From: Alexandre Mergnat <amergnat@baylibre.com> To: "Chun-Kuang Hu" <chunkuang.hu@kernel.org>, "Philipp Zabel" <p.zabel@pengutronix.de>, "David Airlie" <airlied@gmail.com>, "Daniel Vetter" <daniel@ffwll.ch>, "Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>, "Maxime Ripard" <mripard@kernel.org>, "Thomas Zimmermann" <tzimmermann@suse.de>, "Rob Herring" <robh@kernel.org>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Conor Dooley" <conor+dt@kernel.org>, "Matthias Brugger" <matthias.bgg@gmail.com>, "AngeloGioacchino Del Regno" <angelogioacchino.delregno@collabora.com>, "Jitao Shi" <jitao.shi@mediatek.com>, "CK Hu" <ck.hu@mediatek.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Michael Turquette" <mturquette@baylibre.com>, "Stephen Boyd" <sboyd@kernel.org>, "Catalin Marinas" <catalin.marinas@arm.com>, "Will Deacon" <will@kernel.org> Cc: dri-devel@lists.freedesktop.org, linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org, linux-clk@vger.kernel.org, Alexandre Mergnat <amergnat@baylibre.com> Subject: [PATCH v2 18/18] arm64: dts: mediatek: add display support for mt8365-evk Date: Tue, 16 Apr 2024 17:53:19 +0200 [thread overview] Message-ID: <20231023-display-support-v2-18-33ce8864b227@baylibre.com> (raw) In-Reply-To: <20231023-display-support-v2-0-33ce8864b227@baylibre.com> MIPI DSI: - Add "vsys_lcm_reg" regulator support and setup the "mt6357_vsim1_reg", to power the pannel plugged to the DSI connector. - Setup the Display Parallel Interface. - Add the startek kd070fhfid015 pannel support. HDMI: - Add HDMI connector support. - Add the "ite,it66121" HDMI bridge support, driven by I2C1. - Setup the Display Parallel Interface. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 182 ++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index 50cbaefa1a99..4afdcbefc481 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -26,6 +26,18 @@ chosen { stdout-path = "serial0:921600n8"; }; + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "d"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + firmware { optee { compatible = "linaro,optee-tz"; @@ -86,6 +98,56 @@ optee_reserved: optee@43200000 { reg = <0 0x43200000 0 0x00c00000>; }; }; + + vsys_lcm_reg: regulator-vsys-lcm { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&pio 129 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vsys_lcm"; + }; +}; + +&dpi0 { + pinctrl-0 = <&dpi_default_pins>; + pinctrl-1 = <&dpi_idle_pins>; + pinctrl-names = "default", "sleep"; + status = "okay"; + + port { + dpi_out: endpoint { + remote-endpoint = <&it66121_in>; + }; + }; +}; + +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "startek,kd070fhfid015"; + status = "okay"; + reg = <0>; + enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&mt6357_vsim1_reg>; + power-supply = <&vsys_lcm_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + + port { + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &cpu0 { @@ -138,6 +200,50 @@ &i2c0 { status = "okay"; }; +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-div = <2>; + clock-frequency = <100000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + + it66121hdmitx: it66121hdmitx@4c { + #sound-dai-cells = <0>; + compatible = "ite,it66121"; + interrupt-parent = <&pio>; + interrupts = <68 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&ite_pins>; + pinctrl-names = "default"; + reg = <0x4c>; + reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>; + vcn18-supply = <&mt6357_vsim2_reg>; + vcn33-supply = <&mt6357_vibr_reg>; + vrf12-supply = <&mt6357_vrf12_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it66121_in: endpoint { + bus-width = <12>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi_connector_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + &mmc0 { assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>; assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; @@ -180,7 +286,55 @@ &mt6357_pmic { #interrupt-cells = <2>; }; +&mt6357_vsim1_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + &pio { + dpi_default_pins: dpi-default-pins { + pins { + pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>, + <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>, + <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>, + <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>, + <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>, + <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>, + <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>, + <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>, + <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>, + <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>, + <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>, + <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>, + <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>, + <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>, + <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>, + <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>; + drive-strength = <MTK_DRIVE_4mA>; + }; + }; + + dpi_idle_pins: dpi-idle-pins { + pins { + pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>, + <MT8365_PIN_1_GPIO1__FUNC_GPIO1>, + <MT8365_PIN_2_GPIO2__FUNC_GPIO2>, + <MT8365_PIN_3_GPIO3__FUNC_GPIO3>, + <MT8365_PIN_4_GPIO4__FUNC_GPIO4>, + <MT8365_PIN_5_GPIO5__FUNC_GPIO5>, + <MT8365_PIN_6_GPIO6__FUNC_GPIO6>, + <MT8365_PIN_7_GPIO7__FUNC_GPIO7>, + <MT8365_PIN_8_GPIO8__FUNC_GPIO8>, + <MT8365_PIN_9_GPIO9__FUNC_GPIO9>, + <MT8365_PIN_10_GPIO10__FUNC_GPIO10>, + <MT8365_PIN_11_GPIO11__FUNC_GPIO11>, + <MT8365_PIN_12_GPIO12__FUNC_GPIO12>, + <MT8365_PIN_13_GPIO13__FUNC_GPIO13>, + <MT8365_PIN_14_GPIO14__FUNC_GPIO14>, + <MT8365_PIN_15_GPIO15__FUNC_GPIO15>; + }; + }; + ethernet_pins: ethernet-pins { phy_reset_pins { pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>; @@ -222,6 +376,34 @@ pins { }; }; + i2c1_pins: i2c1-pins { + pins { + pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, + <MT8365_PIN_60_SCL1__FUNC_SCL1_0>; + bias-pull-up; + }; + }; + + ite_pins: ite-pins { + + irq_ite_pins { + pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>; + input-enable; + bias-pull-up; + }; + + pwr_pins { + pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>, + <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>; + output-high; + }; + + rst_ite_pins { + pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>; + output-high; + }; + }; + mmc0_default_pins: mmc0-default-pins { clk-pins { pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Mergnat <amergnat@baylibre.com> To: "Chun-Kuang Hu" <chunkuang.hu@kernel.org>, "Philipp Zabel" <p.zabel@pengutronix.de>, "David Airlie" <airlied@gmail.com>, "Daniel Vetter" <daniel@ffwll.ch>, "Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>, "Maxime Ripard" <mripard@kernel.org>, "Thomas Zimmermann" <tzimmermann@suse.de>, "Rob Herring" <robh@kernel.org>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Conor Dooley" <conor+dt@kernel.org>, "Matthias Brugger" <matthias.bgg@gmail.com>, "AngeloGioacchino Del Regno" <angelogioacchino.delregno@collabora.com>, "Jitao Shi" <jitao.shi@mediatek.com>, "CK Hu" <ck.hu@mediatek.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Michael Turquette" <mturquette@baylibre.com>, "Stephen Boyd" <sboyd@kernel.org>, "Catalin Marinas" <catalin.marinas@arm.com>, "Will Deacon" <will@kernel.org> Cc: dri-devel@lists.freedesktop.org, linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org, linux-clk@vger.kernel.org, Alexandre Mergnat <amergnat@baylibre.com> Subject: [PATCH v2 18/18] arm64: dts: mediatek: add display support for mt8365-evk Date: Tue, 16 Apr 2024 17:53:19 +0200 [thread overview] Message-ID: <20231023-display-support-v2-18-33ce8864b227@baylibre.com> (raw) In-Reply-To: <20231023-display-support-v2-0-33ce8864b227@baylibre.com> MIPI DSI: - Add "vsys_lcm_reg" regulator support and setup the "mt6357_vsim1_reg", to power the pannel plugged to the DSI connector. - Setup the Display Parallel Interface. - Add the startek kd070fhfid015 pannel support. HDMI: - Add HDMI connector support. - Add the "ite,it66121" HDMI bridge support, driven by I2C1. - Setup the Display Parallel Interface. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 182 ++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index 50cbaefa1a99..4afdcbefc481 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -26,6 +26,18 @@ chosen { stdout-path = "serial0:921600n8"; }; + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "d"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_connector_out>; + }; + }; + }; + firmware { optee { compatible = "linaro,optee-tz"; @@ -86,6 +98,56 @@ optee_reserved: optee@43200000 { reg = <0 0x43200000 0 0x00c00000>; }; }; + + vsys_lcm_reg: regulator-vsys-lcm { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&pio 129 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "vsys_lcm"; + }; +}; + +&dpi0 { + pinctrl-0 = <&dpi_default_pins>; + pinctrl-1 = <&dpi_idle_pins>; + pinctrl-names = "default", "sleep"; + status = "okay"; + + port { + dpi_out: endpoint { + remote-endpoint = <&it66121_in>; + }; + }; +}; + +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "startek,kd070fhfid015"; + status = "okay"; + reg = <0>; + enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&mt6357_vsim1_reg>; + power-supply = <&vsys_lcm_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + + port { + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &cpu0 { @@ -138,6 +200,50 @@ &i2c0 { status = "okay"; }; +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-div = <2>; + clock-frequency = <100000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + + it66121hdmitx: it66121hdmitx@4c { + #sound-dai-cells = <0>; + compatible = "ite,it66121"; + interrupt-parent = <&pio>; + interrupts = <68 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&ite_pins>; + pinctrl-names = "default"; + reg = <0x4c>; + reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>; + vcn18-supply = <&mt6357_vsim2_reg>; + vcn33-supply = <&mt6357_vibr_reg>; + vrf12-supply = <&mt6357_vrf12_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + it66121_in: endpoint { + bus-width = <12>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + hdmi_connector_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; +}; + &mmc0 { assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>; assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; @@ -180,7 +286,55 @@ &mt6357_pmic { #interrupt-cells = <2>; }; +&mt6357_vsim1_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + &pio { + dpi_default_pins: dpi-default-pins { + pins { + pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>, + <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>, + <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>, + <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>, + <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>, + <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>, + <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>, + <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>, + <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>, + <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>, + <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>, + <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>, + <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>, + <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>, + <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>, + <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>; + drive-strength = <MTK_DRIVE_4mA>; + }; + }; + + dpi_idle_pins: dpi-idle-pins { + pins { + pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>, + <MT8365_PIN_1_GPIO1__FUNC_GPIO1>, + <MT8365_PIN_2_GPIO2__FUNC_GPIO2>, + <MT8365_PIN_3_GPIO3__FUNC_GPIO3>, + <MT8365_PIN_4_GPIO4__FUNC_GPIO4>, + <MT8365_PIN_5_GPIO5__FUNC_GPIO5>, + <MT8365_PIN_6_GPIO6__FUNC_GPIO6>, + <MT8365_PIN_7_GPIO7__FUNC_GPIO7>, + <MT8365_PIN_8_GPIO8__FUNC_GPIO8>, + <MT8365_PIN_9_GPIO9__FUNC_GPIO9>, + <MT8365_PIN_10_GPIO10__FUNC_GPIO10>, + <MT8365_PIN_11_GPIO11__FUNC_GPIO11>, + <MT8365_PIN_12_GPIO12__FUNC_GPIO12>, + <MT8365_PIN_13_GPIO13__FUNC_GPIO13>, + <MT8365_PIN_14_GPIO14__FUNC_GPIO14>, + <MT8365_PIN_15_GPIO15__FUNC_GPIO15>; + }; + }; + ethernet_pins: ethernet-pins { phy_reset_pins { pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>; @@ -222,6 +376,34 @@ pins { }; }; + i2c1_pins: i2c1-pins { + pins { + pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, + <MT8365_PIN_60_SCL1__FUNC_SCL1_0>; + bias-pull-up; + }; + }; + + ite_pins: ite-pins { + + irq_ite_pins { + pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>; + input-enable; + bias-pull-up; + }; + + pwr_pins { + pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>, + <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>; + output-high; + }; + + rst_ite_pins { + pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>; + output-high; + }; + }; + mmc0_default_pins: mmc0-default-pins { clk-pins { pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-16 15:53 UTC|newest] Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-16 15:53 [PATCH v2 00/18] Add display support for the MT8365-EVK board Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-16 15:53 ` [PATCH v2 01/18] dt-bindings: display: mediatek: aal: add compatible for MT8365 SoC Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 18:43 ` Rob Herring 2024-04-17 18:43 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 02/18] dt-bindings: display: mediatek: ccorr: " Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 18:43 ` Rob Herring 2024-04-17 18:43 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 03/18] dt-bindings: display: mediatek: color: " Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 18:43 ` Rob Herring 2024-04-17 18:43 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 04/18] dt-bindings: display: mediatek: dither: " Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 18:43 ` Rob Herring 2024-04-17 18:43 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 05/18] dt-bindings: display: mediatek: dsi: " Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:21 ` AngeloGioacchino Del Regno 2024-04-17 10:21 ` AngeloGioacchino Del Regno 2024-04-17 18:44 ` Rob Herring 2024-04-17 18:44 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 06/18] dt-bindings: display: mediatek: dpi: add power-domains property amergnat 2024-04-16 15:53 ` amergnat 2024-04-17 10:15 ` AngeloGioacchino Del Regno 2024-04-17 10:15 ` AngeloGioacchino Del Regno 2024-04-17 18:44 ` Rob Herring 2024-04-17 18:44 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 07/18] dt-bindings: display: mediatek: dpi: add compatible for MT8365 Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:14 ` AngeloGioacchino Del Regno 2024-04-17 10:14 ` AngeloGioacchino Del Regno 2024-04-16 15:53 ` [PATCH v2 08/18] dt-bindings: display: mediatek: gamma: add compatible for MT8365 SoC Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 18:47 ` Rob Herring 2024-04-17 18:47 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 09/18] dt-bindings: display: mediatek: ovl: " Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 18:47 ` Rob Herring 2024-04-17 18:47 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 10/18] dt-bindings: display: mediatek: rdma: " Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 18:48 ` Rob Herring 2024-04-17 18:48 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 11/18] dt-bindings: pwm: mediatek,pwm-disp: add power-domains property Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 8:01 ` Uwe Kleine-König 2024-04-17 8:01 ` Uwe Kleine-König 2024-04-17 8:06 ` Alexandre Mergnat 2024-04-17 8:06 ` Alexandre Mergnat 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 10:19 ` AngeloGioacchino Del Regno 2024-04-17 13:25 ` Uwe Kleine-König 2024-04-17 13:25 ` Uwe Kleine-König 2024-04-17 13:50 ` AngeloGioacchino Del Regno 2024-04-17 13:50 ` AngeloGioacchino Del Regno 2024-04-16 15:53 ` [PATCH v2 12/18] dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 8:06 ` Uwe Kleine-König 2024-04-17 8:06 ` Uwe Kleine-König 2024-04-18 9:46 ` Alexandre Mergnat 2024-04-18 9:46 ` Alexandre Mergnat 2024-04-18 16:05 ` Uwe Kleine-König 2024-04-18 16:05 ` Uwe Kleine-König 2024-04-17 18:48 ` Rob Herring 2024-04-17 18:48 ` Rob Herring 2024-04-16 15:53 ` [PATCH v2 13/18] drm/mediatek: dsi: Improves the DSI lane setup robustness Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-16 15:53 ` [PATCH v2 14/18] drm/mediatek: add mt8365 dpi support Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:14 ` AngeloGioacchino Del Regno 2024-04-17 10:14 ` AngeloGioacchino Del Regno 2024-04-16 15:53 ` [PATCH v2 15/18] drm/mediatek: add MT8365 SoC support amergnat 2024-04-16 15:53 ` amergnat 2024-04-16 15:53 ` [PATCH v2 16/18] arm64: defconfig: enable display connector support Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-16 15:53 ` [PATCH v2 17/18] arm64: dts: mediatek: add display blocks support for the MT8365 SoC Alexandre Mergnat 2024-04-16 15:53 ` Alexandre Mergnat 2024-04-17 10:27 ` AngeloGioacchino Del Regno 2024-04-17 10:27 ` AngeloGioacchino Del Regno 2024-04-16 15:53 ` Alexandre Mergnat [this message] 2024-04-16 15:53 ` [PATCH v2 18/18] arm64: dts: mediatek: add display support for mt8365-evk Alexandre Mergnat 2024-04-17 10:27 ` AngeloGioacchino Del Regno 2024-04-17 10:27 ` AngeloGioacchino Del Regno 2024-04-18 13:02 ` Alexandre Mergnat 2024-04-18 13:02 ` Alexandre Mergnat 2024-04-17 7:58 ` [PATCH v2 00/18] Add display support for the MT8365-EVK board Uwe Kleine-König 2024-04-17 7:58 ` Uwe Kleine-König 2024-04-17 8:12 ` Alexandre Mergnat 2024-04-17 8:12 ` Alexandre Mergnat
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231023-display-support-v2-18-33ce8864b227@baylibre.com \ --to=amergnat@baylibre.com \ --cc=airlied@gmail.com \ --cc=angelogioacchino.delregno@collabora.com \ --cc=catalin.marinas@arm.com \ --cc=chunkuang.hu@kernel.org \ --cc=ck.hu@mediatek.com \ --cc=conor+dt@kernel.org \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jitao.shi@mediatek.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=linux-pwm@vger.kernel.org \ --cc=maarten.lankhorst@linux.intel.com \ --cc=matthias.bgg@gmail.com \ --cc=mripard@kernel.org \ --cc=mturquette@baylibre.com \ --cc=p.zabel@pengutronix.de \ --cc=robh@kernel.org \ --cc=sboyd@kernel.org \ --cc=tzimmermann@suse.de \ --cc=u.kleine-koenig@pengutronix.de \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.