All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhengping Jiang <jiangzp@google.com>
To: linux-bluetooth@vger.kernel.org, marcel@holtmann.org,
	luiz.dentz@gmail.com
Cc: chromeos-bluetooth-upstreaming@chromium.org,
	Zhengping Jiang <jiangzp@google.com>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org
Subject: [kernel PATCH v1] btmtksdio: enable bluetooth wakeup in system suspend
Date: Wed, 11 Oct 2023 14:16:31 -0700	[thread overview]
Message-ID: <20231011141631.kernel.v1.1.I6dbfc1fedddf0633b55ce7e7a10ef7f3929a9bdc@changeid> (raw)

The BTMTKSDIO_BT_WAKE_ENABLED flag is set for bluetooth interrupt
during system suspend and increases wakeup count for bluetooth event.

Signed-off-by: Zhengping Jiang <jiangzp@google.com>
---

Changes in v1:
- Add BTMTKSDIO_BT_WAKE_ENABLED flag
- Call pm_wakeup_event in btmtksdio_interrupt

 drivers/bluetooth/btmtksdio.c | 36 +++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index f9a3444753c2..ddc04ce5c6d4 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -118,6 +118,7 @@ MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
 #define BTMTKSDIO_FUNC_ENABLED		3
 #define BTMTKSDIO_PATCH_ENABLED		4
 #define BTMTKSDIO_HW_RESET_ACTIVE	5
+#define BTMTKSDIO_BT_WAKE_ENABLED	6
 
 struct mtkbtsdio_hdr {
 	__le16	len;
@@ -620,6 +621,12 @@ static void btmtksdio_interrupt(struct sdio_func *func)
 {
 	struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
 
+	if (test_bit(BTMTKSDIO_BT_WAKE_ENABLED, &bdev->tx_state)) {
+		if (bdev->hdev->suspended)
+			pm_wakeup_event(bdev->dev, 0);
+		clear_bit(BTMTKSDIO_BT_WAKE_ENABLED, &bdev->tx_state);
+	}
+
 	/* Disable interrupt */
 	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
 
@@ -1454,6 +1461,23 @@ static int btmtksdio_runtime_suspend(struct device *dev)
 	return err;
 }
 
+static int btmtksdio_system_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmtksdio_dev *bdev;
+
+	bdev = sdio_get_drvdata(func);
+	if (!bdev)
+		return 0;
+
+	if (!test_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state))
+		return 0;
+
+	set_bit(BTMTKSDIO_BT_WAKE_ENABLED, &bdev->tx_state);
+
+	return btmtksdio_runtime_suspend(dev);
+}
+
 static int btmtksdio_runtime_resume(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
@@ -1474,8 +1498,16 @@ static int btmtksdio_runtime_resume(struct device *dev)
 	return err;
 }
 
-static UNIVERSAL_DEV_PM_OPS(btmtksdio_pm_ops, btmtksdio_runtime_suspend,
-			    btmtksdio_runtime_resume, NULL);
+static int btmtksdio_system_resume(struct device *dev)
+{
+	return btmtksdio_runtime_resume(dev);
+}
+
+const struct dev_pm_ops __maybe_unused btmtksdio_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(btmtksdio_system_suspend, btmtksdio_system_resume)
+	SET_RUNTIME_PM_OPS(btmtksdio_runtime_suspend, btmtksdio_runtime_resume, NULL)
+};
+
 #define BTMTKSDIO_PM_OPS (&btmtksdio_pm_ops)
 #else	/* CONFIG_PM */
 #define BTMTKSDIO_PM_OPS NULL
-- 
2.42.0.609.gbb76f46606-goog


WARNING: multiple messages have this Message-ID (diff)
From: Zhengping Jiang <jiangzp@google.com>
To: linux-bluetooth@vger.kernel.org, marcel@holtmann.org,
	luiz.dentz@gmail.com
Cc: chromeos-bluetooth-upstreaming@chromium.org,
	 Zhengping Jiang <jiangzp@google.com>,
	 AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	 Johan Hedberg <johan.hedberg@gmail.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	 linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	 linux-mediatek@lists.infradead.org
Subject: [kernel PATCH v1] btmtksdio: enable bluetooth wakeup in system suspend
Date: Wed, 11 Oct 2023 14:16:31 -0700	[thread overview]
Message-ID: <20231011141631.kernel.v1.1.I6dbfc1fedddf0633b55ce7e7a10ef7f3929a9bdc@changeid> (raw)

The BTMTKSDIO_BT_WAKE_ENABLED flag is set for bluetooth interrupt
during system suspend and increases wakeup count for bluetooth event.

Signed-off-by: Zhengping Jiang <jiangzp@google.com>
---

Changes in v1:
- Add BTMTKSDIO_BT_WAKE_ENABLED flag
- Call pm_wakeup_event in btmtksdio_interrupt

 drivers/bluetooth/btmtksdio.c | 36 +++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index f9a3444753c2..ddc04ce5c6d4 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -118,6 +118,7 @@ MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
 #define BTMTKSDIO_FUNC_ENABLED		3
 #define BTMTKSDIO_PATCH_ENABLED		4
 #define BTMTKSDIO_HW_RESET_ACTIVE	5
+#define BTMTKSDIO_BT_WAKE_ENABLED	6
 
 struct mtkbtsdio_hdr {
 	__le16	len;
@@ -620,6 +621,12 @@ static void btmtksdio_interrupt(struct sdio_func *func)
 {
 	struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
 
+	if (test_bit(BTMTKSDIO_BT_WAKE_ENABLED, &bdev->tx_state)) {
+		if (bdev->hdev->suspended)
+			pm_wakeup_event(bdev->dev, 0);
+		clear_bit(BTMTKSDIO_BT_WAKE_ENABLED, &bdev->tx_state);
+	}
+
 	/* Disable interrupt */
 	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
 
@@ -1454,6 +1461,23 @@ static int btmtksdio_runtime_suspend(struct device *dev)
 	return err;
 }
 
+static int btmtksdio_system_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmtksdio_dev *bdev;
+
+	bdev = sdio_get_drvdata(func);
+	if (!bdev)
+		return 0;
+
+	if (!test_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state))
+		return 0;
+
+	set_bit(BTMTKSDIO_BT_WAKE_ENABLED, &bdev->tx_state);
+
+	return btmtksdio_runtime_suspend(dev);
+}
+
 static int btmtksdio_runtime_resume(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
@@ -1474,8 +1498,16 @@ static int btmtksdio_runtime_resume(struct device *dev)
 	return err;
 }
 
-static UNIVERSAL_DEV_PM_OPS(btmtksdio_pm_ops, btmtksdio_runtime_suspend,
-			    btmtksdio_runtime_resume, NULL);
+static int btmtksdio_system_resume(struct device *dev)
+{
+	return btmtksdio_runtime_resume(dev);
+}
+
+const struct dev_pm_ops __maybe_unused btmtksdio_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(btmtksdio_system_suspend, btmtksdio_system_resume)
+	SET_RUNTIME_PM_OPS(btmtksdio_runtime_suspend, btmtksdio_runtime_resume, NULL)
+};
+
 #define BTMTKSDIO_PM_OPS (&btmtksdio_pm_ops)
 #else	/* CONFIG_PM */
 #define BTMTKSDIO_PM_OPS NULL
-- 
2.42.0.609.gbb76f46606-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-10-11 21:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-11 21:16 Zhengping Jiang [this message]
2023-10-11 21:16 ` [kernel PATCH v1] btmtksdio: enable bluetooth wakeup in system suspend Zhengping Jiang
2023-10-11 22:02 ` [kernel,v1] " bluez.test.bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231011141631.kernel.v1.1.I6dbfc1fedddf0633b55ce7e7a10ef7f3929a9bdc@changeid \
    --to=jiangzp@google.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=chromeos-bluetooth-upstreaming@chromium.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=matthias.bgg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.