max11617"; + reg = <0x35>; + }; + }; + }; +}; + +&i2c15 { + status = "okay"; + mctp-controller; + multi-master; + bus-frequency = <400000>; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + i2c-mux@72 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x72>; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&adc0 { + ref_voltage = <2500>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + ref_voltage = <2500>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>; +}; + + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-08-28 6:53 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-08-28 6:51 [PATCH v12 0/2] ARM: dts: Facebook Yosemite 4 platform Delphine CC Chiu 2023-08-28 6:51 ` Delphine CC Chiu 2023-08-28 6:51 ` [PATCH v12 1/2] dt-bindings: arm: aspeed: add Facebook Yosemite 4 board Delphine CC Chiu 2023-08-28 6:51 ` Delphine CC Chiu 2023-08-28 6:51 ` Delphine CC Chiu [this message] 2023-08-28 6:51 ` [PATCH v12 2/2] ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC Delphine CC Chiu 2023-08-29 14:14 ` Rob Herring 2023-08-29 14:14 ` Rob Herring 2023-09-01 7:55 ` Delphine_CC_Chiu/WYHQ/Wiwynn 2023-09-01 7:55 ` Delphine_CC_Chiu/WYHQ/Wiwynn
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230828065137.2332953-3-Delphine_CC_Chiu@wiwynn.com \ --to=delphine_cc_chiu@wiwynn.com \ --cc=andrew@aj.id.au \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=joel@jms.id.au \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=linux-kernel@vger.kernel.org \ --cc=patrick@stwcx.xyz \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.