From: Marcel Ziswiler <marcel@ziswiler.com>
To: linux-bluetooth@vger.kernel.org
Cc: "Sherry Sun" <sherry.sun@nxp.com>,
"Johan Hedberg" <johan.hedberg@gmail.com>,
"Luiz Augusto von Dentz" <luiz.dentz@gmail.com>,
"Neeraj Sanjay Kale" <neeraj.sanjaykale@nxp.com>,
linux-kernel@vger.kernel.org,
"Marcel Holtmann" <marcel@holtmann.org>,
"Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Amitkumar Karwar" <amitkumar.karwar@nxp.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v1 1/2] Bluetooth: btnxpuart: Fix btnxpuart_close
Date: Wed, 18 Oct 2023 16:55:39 +0200 [thread overview]
Message-ID: <20231018145540.34014-2-marcel@ziswiler.com> (raw)
In-Reply-To: <20231018145540.34014-1-marcel@ziswiler.com>
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Unfortunately, btnxpuart_close() may trigger a BUG: scheduling while
atomic. Fix this by properly purging the transmit queue and freeing the
receive skb.
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
This is the kernel trace this commit fixes:
[ 29.270685] BUG: scheduling while atomic: kworker/u3:0/55/0x00000002
[ 29.277062] Modules linked in: snd_soc_simple_card snd_soc_simple_card_utils crct10dif_ce btnxpuart usb_f_ncm u_ether rtc_ti_k3 k3_j72xx_bandgap mwifiex_sdio mwifiex snd_soc_davinci_mcasp snd_soc_ti_udma sa2ul snd_soc_ti_edma snd_soc_ti_sdma authenc ina2xx snd_soc_nau8822 tps65219_pwrbutton at24 ti_ads1015 industrialio_triggered_buffer kfifo_buf lm75 rtc_ds1307 spi_omap2_mcspi 8021q garp mrp stp llc cfg80211 bluetooth ecdh_generic ecc rfkill libcomposite fuse drm backlight ipv6
[ 29.319532] CPU: 0 PID: 55 Comm: kworker/u3:0 Not tainted 6.6.0-rc5-next-20231010-dirty #35
[ 29.327883] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[ 29.335450] Workqueue: hci0 hci_power_off [bluetooth]
[ 29.340775] Call trace:
[ 29.343220] dump_backtrace+0x98/0x118
[ 29.346984] show_stack+0x18/0x24
[ 29.350303] dump_stack_lvl+0x48/0x60
[ 29.353971] dump_stack+0x18/0x24
[ 29.357287] __schedule_bug+0x50/0x68
[ 29.360953] __schedule+0x7f0/0xa94
[ 29.364446] schedule+0x34/0xc8
[ 29.367588] rpm_resume+0x170/0x6c8
[ 29.371083] __pm_runtime_resume+0x4c/0x90
[ 29.375182] omap8250_set_mctrl+0x2c/0xbc
[ 29.379198] serial8250_set_mctrl+0x20/0x40
[ 29.383387] uart_update_mctrl+0x58/0x78
[ 29.387311] uart_dtr_rts+0x104/0x114
[ 29.390975] tty_port_shutdown+0xd4/0xdc
[ 29.394903] tty_port_close+0x40/0xbc
[ 29.398567] uart_close+0x34/0x9c
[ 29.401882] ttyport_close+0x50/0x94
[ 29.405460] serdev_device_close+0x40/0x50
[ 29.409557] btnxpuart_close+0x48/0xbc [btnxpuart]
[ 29.414364] hci_dev_close_sync+0x2ec/0x754 [bluetooth]
[ 29.419747] hci_dev_do_close+0x2c/0x70 [bluetooth]
[ 29.424772] hci_power_off+0x20/0x64 [bluetooth]
[ 29.429536] process_one_work+0x138/0x244
[ 29.433551] worker_thread+0x320/0x438
[ 29.437302] kthread+0x114/0x118
[ 29.440533] ret_from_fork+0x10/0x20
[ 29.445838] BUG: scheduling while atomic: kworker/u3:0/55/0x00000000
[ 29.453556] Modules linked in: snd_soc_simple_card snd_soc_simple_card_utils crct10dif_ce btnxpuart usb_f_ncm u_ether rtc_ti_k3 k3_j72xx_bandgap mwifiex_sdio mwifiex snd_soc_davinci_mcasp snd_soc_ti_udma sa2ul snd_soc_ti_edma snd_soc_ti_sdma authenc ina2xx snd_soc_nau8822 tps65219_pwrbutton at24 ti_ads1015 industrialio_triggered_buffer kfifo_buf lm75 rtc_ds1307 spi_omap2_mcspi 8021q garp mrp stp llc cfg80211 bluetooth ecdh_generic ecc rfkill libcomposite fuse drm backlight ipv6
[ 29.496085] CPU: 0 PID: 55 Comm: kworker/u3:0 Tainted: G W 6.6.0-rc5-next-20231010-dirty #35
[ 29.505912] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[ 29.513478] Workqueue: hci0 hci_power_off [bluetooth]
[ 29.518787] Call trace:
[ 29.521232] dump_backtrace+0x98/0x118
[ 29.524993] show_stack+0x18/0x24
[ 29.528312] dump_stack_lvl+0x48/0x60
[ 29.531980] dump_stack+0x18/0x24
[ 29.535296] __schedule_bug+0x50/0x68
[ 29.538961] __schedule+0x7f0/0xa94
[ 29.542452] schedule+0x34/0xc8
[ 29.545593] rpm_resume+0x170/0x6c8
[ 29.549087] __pm_runtime_resume+0x4c/0x90
[ 29.553186] omap_8250_pm+0x28/0x110
[ 29.556766] serial8250_pm+0x18/0x3c
[ 29.560347] uart_tty_port_shutdown+0xa4/0x114
[ 29.564792] tty_port_shutdown+0x84/0xdc
[ 29.568718] tty_port_close+0x40/0xbc
[ 29.572382] uart_close+0x34/0x9c
[ 29.575697] ttyport_close+0x50/0x94
[ 29.579275] serdev_device_close+0x40/0x50
[ 29.583373] btnxpuart_close+0x48/0xbc [btnxpuart]
[ 29.588179] hci_dev_close_sync+0x2ec/0x754 [bluetooth]
[ 29.593562] hci_dev_do_close+0x2c/0x70 [bluetooth]
[ 29.598587] hci_power_off+0x20/0x64 [bluetooth]
[ 29.603353] process_one_work+0x138/0x244
[ 29.607369] worker_thread+0x320/0x438
[ 29.611119] kthread+0x114/0x118
[ 29.614352] ret_from_fork+0x10/0x20
drivers/bluetooth/btnxpuart.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index b7e66b7ac570..9cb7529eef09 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -1234,6 +1234,9 @@ static int btnxpuart_close(struct hci_dev *hdev)
ps_wakeup(nxpdev);
serdev_device_close(nxpdev->serdev);
+ skb_queue_purge(&nxpdev->txq);
+ kfree_skb(nxpdev->rx_skb);
+ nxpdev->rx_skb = NULL;
clear_bit(BTNXPUART_SERDEV_OPEN, &nxpdev->tx_state);
return 0;
}
--
2.36.1
next prev parent reply other threads:[~2023-10-18 14:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 14:55 [PATCH v1 0/2] Bluetooth: btnxpuart: Fixes Marcel Ziswiler
2023-10-18 14:55 ` Marcel Ziswiler [this message]
2023-10-18 15:36 ` [PATCH v1 1/2] Bluetooth: btnxpuart: Fix btnxpuart_close Neeraj sanjay kale
2023-10-18 16:23 ` Marcel Ziswiler
2023-10-19 9:41 ` Neeraj sanjay kale
2023-10-18 15:42 ` Bluetooth: btnxpuart: Fixes bluez.test.bot
2023-11-24 20:26 ` [PATCH v1 1/2] Bluetooth: btnxpuart: Fix btnxpuart_close Francesco Dolcini
2024-03-04 16:52 ` Francesco Dolcini
2024-03-04 17:34 ` Luiz Augusto von Dentz
2023-10-18 14:55 ` [PATCH v1 2/2] Bluetooth: btnxpuart: Fix nxp_setup Marcel Ziswiler
2023-10-18 15:28 ` Neeraj sanjay kale
2023-10-18 16:41 ` Marcel Ziswiler
2023-10-19 9:58 ` Neeraj sanjay kale
2024-01-17 5:18 ` Neeraj Sanjay Kale
2023-10-19 16:44 ` Paul Menzel
2023-10-20 7:56 ` Marcel Ziswiler
2023-10-20 10:39 ` Sherry Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018145540.34014-2-marcel@ziswiler.com \
--to=marcel@ziswiler.com \
--cc=amitkumar.karwar@nxp.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel.ziswiler@toradex.com \
--cc=marcel@holtmann.org \
--cc=neeraj.sanjaykale@nxp.com \
--cc=sherry.sun@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.