[PATCH v3 2/3] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property

[Robert Marko <robimarko@gmail.com>]

From: Christian Marangi <ansuelsmth@gmail.com>

Document named opp-microvolt property for opp-v2-kryo-cpu schema.
This property is used to declare multiple voltage ranges selected on the
different values read from efuses. The selection is done based on the
speed pvs values and the named opp-microvolt property is selected by the
qcom-cpufreq-nvmem driver.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 .../bindings/opp/opp-v2-kryo-cpu.yaml         | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
index bbbad31ae4ca..6f216306a7eb 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -63,6 +63,12 @@ patternProperties:
           5:  MSM8996SG, speedbin 1
           6:  MSM8996SG, speedbin 2
           7-31:  unused
+
+          Bitmap for IPQ806X SoC:
+          0:  IPQ8062
+          1:  IPQ8064/IPQ8066/IPQ8068
+          2:  IPQ8065/IPQ8069
+          3-31:  unused
         enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
                0x9, 0xd, 0xe, 0xf,
                0x10, 0x20, 0x30, 0x70]
@@ -71,6 +77,24 @@ patternProperties:
 
       required-opps: true
 
+    patternProperties:
+      '^opp-microvolt-speed[0-9]+-pvs[0-9]+$':
+        description: |
+          Named opp-microvolt property following the same generic
+          binding for named opp-microvolt.
+
+          The correct voltage range is selected based on the values
+          in the efuse for the speed and the pvs.
+
+          The qcom-cpufreq-nvmem driver will read all these values
+          and assign the correct named property.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
     required:
       - opp-hz
 
@@ -256,6 +280,22 @@ examples:
             };
         };
 
+        /* Dummy opp table to give example for named opp-microvolt */
+        opp-table-2 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+
+            opp-384000000 {
+                opp-hz = /bits/ 64 <384000000>;
+                opp-microvolt-speed0-pvs0 = <1000000 950000 1050000>;
+                opp-microvolt-speed0-pvs1 = <925000 878750 971250>;
+                opp-microvolt-speed0-pvs2 = <875000 831250 918750>;
+                opp-microvolt-speed0-pvs3 = <800000 760000 840000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <100000>;
+            };
+        };
+
         smem {
             compatible = "qcom,smem";
             memory-region = <&smem_mem>;
-- 
2.41.0