All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: hverkuil-cisco@xs4all.nl, laurent.pinchart@ideasonboard.com,
	Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	matti.lehtimaki@gmail.com, quic_grosikop@quicinc.com
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 3/7] media: qcom: camss: Use common VFE pm_domain_on/pm_domain_off where applicable
Date: Fri, 03 Nov 2023 12:29:00 +0000	[thread overview]
Message-ID: <20231103-b4-camss-named-power-domains-v4-3-33a905359dbc@linaro.org> (raw)
In-Reply-To: <20231103-b4-camss-named-power-domains-v4-0-33a905359dbc@linaro.org>

For the various versions of VFE we have a boiler-plate
pm_domain_on/pm_domain_off callback pair of the general form.

- Error check.
  Not always done but applicable to all.

- device_link_add (DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME |
                   DL_FLAG_RPM_ACTIVE);

- Error check returning -EINVAL on error.

- Return 0

Reduce the pattern down to a common callback. VFE 4.1 is a special case
which to me also indicates that it is worthwhile maintaining an indirection
for the vfe_pm_domain_{on|off} for now.

Otherwise lets chuck out a bunch of needlessly replicated code.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-vfe-170.c | 35 -----------------------
 drivers/media/platform/qcom/camss/camss-vfe-4-1.c |  8 +++---
 drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 31 --------------------
 drivers/media/platform/qcom/camss/camss-vfe-4-8.c | 28 ------------------
 drivers/media/platform/qcom/camss/camss-vfe-480.c | 35 -----------------------
 drivers/media/platform/qcom/camss/camss-vfe.c     | 34 ++++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss-vfe.h     | 12 ++++++++
 7 files changed, 50 insertions(+), 133 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index 7451484317cc3..795ac3815339a 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -627,41 +627,6 @@ static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
 }
 
-/*
- * vfe_pm_domain_off - Disable power domains specific to this VFE.
- * @vfe: VFE Device
- */
-static void vfe_pm_domain_off(struct vfe_device *vfe)
-{
-	struct camss *camss = vfe->camss;
-
-	if (vfe->id >= camss->res->vfe_num)
-		return;
-
-	device_link_del(vfe->genpd_link);
-}
-
-/*
- * vfe_pm_domain_on - Enable power domains specific to this VFE.
- * @vfe: VFE Device
- */
-static int vfe_pm_domain_on(struct vfe_device *vfe)
-{
-	struct camss *camss = vfe->camss;
-
-	if (vfe->id >= camss->res->vfe_num)
-		return 0;
-
-	vfe->genpd_link = device_link_add(camss->dev, vfe->genpd,
-					  DL_FLAG_STATELESS |
-					  DL_FLAG_PM_RUNTIME |
-					  DL_FLAG_RPM_ACTIVE);
-	if (!vfe->genpd_link)
-		return -EINVAL;
-
-	return 0;
-}
-
 /*
  * vfe_queue_buffer - Add empty buffer
  * @vid: Video device structure
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
index 2911e4126e7ad..ef6b34c915df1 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
@@ -936,7 +936,7 @@ static irqreturn_t vfe_isr(int irq, void *dev)
  * vfe_pm_domain_off - Disable power domains specific to this VFE.
  * @vfe: VFE Device
  */
-static void vfe_pm_domain_off(struct vfe_device *vfe)
+static void vfe_4_1_pm_domain_off(struct vfe_device *vfe)
 {
 	/* nop */
 }
@@ -945,7 +945,7 @@ static void vfe_pm_domain_off(struct vfe_device *vfe)
  * vfe_pm_domain_on - Enable power domains specific to this VFE.
  * @vfe: VFE Device
  */
-static int vfe_pm_domain_on(struct vfe_device *vfe)
+static int vfe_4_1_pm_domain_on(struct vfe_device *vfe)
 {
 	return 0;
 }
@@ -999,8 +999,8 @@ const struct vfe_hw_ops vfe_ops_4_1 = {
 	.hw_version = vfe_hw_version,
 	.isr_read = vfe_isr_read,
 	.isr = vfe_isr,
-	.pm_domain_off = vfe_pm_domain_off,
-	.pm_domain_on = vfe_pm_domain_on,
+	.pm_domain_off = vfe_4_1_pm_domain_off,
+	.pm_domain_on = vfe_4_1_pm_domain_on,
 	.reg_update_clear = vfe_reg_update_clear,
 	.reg_update = vfe_reg_update,
 	.subdev_init = vfe_subdev_init,
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
index 2b4e7e039407b..7655d22a9fda2 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
@@ -1103,37 +1103,6 @@ static void vfe_isr_read(struct vfe_device *vfe, u32 *value0, u32 *value1)
 	writel_relaxed(VFE_0_IRQ_CMD_GLOBAL_CLEAR, vfe->base + VFE_0_IRQ_CMD);
 }
 
-/*
- * vfe_pm_domain_off - Disable power domains specific to this VFE.
- * @vfe: VFE Device
- */
-static void vfe_pm_domain_off(struct vfe_device *vfe)
-{
-	if (!vfe)
-		return;
-
-	device_link_del(vfe->genpd_link);
-}
-
-/*
- * vfe_pm_domain_on - Enable power domains specific to this VFE.
- * @vfe: VFE Device
- */
-static int vfe_pm_domain_on(struct vfe_device *vfe)
-{
-	struct camss *camss = vfe->camss;
-
-	vfe->genpd_link = device_link_add(camss->dev, vfe->genpd, DL_FLAG_STATELESS |
-					  DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
-
-	if (!vfe->genpd_link) {
-		dev_err(vfe->camss->dev, "Failed to add VFE#%d to power domain\n", vfe->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static void vfe_violation_read(struct vfe_device *vfe)
 {
 	u32 violation = readl_relaxed(vfe->base + VFE_0_VIOLATION_STATUS);
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
index 5e95343241304..f52fa30f3853e 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
@@ -1093,34 +1093,6 @@ static void vfe_isr_read(struct vfe_device *vfe, u32 *value0, u32 *value1)
 	writel_relaxed(VFE_0_IRQ_CMD_GLOBAL_CLEAR, vfe->base + VFE_0_IRQ_CMD);
 }
 
-/*
- * vfe_pm_domain_off - Disable power domains specific to this VFE.
- * @vfe: VFE Device
- */
-static void vfe_pm_domain_off(struct vfe_device *vfe)
-{
-	device_link_del(vfe->genpd_link);
-}
-
-/*
- * vfe_pm_domain_on - Enable power domains specific to this VFE.
- * @vfe: VFE Device
- */
-static int vfe_pm_domain_on(struct vfe_device *vfe)
-{
-	struct camss *camss = vfe->camss;
-
-	vfe->genpd_link = device_link_add(camss->dev, vfe->genpd, DL_FLAG_STATELESS |
-					  DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
-
-	if (!vfe->genpd_link) {
-		dev_err(vfe->camss->dev, "Failed to add VFE#%d to power domain\n", vfe->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static void vfe_violation_read(struct vfe_device *vfe)
 {
 	u32 violation = readl_relaxed(vfe->base + VFE_0_VIOLATION_STATUS);
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-480.c b/drivers/media/platform/qcom/camss/camss-vfe-480.c
index a70b8633bb3eb..4652e8b4cff58 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-480.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-480.c
@@ -452,41 +452,6 @@ static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
 }
 
-/*
- * vfe_pm_domain_off - Disable power domains specific to this VFE.
- * @vfe: VFE Device
- */
-static void vfe_pm_domain_off(struct vfe_device *vfe)
-{
-	struct camss *camss = vfe->camss;
-
-	if (vfe->id >= camss->res->vfe_num)
-		return;
-
-	device_link_del(vfe->genpd_link);
-}
-
-/*
- * vfe_pm_domain_on - Enable power domains specific to this VFE.
- * @vfe: VFE Device
- */
-static int vfe_pm_domain_on(struct vfe_device *vfe)
-{
-	struct camss *camss = vfe->camss;
-
-	if (vfe->id >= camss->res->vfe_num)
-		return 0;
-
-	vfe->genpd_link = device_link_add(camss->dev, vfe->genpd,
-					  DL_FLAG_STATELESS |
-					  DL_FLAG_PM_RUNTIME |
-					  DL_FLAG_RPM_ACTIVE);
-	if (!vfe->genpd_link)
-		return -EINVAL;
-
-	return 0;
-}
-
 /*
  * vfe_queue_buffer - Add empty buffer
  * @vid: Video device structure
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 94267b9974554..5172eb5612a1c 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -474,6 +474,40 @@ void vfe_isr_reset_ack(struct vfe_device *vfe)
 	complete(&vfe->reset_complete);
 }
 
+/*
+ * vfe_pm_domain_off - Disable power domains specific to this VFE.
+ * @vfe: VFE Device
+ */
+void vfe_pm_domain_off(struct vfe_device *vfe)
+{
+	if (!vfe->genpd)
+		return;
+
+	device_link_del(vfe->genpd_link);
+	vfe->genpd_link = NULL;
+}
+
+/*
+ * vfe_pm_domain_on - Enable power domains specific to this VFE.
+ * @vfe: VFE Device
+ */
+int vfe_pm_domain_on(struct vfe_device *vfe)
+{
+	struct camss *camss = vfe->camss;
+
+	if (!vfe->genpd)
+		return 0;
+
+	vfe->genpd_link = device_link_add(camss->dev, vfe->genpd,
+					  DL_FLAG_STATELESS |
+					  DL_FLAG_PM_RUNTIME |
+					  DL_FLAG_RPM_ACTIVE);
+	if (!vfe->genpd_link)
+		return -EINVAL;
+
+	return 0;
+}
+
 static int vfe_match_clock_names(struct vfe_device *vfe,
 				 struct camss_clock *clock)
 {
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index c1c50023d4876..992a2103ec44c 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -203,6 +203,18 @@ int vfe_reset(struct vfe_device *vfe);
  */
 int vfe_disable(struct vfe_line *line);
 
+/*
+ * vfe_pm_domain_off - Disable power domains specific to this VFE.
+ * @vfe: VFE Device
+ */
+void vfe_pm_domain_off(struct vfe_device *vfe);
+
+/*
+ * vfe_pm_domain_on - Enable power domains specific to this VFE.
+ * @vfe: VFE Device
+ */
+int vfe_pm_domain_on(struct vfe_device *vfe);
+
 extern const struct vfe_hw_ops vfe_ops_4_1;
 extern const struct vfe_hw_ops vfe_ops_4_7;
 extern const struct vfe_hw_ops vfe_ops_4_8;

-- 
2.42.0


  parent reply	other threads:[~2023-11-03 12:29 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-03 12:28 [PATCH v4 0/7] media: qcom: camss: Introduce support for named power-domains Bryan O'Donoghue
2023-11-03 12:28 ` [PATCH v4 1/7] media: qcom: camss: Flag which VFEs require a power-domain Bryan O'Donoghue
2023-11-03 12:28 ` [PATCH v4 2/7] media: qcom: camss: Convert to per-VFE pointer for power-domain linkages Bryan O'Donoghue
2023-11-03 12:29 ` Bryan O'Donoghue [this message]
2023-11-03 12:29 ` [PATCH v4 4/7] media: qcom: camss: Move VFE power-domain specifics into vfe.c Bryan O'Donoghue
2023-11-18  0:32   ` Konrad Dybcio
2023-11-18 11:35     ` Bryan O'Donoghue
2023-11-03 12:29 ` [PATCH v4 5/7] media: qcom: camss: Add support for named power-domains Bryan O'Donoghue
2023-11-18  0:38   ` Konrad Dybcio
2023-11-18  1:56     ` Bryan O'Donoghue
2023-11-03 12:29 ` [PATCH v4 6/7] media: qcom: camss: Flag VFE-lites to support more VFEs Bryan O'Donoghue
2023-11-18  0:41   ` Konrad Dybcio
2023-11-03 12:29 ` [PATCH v4 7/7] media: qcom: camss: Flag CSID-lites to support more CSIDs Bryan O'Donoghue
2023-11-18  0:44   ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231103-b4-camss-named-power-domains-v4-3-33a905359dbc@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=konrad.dybcio@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=matti.lehtimaki@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=quic_grosikop@quicinc.com \
    --cc=rfoss@kernel.org \
    --cc=todor.too@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.