From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: hverkuil-cisco@xs4all.nl, laurent.pinchart@ideasonboard.com,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
vincent.knecht@mailoo.org, matti.lehtimaki@gmail.com,
quic_grosikop@quicinc.com
Cc: linux-arm-msm@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v3 1/6] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
Date: Sun, 05 Nov 2023 17:45:00 +0000 [thread overview]
Message-ID: <20231105-b4-camss-sc8280xp-v3-1-4b3c372ff0f4@linaro.org> (raw)
In-Reply-To: <20231105-b4-camss-sc8280xp-v3-0-4b3c372ff0f4@linaro.org>
Add bindings for qcom,sc8280xp-camss in order to support the camera
subsystem for sc8280xp as found in the Lenovo x13s Laptop.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/media/qcom,sc8280xp-camss.yaml | 581 +++++++++++++++++++++
1 file changed, 581 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
new file mode 100644
index 0000000000000..88216c1a37709
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
@@ -0,0 +1,581 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc8280xp-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Camera Subsystem (CAMSS)
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-camss
+
+ clocks:
+ maxItems: 63
+
+ clock-names:
+ items:
+ - const: camnoc_axi
+ - const: camnoc_axi_src
+ - const: cpas_ahb
+ - const: cphy_rx_src
+ - const: csiphy0
+ - const: csiphy0_timer_src
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer_src
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer_src
+ - const: csiphy2_timer
+ - const: csiphy3
+ - const: csiphy3_timer_src
+ - const: csiphy3_timer
+ - const: vfe0_axi
+ - const: vfe0_src
+ - const: vfe0
+ - const: vfe0_cphy_rx
+ - const: vfe0_csid_src
+ - const: vfe0_csid
+ - const: vfe1_axi
+ - const: vfe1_src
+ - const: vfe1
+ - const: vfe1_cphy_rx
+ - const: vfe1_csid_src
+ - const: vfe1_csid
+ - const: vfe2_axi
+ - const: vfe2_src
+ - const: vfe2
+ - const: vfe2_cphy_rx
+ - const: vfe2_csid_src
+ - const: vfe2_csid
+ - const: vfe3_axi
+ - const: vfe3_src
+ - const: vfe3
+ - const: vfe3_cphy_rx
+ - const: vfe3_csid_src
+ - const: vfe3_csid
+ - const: vfe_lite0_src
+ - const: vfe_lite0
+ - const: vfe_lite0_cphy_rx
+ - const: vfe_lite0_csid_src
+ - const: vfe_lite0_csid
+ - const: vfe_lite1_src
+ - const: vfe_lite1
+ - const: vfe_lite1_cphy_rx
+ - const: vfe_lite1_csid_src
+ - const: vfe_lite1_csid
+ - const: vfe_lite2_src
+ - const: vfe_lite2
+ - const: vfe_lite2_cphy_rx
+ - const: vfe_lite2_csid_src
+ - const: vfe_lite2_csid
+ - const: vfe_lite3_src
+ - const: vfe_lite3
+ - const: vfe_lite3_cphy_rx
+ - const: vfe_lite3_csid_src
+ - const: vfe_lite3_csid
+ - const: gcc_axi_hf
+ - const: gcc_axi_sf
+ - const: slow_ahb_src
+
+ interrupts:
+ maxItems: 20
+
+ interrupt-names:
+ items:
+ - const: csid1_lite
+ - const: vfe_lite1
+ - const: csiphy3
+ - const: csid0
+ - const: vfe0
+ - const: csid1
+ - const: vfe1
+ - const: csid0_lite
+ - const: vfe_lite0
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csid2
+ - const: vfe2
+ - const: csid3_lite
+ - const: csid2_lite
+ - const: vfe_lite3
+ - const: vfe_lite2
+ - const: csid3
+ - const: vfe3
+
+ iommus:
+ maxItems: 16
+
+ interconnects:
+ maxItems: 4
+
+ interconnect-names:
+ items:
+ - const: cam_ahb
+ - const: cam_hf_mnoc
+ - const: cam_sf_mnoc
+ - const: cam_sf_icp_mnoc
+
+ power-domains:
+ items:
+ - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE3 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+ power-domain-names:
+ items:
+ - const: ife0
+ - const: ife1
+ - const: ife2
+ - const: ife3
+ - const: top
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY0.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY1.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY2.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data from CSIPHY3.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ reg:
+ maxItems: 20
+
+ reg-names:
+ items:
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy0
+ - const: csiphy1
+ - const: vfe0
+ - const: csid0
+ - const: vfe1
+ - const: csid1
+ - const: vfe2
+ - const: csid2
+ - const: vfe_lite0
+ - const: csid0_lite
+ - const: vfe_lite1
+ - const: csid1_lite
+ - const: vfe_lite2
+ - const: csid2_lite
+ - const: vfe_lite3
+ - const: csid3_lite
+ - const: vfe3
+ - const: csid3
+
+ vdda-phy-supply:
+ description:
+ Phandle to a regulator supply to PHY core block.
+
+ vdda-pll-supply:
+ description:
+ Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interconnects
+ - interconnect-names
+ - interrupts
+ - interrupt-names
+ - iommus
+ - power-domains
+ - power-domain-names
+ - reg
+ - reg-names
+ - vdda-phy-supply
+ - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camss: camss@ac5a000 {
+ compatible = "qcom,sc8280xp-camss";
+
+ reg = <0 0x0ac5a000 0 0x2000>,
+ <0 0x0ac5c000 0 0x2000>,
+ <0 0x0ac65000 0 0x2000>,
+ <0 0x0ac67000 0 0x2000>,
+ <0 0x0acaf000 0 0x4000>,
+ <0 0x0acb3000 0 0x1000>,
+ <0 0x0acb6000 0 0x4000>,
+ <0 0x0acba000 0 0x1000>,
+ <0 0x0acbd000 0 0x4000>,
+ <0 0x0acc1000 0 0x1000>,
+ <0 0x0acc4000 0 0x4000>,
+ <0 0x0acc8000 0 0x1000>,
+ <0 0x0accb000 0 0x4000>,
+ <0 0x0accf000 0 0x1000>,
+ <0 0x0acd2000 0 0x4000>,
+ <0 0x0acd6000 0 0x1000>,
+ <0 0x0acd9000 0 0x4000>,
+ <0 0x0acdd000 0 0x1000>,
+ <0 0x0ace0000 0 0x4000>,
+ <0 0x0ace4000 0 0x1000>;
+
+ reg-names = "csiphy2",
+ "csiphy3",
+ "csiphy0",
+ "csiphy1",
+ "vfe0",
+ "csid0",
+ "vfe1",
+ "csid1",
+ "vfe2",
+ "csid2",
+ "vfe_lite0",
+ "csid0_lite",
+ "vfe_lite1",
+ "csid1_lite",
+ "vfe_lite2",
+ "csid2_lite",
+ "vfe_lite3",
+ "csid3_lite",
+ "vfe3",
+ "csid3";
+
+ vdda-phy-supply = <&vreg_l6d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "csid1_lite",
+ "vfe_lite1",
+ "csiphy3",
+ "csid0",
+ "vfe0",
+ "csid1",
+ "vfe1",
+ "csid0_lite",
+ "vfe_lite0",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid2",
+ "vfe2",
+ "csid3_lite",
+ "csid2_lite",
+ "vfe_lite3",
+ "vfe_lite2",
+ "csid3",
+ "vfe3";
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc IFE_2_GDSC>,
+ <&camcc IFE_3_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "ife3",
+ "top";
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_CAMNOC_AXI_CLK_SRC>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CPHY_RX_CLK_SRC>,
+ <&camcc CAMCC_CSIPHY0_CLK>,
+ <&camcc CAMCC_CSI0PHYTIMER_CLK_SRC>,
+ <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY1_CLK>,
+ <&camcc CAMCC_CSI1PHYTIMER_CLK_SRC>,
+ <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY2_CLK>,
+ <&camcc CAMCC_CSI2PHYTIMER_CLK_SRC>,
+ <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY3_CLK>,
+ <&camcc CAMCC_CSI3PHYTIMER_CLK_SRC>,
+ <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+ <&camcc CAMCC_IFE_0_AXI_CLK>,
+ <&camcc CAMCC_IFE_0_CLK_SRC>,
+ <&camcc CAMCC_IFE_0_CLK>,
+ <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_0_CSID_CLK_SRC>,
+ <&camcc CAMCC_IFE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_1_AXI_CLK>,
+ <&camcc CAMCC_IFE_1_CLK_SRC>,
+ <&camcc CAMCC_IFE_1_CLK>,
+ <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_1_CSID_CLK_SRC>,
+ <&camcc CAMCC_IFE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_2_AXI_CLK>,
+ <&camcc CAMCC_IFE_2_CLK_SRC>,
+ <&camcc CAMCC_IFE_2_CLK>,
+ <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_2_CSID_CLK_SRC>,
+ <&camcc CAMCC_IFE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_3_AXI_CLK>,
+ <&camcc CAMCC_IFE_3_CLK_SRC>,
+ <&camcc CAMCC_IFE_3_CLK>,
+ <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_3_CSID_CLK_SRC>,
+ <&camcc CAMCC_IFE_3_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CLK_SRC>,
+ <&camcc CAMCC_IFE_LITE_0_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CSID_CLK_SRC>,
+ <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CLK_SRC>,
+ <&camcc CAMCC_IFE_LITE_1_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CSID_CLK_SRC>,
+ <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CLK_SRC>,
+ <&camcc CAMCC_IFE_LITE_2_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CSID_CLK_SRC>,
+ <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CLK_SRC>,
+ <&camcc CAMCC_IFE_LITE_3_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CSID_CLK_SRC>,
+ <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>;
+
+ clock-names = "camnoc_axi",
+ "camnoc_axi_src",
+ "cpas_ahb",
+ "cphy_rx_src",
+ "csiphy0",
+ "csiphy0_timer_src",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer_src",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer_src",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer_src",
+ "csiphy3_timer",
+ "vfe0_axi",
+ "vfe0_src",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid_src",
+ "vfe0_csid",
+ "vfe1_axi",
+ "vfe1_src",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid_src",
+ "vfe1_csid",
+ "vfe2_axi",
+ "vfe2_src",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe2_csid_src",
+ "vfe2_csid",
+ "vfe3_axi",
+ "vfe3_src",
+ "vfe3",
+ "vfe3_cphy_rx",
+ "vfe3_csid_src",
+ "vfe3_csid",
+ "vfe_lite0_src",
+ "vfe_lite0",
+ "vfe_lite0_cphy_rx",
+ "vfe_lite0_csid_src",
+ "vfe_lite0_csid",
+ "vfe_lite1_src",
+ "vfe_lite1",
+ "vfe_lite1_cphy_rx",
+ "vfe_lite1_csid_src",
+ "vfe_lite1_csid",
+ "vfe_lite2_src",
+ "vfe_lite2",
+ "vfe_lite2_cphy_rx",
+ "vfe_lite2_csid_src",
+ "vfe_lite2_csid",
+ "vfe_lite3_src",
+ "vfe_lite3",
+ "vfe_lite3_cphy_rx",
+ "vfe_lite3_csid_src",
+ "vfe_lite3_csid",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "slow_ahb_src";
+
+
+ iommus = <&apps_smmu 0x2000 0x4e0>,
+ <&apps_smmu 0x2020 0x4e0>,
+ <&apps_smmu 0x2040 0x4e0>,
+ <&apps_smmu 0x2060 0x4e0>,
+ <&apps_smmu 0x2080 0x4e0>,
+ <&apps_smmu 0x20e0 0x4e0>,
+ <&apps_smmu 0x20c0 0x4e0>,
+ <&apps_smmu 0x20a0 0x4e0>,
+ <&apps_smmu 0x2400 0x4e0>,
+ <&apps_smmu 0x2420 0x4e0>,
+ <&apps_smmu 0x2440 0x4e0>,
+ <&apps_smmu 0x2460 0x4e0>,
+ <&apps_smmu 0x2480 0x4e0>,
+ <&apps_smmu 0x24e0 0x4e0>,
+ <&apps_smmu 0x24c0 0x4e0>,
+ <&apps_smmu 0x24a0 0x4e0>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_mnoc",
+ "cam_sf_mnoc",
+ "cam_sf_icp_mnoc";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csiphy_ep0: endpoint@0 {
+ reg = <0>;
+ clock-lanes = <7>;
+ data-lanes = <0 1>;
+ remote-endpoint = <&sensor_ep>;
+ };
+ };
+ };
+ };
+ };
--
2.42.0
next prev parent reply other threads:[~2023-11-05 17:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-05 17:44 [PATCH v3 0/6] media: qcom: camss: Add sc8280xp support Bryan O'Donoghue
2023-11-05 17:45 ` Bryan O'Donoghue [this message]
2023-11-05 18:25 ` [PATCH v3 1/6] media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding Rob Herring
2023-11-05 18:27 ` Krzysztof Kozlowski
2023-11-05 17:45 ` [PATCH v3 2/6] media: qcom: camss: Add CAMSS_SC8280XP enum Bryan O'Donoghue
2023-11-05 17:45 ` [PATCH v3 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init Bryan O'Donoghue
2023-11-07 21:43 ` Konrad Dybcio
2023-11-08 0:36 ` Bryan O'Donoghue
2023-11-05 17:45 ` [PATCH v3 4/6] media: qcom: camss: Add sc8280xp resource details Bryan O'Donoghue
2023-11-07 21:48 ` Konrad Dybcio
2023-11-08 0:47 ` Bryan O'Donoghue
2023-11-05 17:45 ` [PATCH v3 5/6] media: qcom: camss: Add sc8280xp support Bryan O'Donoghue
2023-11-07 21:37 ` Konrad Dybcio
2023-11-05 17:45 ` [PATCH v3 6/6] media: qcom: camss: vfe-17x: Rename camss-vfe-170 to camss-vfe-17x Bryan O'Donoghue
2023-11-07 21:41 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231105-b4-camss-sc8280xp-v3-1-4b3c372ff0f4@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=matti.lehtimaki@gmail.com \
--cc=mchehab@kernel.org \
--cc=quic_grosikop@quicinc.com \
--cc=rfoss@kernel.org \
--cc=robh+dt@kernel.org \
--cc=todor.too@gmail.com \
--cc=vincent.knecht@mailoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.