All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-input@vger.kernel.org
Subject: [PATCH v6 29/36] ARM: dts: qcom: mdm9615: move RPM regulators to board files
Date: Thu, 28 Sep 2023 14:03:02 +0300	[thread overview]
Message-ID: <20230928110309.1212221-30-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230928110309.1212221-1-dmitry.baryshkov@linaro.org>

The set of regulators available over the RPM requests is not a property
of the SoC. Move them to board files.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../boot/dts/qcom/qcom-mdm9615-wp8548.dtsi    | 136 ++++++++++++++++++
 arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi      | 134 -----------------
 2 files changed, 136 insertions(+), 134 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index 27c3d92d9452..0dd52cac0e2e 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -134,6 +134,142 @@ &gsbi5_serial {
 	pinctrl-names = "default";
 };
 
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8018-regulators";
+
+		vin_lvs1-supply = <&pm8018_s3>;
+
+		vdd_l7-supply = <&pm8018_s4>;
+		vdd_l8-supply = <&pm8018_s3>;
+		vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+		/* Buck SMPS */
+		pm8018_s1: s1 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s2: s2 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s3: s3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s4: s4 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s5: s5 {
+			regulator-always-on;
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8018_l2: l2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l3: l3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l4: l4 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8018_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8018_l8: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8018_l9: l9 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8018_l10: l10 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l11: l11 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l13: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8018_l14: l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8018_lvs1: lvs1 {
+			bias-pull-down;
+		};
+	};
+};
+
 &sdcc1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index e23ca6c42683..07e712e890f6 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -338,140 +338,6 @@ rpm: rpm@108000 {
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8018-regulators";
-
-				vin_lvs1-supply = <&pm8018_s3>;
-
-				vdd_l7-supply = <&pm8018_s4>;
-				vdd_l8-supply = <&pm8018_s3>;
-				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
-				/* Buck SMPS */
-				pm8018_s1: s1 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s2: s2 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s3: s3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s4: s4 {
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s5: s5 {
-					regulator-always-on;
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8018_l2: l2 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l3: l3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l4: l4 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				pm8018_l5: l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l6: l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l7: l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8018_l8: l8 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8018_l9: l9 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8018_l10: l10 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l11: l11 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l12: l12 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l13: l13 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8018_l14: l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8018_lvs1: lvs1 {
-					bias-pull-down;
-				};
-			};
 		};
 	};
 };
-- 
2.39.2


  parent reply	other threads:[~2023-09-28 11:04 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-28 11:02 [PATCH v6 00/36] ARM: dts: qcom: cleanup PMIC usage Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 01/36] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format Dmitry Baryshkov
2023-10-30 20:04   ` Rob Herring
2023-09-28 11:02 ` [PATCH v6 02/36] ARM: dts: qcom: apq8064: correct XOADC register address Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 03/36] ARM: dts: qcom: msm8960: introduce label for PMIC keypad Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 04/36] ARM: dts: qcom: msm8660-surf: use keypad label directly Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 05/36] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 06/36] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 07/36] ARM: dts: qcom: strip prefix from PMIC files Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 08/36] ARM: dts: qcom: apq8064: fix PMIC node labels Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 09/36] ARM: dts: qcom: mdm9615: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 10/36] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 11/36] ARM: dts: qcom: msm8960: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 12/36] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 13/36] ARM: dts: qcom: mdm9615: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 14/36] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 15/36] ARM: dts: qcom: msm8960: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 16/36] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 17/36] ARM: dts: qcom: apq8064: split PMICs " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 18/36] ARM: dts: qcom: mdm9615: split PMIC " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 19/36] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 20/36] ARM: dts: qcom: pm8058: reorder nodes Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 21/36] ARM: dts: qcom: pm8921: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 22/36] ARM: dts: qcom: pm8018: move reg property Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 23/36] ARM: dts: qcom: pm8921: " Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 24/36] ARM: dts: qcom: pm8058: use defined IRQ flags Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 25/36] ARM: dts: qcom: pm8921: switch to interrupts-extended Dmitry Baryshkov
2023-09-28 11:02 ` [PATCH v6 26/36] ARM: dts: qcom: pm8018: " Dmitry Baryshkov
2023-09-28 11:03 ` [PATCH v6 27/36] ARM: dts: qcom: pm8058: " Dmitry Baryshkov
2023-09-28 11:03 ` [PATCH v6 28/36] ARM: dts: qcom: apq8064: move RPM regulators to board files Dmitry Baryshkov
2023-09-28 11:03 ` Dmitry Baryshkov [this message]
2023-09-28 11:03 ` [PATCH v6 30/36] ARM: dts: qcom: msm8660: " Dmitry Baryshkov
2023-09-28 11:03 ` [PATCH v6 31/36] ARM: dts: qcom: msm8960: drop useless rpm regulators node Dmitry Baryshkov
2023-09-28 11:03 ` [PATCH v6 32/36] ARM: dts: qcom: msm8974: move regulators to board files Dmitry Baryshkov
2023-09-28 11:03 ` [PATCH v6 33/36] ARM: dts: qcom: pm8921: Disable keypad by default Dmitry Baryshkov
2023-09-28 11:03 ` [PATCH v6 34/36] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel Dmitry Baryshkov
2023-09-28 11:03 ` [PATCH v6 35/36] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name Dmitry Baryshkov
2023-09-28 13:49   ` Konrad Dybcio
2023-09-28 11:03 ` [PATCH v6 36/36] ARM: dts: qcom: mdm9615: " Dmitry Baryshkov
2023-09-28 13:50   ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230928110309.1212221-30-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.