From: Adrien Thierry <athierry@redhat.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Shazad Hussain <quic_shazhuss@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Adrien Thierry <athierry@redhat.com>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [PATCH v2 2/2] phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
Date: Mon, 28 Aug 2023 11:23:51 -0400 [thread overview]
Message-ID: <20230828152353.16529-3-athierry@redhat.com> (raw)
In-Reply-To: <20230828152353.16529-1-athierry@redhat.com>
For sc8280xp and sa8775p, PCS and PCS_USB initialization data is
described in the same table, thus the pcs_usb offset is not being
applied during initialization of PCS_USB registers. Fix this by adding
the appropriate pcs_usb_tbl tables.
Fixes: 8bd2d6e11c99 ("phy: qcom-qmp: Add SA8775P USB3 UNI phy")
Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index f9cb60f12575..575329004b90 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1480,8 +1480,6 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0xaa),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCS_TX_RX_CONFIG, 0x0c),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_CDR_RESET_TIME, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -1490,6 +1488,11 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21),
};
+static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+};
+
static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG1, 0xc4),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG2, 0x89),
@@ -1499,9 +1502,6 @@ static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0xaa),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCS_TX_RX_CONFIG, 0x0c),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1, 0x6f),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_CDR_RESET_TIME, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -1510,6 +1510,12 @@ static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21),
};
+static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1, 0x6f),
+};
+
struct qmp_usb_offsets {
u16 serdes;
u16 pcs;
@@ -1788,6 +1794,8 @@ static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_rx_tbl),
.pcs_tbl = sa8775p_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sa8775p_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = qcm2290_usb3phy_reset_l,
@@ -1833,6 +1841,8 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_rx_tbl),
.pcs_tbl = sc8280xp_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sc8280xp_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = qcm2290_usb3phy_reset_l,
--
2.41.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Adrien Thierry <athierry@redhat.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Shazad Hussain <quic_shazhuss@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Adrien Thierry <athierry@redhat.com>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [PATCH v2 2/2] phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
Date: Mon, 28 Aug 2023 11:23:51 -0400 [thread overview]
Message-ID: <20230828152353.16529-3-athierry@redhat.com> (raw)
In-Reply-To: <20230828152353.16529-1-athierry@redhat.com>
For sc8280xp and sa8775p, PCS and PCS_USB initialization data is
described in the same table, thus the pcs_usb offset is not being
applied during initialization of PCS_USB registers. Fix this by adding
the appropriate pcs_usb_tbl tables.
Fixes: 8bd2d6e11c99 ("phy: qcom-qmp: Add SA8775P USB3 UNI phy")
Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Adrien Thierry <athierry@redhat.com>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index f9cb60f12575..575329004b90 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1480,8 +1480,6 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0xaa),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCS_TX_RX_CONFIG, 0x0c),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_CDR_RESET_TIME, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -1490,6 +1488,11 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21),
};
+static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+};
+
static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG1, 0xc4),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG2, 0x89),
@@ -1499,9 +1502,6 @@ static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0xaa),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCS_TX_RX_CONFIG, 0x0c),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1, 0x6f),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_CDR_RESET_TIME, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -1510,6 +1510,12 @@ static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21),
};
+static const struct qmp_phy_init_tbl sa8775p_usb3_uniphy_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1, 0x6f),
+};
+
struct qmp_usb_offsets {
u16 serdes;
u16 pcs;
@@ -1788,6 +1794,8 @@ static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_rx_tbl),
.pcs_tbl = sa8775p_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sa8775p_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sa8775p_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = qcm2290_usb3phy_reset_l,
@@ -1833,6 +1841,8 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_rx_tbl),
.pcs_tbl = sc8280xp_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sc8280xp_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = qcm2290_usb3phy_reset_l,
--
2.41.0
next prev parent reply other threads:[~2023-08-28 15:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-28 15:23 [PATCH v2 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB Adrien Thierry
2023-08-28 15:23 ` Adrien Thierry
2023-08-28 15:23 ` [PATCH v2 1/2] phy: qcom-qmp-usb: initialize PCS_USB registers Adrien Thierry
2023-08-28 15:23 ` Adrien Thierry
2023-08-28 15:44 ` Dmitry Baryshkov
2023-08-28 15:44 ` Dmitry Baryshkov
2023-08-28 19:07 ` Konrad Dybcio
2023-08-28 19:07 ` Konrad Dybcio
2023-08-28 15:23 ` Adrien Thierry [this message]
2023-08-28 15:23 ` [PATCH v2 2/2] phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p Adrien Thierry
2023-09-14 20:48 ` [PATCH v2 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB Adrien Thierry
2023-09-14 20:48 ` Adrien Thierry
2023-09-21 14:26 ` Vinod Koul
2023-09-21 14:26 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230828152353.16529-3-athierry@redhat.com \
--to=athierry@redhat.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=quic_shazhuss@quicinc.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.