From: Adam Ford <aford173@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 1/4] arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card Date: Thu, 31 Aug 2023 06:51:25 -0500 [thread overview] Message-ID: <20230831115128.254226-1-aford173@gmail.com> (raw) Instead of using a custom glue layer connecting the wm8962 CODEC to the SAI3 sound-dai, migrate the sound card to simple-audio-card. This also brings this board in line with the imx8mn-beacon and imx8mp-beacon. Signed-off-by: Adam Ford <aford173@gmail.com> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index b10e2a703a44..313e93663d6f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -98,18 +98,30 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; - sound { - compatible = "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - audio-cpu = <&sai3>; - audio-codec = <&wm8962>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; + sound-wm8962 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8962"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8962>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + frame-master; + bitclock-master; + }; }; }; @@ -192,6 +204,7 @@ wm8962: audio-codec@1a { 0x0000 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; + #sound-dai-cells = <0>; }; pca6416_0: gpio@20 { -- 2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Adam Ford <aford173@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 1/4] arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card Date: Thu, 31 Aug 2023 06:51:25 -0500 [thread overview] Message-ID: <20230831115128.254226-1-aford173@gmail.com> (raw) Instead of using a custom glue layer connecting the wm8962 CODEC to the SAI3 sound-dai, migrate the sound card to simple-audio-card. This also brings this board in line with the imx8mn-beacon and imx8mp-beacon. Signed-off-by: Adam Ford <aford173@gmail.com> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index b10e2a703a44..313e93663d6f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -98,18 +98,30 @@ reg_usdhc2_vmmc: regulator-usdhc2 { enable-active-high; }; - sound { - compatible = "fsl,imx-audio-wm8962"; - model = "wm8962-audio"; - audio-cpu = <&sai3>; - audio-codec = <&wm8962>; - audio-routing = - "Headphone Jack", "HPOUTL", - "Headphone Jack", "HPOUTR", - "Ext Spk", "SPKOUTL", - "Ext Spk", "SPKOUTR", - "AMIC", "MICBIAS", - "IN3R", "AMIC"; + sound-wm8962 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8962"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = "Headphone", "Headphones", + "Microphone", "Headset Mic", + "Speaker", "Speaker"; + simple-audio-card,routing = "Headphones", "HPOUTL", + "Headphones", "HPOUTR", + "Speaker", "SPKOUTL", + "Speaker", "SPKOUTR", + "Headset Mic", "MICBIAS", + "IN3R", "Headset Mic"; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8962>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + frame-master; + bitclock-master; + }; }; }; @@ -192,6 +204,7 @@ wm8962: audio-codec@1a { 0x0000 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; + #sound-dai-cells = <0>; }; pca6416_0: gpio@20 { -- 2.39.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-08-31 11:51 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-08-31 11:51 Adam Ford [this message] 2023-08-31 11:51 ` [PATCH 1/4] arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card Adam Ford 2023-08-31 11:51 ` [PATCH 2/4] arm64: dts: imx8mm-beacon: Add DMIC support Adam Ford 2023-08-31 11:51 ` Adam Ford 2023-09-25 1:14 ` Shawn Guo 2023-09-25 1:14 ` Shawn Guo 2023-08-31 11:51 ` [PATCH 3/4] arm64: dts: imx8mn-beacon: " Adam Ford 2023-08-31 11:51 ` Adam Ford 2023-08-31 11:51 ` [PATCH 4/4] arm64: dts: imx8mp-beacon: " Adam Ford 2023-08-31 11:51 ` Adam Ford 2023-08-31 12:34 ` Adam Ford 2023-08-31 12:34 ` Adam Ford 2023-08-31 23:13 ` kernel test robot 2023-08-31 23:13 ` kernel test robot
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230831115128.254226-1-aford173@gmail.com \ --to=aford173@gmail.com \ --cc=aford@beaconembedded.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.