From: Frank Li <Frank.Li@nxp.com> To: miquel.raynal@bootlin.com Cc: Frank.Li@nxp.com, alexandre.belloni@bootlin.com, conor.culhane@silvaco.com, imx@lists.linux.dev, joe@perches.com, linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 1/6] master reduce clock Date: Wed, 18 Oct 2023 11:48:04 -0400 [thread overview] Message-ID: <20231018154809.3304558-2-Frank.Li@nxp.com> (raw) In-Reply-To: <20231018154809.3304558-1-Frank.Li@nxp.com> --- drivers/i3c/master/svc-i3c-master.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c index e307ba2b965e6..d29de5fe533e6 100644 --- a/drivers/i3c/master/svc-i3c-master.c +++ b/drivers/i3c/master/svc-i3c-master.c @@ -511,7 +511,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) * Using I3C Push-Pull mode, target is 12.5MHz/80ns period. * Simplest configuration is using a 50% duty-cycle of 40ns. */ - ppbaud = DIV_ROUND_UP(40, fclk_period_ns) - 1; + ppbaud = DIV_ROUND_UP(500, fclk_period_ns) - 1; pplow = 0; /* @@ -521,7 +521,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) */ odhpp = 1; high_period_ns = (ppbaud + 1) * fclk_period_ns; - odbaud = DIV_ROUND_UP(240 - high_period_ns, high_period_ns) - 1; + odbaud = DIV_ROUND_UP(540 - high_period_ns, high_period_ns) - 1; od_low_period_ns = (odbaud + 1) * high_period_ns; switch (bus->mode) { -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Frank Li <Frank.Li@nxp.com> To: miquel.raynal@bootlin.com Cc: Frank.Li@nxp.com, alexandre.belloni@bootlin.com, conor.culhane@silvaco.com, imx@lists.linux.dev, joe@perches.com, linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 1/6] master reduce clock Date: Wed, 18 Oct 2023 11:48:04 -0400 [thread overview] Message-ID: <20231018154809.3304558-2-Frank.Li@nxp.com> (raw) In-Reply-To: <20231018154809.3304558-1-Frank.Li@nxp.com> --- drivers/i3c/master/svc-i3c-master.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c index e307ba2b965e6..d29de5fe533e6 100644 --- a/drivers/i3c/master/svc-i3c-master.c +++ b/drivers/i3c/master/svc-i3c-master.c @@ -511,7 +511,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) * Using I3C Push-Pull mode, target is 12.5MHz/80ns period. * Simplest configuration is using a 50% duty-cycle of 40ns. */ - ppbaud = DIV_ROUND_UP(40, fclk_period_ns) - 1; + ppbaud = DIV_ROUND_UP(500, fclk_period_ns) - 1; pplow = 0; /* @@ -521,7 +521,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m) */ odhpp = 1; high_period_ns = (ppbaud + 1) * fclk_period_ns; - odbaud = DIV_ROUND_UP(240 - high_period_ns, high_period_ns) - 1; + odbaud = DIV_ROUND_UP(540 - high_period_ns, high_period_ns) - 1; od_low_period_ns = (odbaud + 1) * high_period_ns; switch (bus->mode) { -- 2.34.1 -- linux-i3c mailing list linux-i3c@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2023-10-18 15:48 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-10-18 15:48 [PATCH v2 0/6] i3c: master: svc: collection of bugs fixes Frank Li 2023-10-18 15:48 ` Frank Li 2023-10-18 15:48 ` Frank Li [this message] 2023-10-18 15:48 ` [PATCH v2 1/6] master reduce clock Frank Li 2023-10-18 15:48 ` [PATCH v2 2/6] i3c: master: svc: fix race condition in ibi work thread Frank Li 2023-10-18 15:48 ` Frank Li 2023-10-18 15:48 ` [PATCH v2 3/6] i3c: master: svc: fix wrong data return when IBI happen during start frame Frank Li 2023-10-18 15:48 ` Frank Li 2023-10-18 15:48 ` [PATCH v2 4/6] i3c: master: svc: fix ibi may not return mandatory data byte Frank Li 2023-10-18 15:48 ` Frank Li 2023-10-18 15:48 ` [PATCH v2 5/6] i3c: master: svc: fix check wrong status register in irq handler Frank Li 2023-10-18 15:48 ` Frank Li 2023-10-18 15:48 ` [PATCH v2 6/6] i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen Frank Li 2023-10-18 15:48 ` Frank Li 2023-10-18 16:03 ` [PATCH v2 0/6] i3c: master: svc: collection of bugs fixes Frank Li 2023-10-18 16:03 ` Frank Li
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231018154809.3304558-2-Frank.Li@nxp.com \ --to=frank.li@nxp.com \ --cc=alexandre.belloni@bootlin.com \ --cc=conor.culhane@silvaco.com \ --cc=imx@lists.linux.dev \ --cc=joe@perches.com \ --cc=linux-i3c@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=miquel.raynal@bootlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.