From: Jonas Karlman <jonas@kwiboo.se> To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>, Mauro Carvalho Chehab <mchehab@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org> Cc: Alex Bee <knaerzche@gmail.com>, Nicolas Dufresne <nicolas.dufresne@collabora.com>, Benjamin Gaignard <benjamin.gaignard@collabora.com>, Sebastian Fricke <sebastian.fricke@collabora.com>, Christopher Obbard <chris.obbard@collabora.com>, linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se> Subject: [PATCH v3 03/10] media: rkvdec: h264: Use bytesperline and buffer height as virstride Date: Sun, 29 Oct 2023 18:34:10 +0000 [thread overview] Message-ID: <20231029183427.1781554-4-jonas@kwiboo.se> (raw) In-Reply-To: <20231029183427.1781554-1-jonas@kwiboo.se> Use bytesperline and buffer height to calculate the strides configured. This does not really change anything other than ensuring the bytesperline that is signaled to userspace matches what is configured in HW. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- v3: - Remove unnecessary yuv_virstride += drivers/staging/media/rkvdec/rkvdec-h264.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c index 4fc167b42cf0..7a1e76d423df 100644 --- a/drivers/staging/media/rkvdec/rkvdec-h264.c +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c @@ -896,9 +896,9 @@ static void config_registers(struct rkvdec_ctx *ctx, dma_addr_t rlc_addr; dma_addr_t refer_addr; u32 rlc_len; - u32 hor_virstride = 0; - u32 ver_virstride = 0; - u32 y_virstride = 0; + u32 hor_virstride; + u32 ver_virstride; + u32 y_virstride; u32 yuv_virstride = 0; u32 offset; dma_addr_t dst_addr; @@ -909,16 +909,16 @@ static void config_registers(struct rkvdec_ctx *ctx, f = &ctx->decoded_fmt; dst_fmt = &f->fmt.pix_mp; - hor_virstride = (sps->bit_depth_luma_minus8 + 8) * dst_fmt->width / 8; - ver_virstride = round_up(dst_fmt->height, 16); + hor_virstride = dst_fmt->plane_fmt[0].bytesperline; + ver_virstride = dst_fmt->height; y_virstride = hor_virstride * ver_virstride; if (sps->chroma_format_idc == 0) yuv_virstride = y_virstride; else if (sps->chroma_format_idc == 1) - yuv_virstride += y_virstride + y_virstride / 2; + yuv_virstride = y_virstride + y_virstride / 2; else if (sps->chroma_format_idc == 2) - yuv_virstride += 2 * y_virstride; + yuv_virstride = 2 * y_virstride; reg = RKVDEC_Y_HOR_VIRSTRIDE(hor_virstride / 16) | RKVDEC_UV_HOR_VIRSTRIDE(hor_virstride / 16) | -- 2.42.0 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Jonas Karlman <jonas@kwiboo.se> To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>, Mauro Carvalho Chehab <mchehab@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org> Cc: Alex Bee <knaerzche@gmail.com>, Nicolas Dufresne <nicolas.dufresne@collabora.com>, Benjamin Gaignard <benjamin.gaignard@collabora.com>, Sebastian Fricke <sebastian.fricke@collabora.com>, Christopher Obbard <chris.obbard@collabora.com>, linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se> Subject: [PATCH v3 03/10] media: rkvdec: h264: Use bytesperline and buffer height as virstride Date: Sun, 29 Oct 2023 18:34:10 +0000 [thread overview] Message-ID: <20231029183427.1781554-4-jonas@kwiboo.se> (raw) In-Reply-To: <20231029183427.1781554-1-jonas@kwiboo.se> Use bytesperline and buffer height to calculate the strides configured. This does not really change anything other than ensuring the bytesperline that is signaled to userspace matches what is configured in HW. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- v3: - Remove unnecessary yuv_virstride += drivers/staging/media/rkvdec/rkvdec-h264.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c index 4fc167b42cf0..7a1e76d423df 100644 --- a/drivers/staging/media/rkvdec/rkvdec-h264.c +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c @@ -896,9 +896,9 @@ static void config_registers(struct rkvdec_ctx *ctx, dma_addr_t rlc_addr; dma_addr_t refer_addr; u32 rlc_len; - u32 hor_virstride = 0; - u32 ver_virstride = 0; - u32 y_virstride = 0; + u32 hor_virstride; + u32 ver_virstride; + u32 y_virstride; u32 yuv_virstride = 0; u32 offset; dma_addr_t dst_addr; @@ -909,16 +909,16 @@ static void config_registers(struct rkvdec_ctx *ctx, f = &ctx->decoded_fmt; dst_fmt = &f->fmt.pix_mp; - hor_virstride = (sps->bit_depth_luma_minus8 + 8) * dst_fmt->width / 8; - ver_virstride = round_up(dst_fmt->height, 16); + hor_virstride = dst_fmt->plane_fmt[0].bytesperline; + ver_virstride = dst_fmt->height; y_virstride = hor_virstride * ver_virstride; if (sps->chroma_format_idc == 0) yuv_virstride = y_virstride; else if (sps->chroma_format_idc == 1) - yuv_virstride += y_virstride + y_virstride / 2; + yuv_virstride = y_virstride + y_virstride / 2; else if (sps->chroma_format_idc == 2) - yuv_virstride += 2 * y_virstride; + yuv_virstride = 2 * y_virstride; reg = RKVDEC_Y_HOR_VIRSTRIDE(hor_virstride / 16) | RKVDEC_UV_HOR_VIRSTRIDE(hor_virstride / 16) | -- 2.42.0
next prev parent reply other threads:[~2023-10-29 18:35 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-10-29 18:34 [PATCH v3 00/10] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 01/10] media: v4l2-common: Add helpers to calculate bytesperline and sizeimage Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 02/10] media: v4l2: Add NV15 and NV20 pixel formats Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman [this message] 2023-10-29 18:34 ` [PATCH v3 03/10] media: rkvdec: h264: Use bytesperline and buffer height as virstride Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 04/10] media: rkvdec: h264: Don't hardcode SPS/PPS parameters Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 05/10] media: rkvdec: h264: Remove SPS validation at streaming start Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 06/10] media: rkvdec: Extract rkvdec_fill_decoded_pixfmt helper method Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 07/10] media: rkvdec: Move rkvdec_reset_decoded_fmt() function Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 08/10] media: rkvdec: Prepare for adding format validation ops Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 09/10] media: rkvdec: Add get_fmt_opaque and valid_fmt ops Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-10-29 18:34 ` [PATCH v3 10/10] media: rkvdec: h264: Support High 10 and 4:2:2 profiles Jonas Karlman 2023-10-29 18:34 ` Jonas Karlman 2023-12-22 14:15 ` [PATCH v3 00/10] media: rkvdec: Add H.264 High 10 and 4:2:2 profile support Christopher Obbard 2023-12-22 14:15 ` Christopher Obbard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231029183427.1781554-4-jonas@kwiboo.se \ --to=jonas@kwiboo.se \ --cc=benjamin.gaignard@collabora.com \ --cc=chris.obbard@collabora.com \ --cc=ezequiel@vanguardiasur.com.ar \ --cc=gregkh@linuxfoundation.org \ --cc=knaerzche@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=linux-staging@lists.linux.dev \ --cc=mchehab@kernel.org \ --cc=nicolas.dufresne@collabora.com \ --cc=sebastian.fricke@collabora.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.