All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shayne Chen <shayne.chen@mediatek.com>
To: Felix Fietkau <nbd@nbd.name>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
	Lorenzo Bianconi <lorenzo@kernel.org>,
	Ryder Lee <ryder.lee@mediatek.com>,
	Evelyn Tsai <evelyn.tsai@mediatek.com>,
	Bo Jiao <Bo.Jiao@mediatek.com>,
	linux-mediatek <linux-mediatek@lists.infradead.org>,
	StanleyYP Wang <StanleyYP.Wang@mediatek.com>,
	Shayne Chen <shayne.chen@mediatek.com>
Subject: [PATCH 4/8] wifi: mt76: mt7996: rework register offsets for mt7992
Date: Mon, 13 Nov 2023 15:06:15 +0800	[thread overview]
Message-ID: <20231113070619.19964-5-shayne.chen@mediatek.com> (raw)
In-Reply-To: <20231113070619.19964-1-shayne.chen@mediatek.com>

From: StanleyYP Wang <StanleyYP.Wang@mediatek.com>

Add mt7992_offs to differentiate registers that share the same
definitions with mt7996 chipsets but have differnet offsets.
This is a preliminary patch for mt7992 chipsets support.

Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7996/mmio.c  | 59 ++++++++++++++
 .../net/wireless/mediatek/mt76/mt7996/regs.h  | 76 +++++++++++++------
 2 files changed, 112 insertions(+), 23 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
index 739d7f53d347..b1119f62c946 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mmio.c
@@ -30,6 +30,58 @@ static const struct __base mt7996_reg_base[] = {
 	[WF_RATE_BASE]		= { { 0x820ee000, 0x820fe000, 0x830ee000 } },
 };
 
+static const u32 mt7996_offs[] = {
+	[MIB_RVSR0]		= 0x720,
+	[MIB_RVSR1]		= 0x724,
+	[MIB_BTSCR5]		= 0x788,
+	[MIB_BTSCR6]		= 0x798,
+	[MIB_RSCR1]		= 0x7ac,
+	[MIB_RSCR27]		= 0x954,
+	[MIB_RSCR28]		= 0x958,
+	[MIB_RSCR29]		= 0x95c,
+	[MIB_RSCR30]		= 0x960,
+	[MIB_RSCR31]		= 0x964,
+	[MIB_RSCR33]		= 0x96c,
+	[MIB_RSCR35]		= 0x974,
+	[MIB_RSCR36]		= 0x978,
+	[MIB_BSCR0]		= 0x9cc,
+	[MIB_BSCR1]		= 0x9d0,
+	[MIB_BSCR2]		= 0x9d4,
+	[MIB_BSCR3]		= 0x9d8,
+	[MIB_BSCR4]		= 0x9dc,
+	[MIB_BSCR5]		= 0x9e0,
+	[MIB_BSCR6]		= 0x9e4,
+	[MIB_BSCR7]		= 0x9e8,
+	[MIB_BSCR17]		= 0xa10,
+	[MIB_TRDR1]		= 0xa28,
+};
+
+static const u32 mt7992_offs[] = {
+	[MIB_RVSR0]		= 0x760,
+	[MIB_RVSR1]		= 0x764,
+	[MIB_BTSCR5]		= 0x7c8,
+	[MIB_BTSCR6]		= 0x7d8,
+	[MIB_RSCR1]		= 0x7f0,
+	[MIB_RSCR27]		= 0x998,
+	[MIB_RSCR28]		= 0x99c,
+	[MIB_RSCR29]		= 0x9a0,
+	[MIB_RSCR30]		= 0x9a4,
+	[MIB_RSCR31]		= 0x9a8,
+	[MIB_RSCR33]		= 0x9b0,
+	[MIB_RSCR35]		= 0x9b8,
+	[MIB_RSCR36]		= 0x9bc,
+	[MIB_BSCR0]		= 0xac8,
+	[MIB_BSCR1]		= 0xacc,
+	[MIB_BSCR2]		= 0xad0,
+	[MIB_BSCR3]		= 0xad4,
+	[MIB_BSCR4]		= 0xad8,
+	[MIB_BSCR5]		= 0xadc,
+	[MIB_BSCR6]		= 0xae0,
+	[MIB_BSCR7]		= 0xae4,
+	[MIB_BSCR17]		= 0xb0c,
+	[MIB_TRDR1]		= 0xb24,
+};
+
 static const struct __map mt7996_reg_map[] = {
 	{ 0x54000000, 0x02000, 0x1000 }, /* WFDMA_0 (PCIE0 MCU DMA0) */
 	{ 0x55000000, 0x03000, 0x1000 }, /* WFDMA_1 (PCIE0 MCU DMA1) */
@@ -382,6 +434,13 @@ static int mt7996_mmio_init(struct mt76_dev *mdev,
 	switch (device_id) {
 	case 0x7990:
 		dev->reg.base = mt7996_reg_base;
+		dev->reg.offs_rev = mt7996_offs;
+		dev->reg.map = mt7996_reg_map;
+		dev->reg.map_size = ARRAY_SIZE(mt7996_reg_map);
+		break;
+	case 0x7992:
+		dev->reg.base = mt7996_reg_base;
+		dev->reg.offs_rev = mt7992_offs;
 		dev->reg.map = mt7996_reg_map;
 		dev->reg.map_size = ARRAY_SIZE(mt7996_reg_map);
 		break;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/regs.h b/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
index 6623a6ba12d6..21637e3aae42 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
@@ -19,6 +19,7 @@ struct __base {
 /* used to differentiate between generations */
 struct mt7996_reg_desc {
 	const struct __base *base;
+	const u32 *offs_rev;
 	const struct __map *map;
 	u32 map_size;
 };
@@ -39,6 +40,35 @@ enum base_rev {
 
 #define __BASE(_id, _band)			(dev->reg.base[(_id)].band_base[(_band)])
 
+enum offs_rev {
+	MIB_RVSR0,
+	MIB_RVSR1,
+	MIB_BTSCR5,
+	MIB_BTSCR6,
+	MIB_RSCR1,
+	MIB_RSCR27,
+	MIB_RSCR28,
+	MIB_RSCR29,
+	MIB_RSCR30,
+	MIB_RSCR31,
+	MIB_RSCR33,
+	MIB_RSCR35,
+	MIB_RSCR36,
+	MIB_BSCR0,
+	MIB_BSCR1,
+	MIB_BSCR2,
+	MIB_BSCR3,
+	MIB_BSCR4,
+	MIB_BSCR5,
+	MIB_BSCR6,
+	MIB_BSCR7,
+	MIB_BSCR17,
+	MIB_TRDR1,
+	__MT_OFFS_MAX,
+};
+
+#define __OFFS(id)			(dev->reg.offs_rev[(id)])
+
 /* RRO TOP */
 #define MT_RRO_TOP_BASE				0xA000
 #define MT_RRO_TOP(ofs)				(MT_RRO_TOP_BASE + (ofs))
@@ -178,32 +208,32 @@ enum base_rev {
 #define MT_WF_MIB_BASE(_band)			__BASE(WF_MIB_BASE, (_band))
 #define MT_WF_MIB(_band, ofs)			(MT_WF_MIB_BASE(_band) + (ofs))
 
-#define MT_MIB_BSCR0(_band)			MT_WF_MIB(_band, 0x9cc)
-#define MT_MIB_BSCR1(_band)			MT_WF_MIB(_band, 0x9d0)
-#define MT_MIB_BSCR2(_band)			MT_WF_MIB(_band, 0x9d4)
-#define MT_MIB_BSCR3(_band)			MT_WF_MIB(_band, 0x9d8)
-#define MT_MIB_BSCR4(_band)			MT_WF_MIB(_band, 0x9dc)
-#define MT_MIB_BSCR5(_band)			MT_WF_MIB(_band, 0x9e0)
-#define MT_MIB_BSCR6(_band)			MT_WF_MIB(_band, 0x9e4)
-#define MT_MIB_BSCR7(_band)			MT_WF_MIB(_band, 0x9e8)
-#define MT_MIB_BSCR17(_band)			MT_WF_MIB(_band, 0xa10)
+#define MT_MIB_BSCR0(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR0))
+#define MT_MIB_BSCR1(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR1))
+#define MT_MIB_BSCR2(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR2))
+#define MT_MIB_BSCR3(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR3))
+#define MT_MIB_BSCR4(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR4))
+#define MT_MIB_BSCR5(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR5))
+#define MT_MIB_BSCR6(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR6))
+#define MT_MIB_BSCR7(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR7))
+#define MT_MIB_BSCR17(_band)			MT_WF_MIB(_band, __OFFS(MIB_BSCR17))
 
 #define MT_MIB_TSCR5(_band)			MT_WF_MIB(_band, 0x6c4)
 #define MT_MIB_TSCR6(_band)			MT_WF_MIB(_band, 0x6c8)
 #define MT_MIB_TSCR7(_band)			MT_WF_MIB(_band, 0x6d0)
 
-#define MT_MIB_RSCR1(_band)			MT_WF_MIB(_band, 0x7ac)
+#define MT_MIB_RSCR1(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR1))
 /* rx mpdu counter, full 32 bits */
-#define MT_MIB_RSCR31(_band)			MT_WF_MIB(_band, 0x964)
-#define MT_MIB_RSCR33(_band)			MT_WF_MIB(_band, 0x96c)
+#define MT_MIB_RSCR31(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR31))
+#define MT_MIB_RSCR33(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR33))
 
 #define MT_MIB_SDR6(_band)			MT_WF_MIB(_band, 0x020)
 #define MT_MIB_SDR6_CHANNEL_IDL_CNT_MASK	GENMASK(15, 0)
 
-#define MT_MIB_RVSR0(_band)			MT_WF_MIB(_band, 0x720)
+#define MT_MIB_RVSR0(_band)			MT_WF_MIB(_band, __OFFS(MIB_RVSR0))
 
-#define MT_MIB_RSCR35(_band)			MT_WF_MIB(_band, 0x974)
-#define MT_MIB_RSCR36(_band)			MT_WF_MIB(_band, 0x978)
+#define MT_MIB_RSCR35(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR35))
+#define MT_MIB_RSCR36(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR36))
 
 /* tx ampdu cnt, full 32 bits */
 #define MT_MIB_TSCR0(_band)			MT_WF_MIB(_band, 0x6b0)
@@ -216,16 +246,16 @@ enum base_rev {
 #define MT_MIB_TSCR4(_band)			MT_WF_MIB(_band, 0x6c0)
 
 /* rx ampdu count, 32-bit */
-#define MT_MIB_RSCR27(_band)			MT_WF_MIB(_band, 0x954)
+#define MT_MIB_RSCR27(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR27))
 
 /* rx ampdu bytes count, 32-bit */
-#define MT_MIB_RSCR28(_band)			MT_WF_MIB(_band, 0x958)
+#define MT_MIB_RSCR28(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR28))
 
 /* rx ampdu valid subframe count */
-#define MT_MIB_RSCR29(_band)			MT_WF_MIB(_band, 0x95c)
+#define MT_MIB_RSCR29(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR29))
 
 /* rx ampdu valid subframe bytes count, 32bits */
-#define MT_MIB_RSCR30(_band)			MT_WF_MIB(_band, 0x960)
+#define MT_MIB_RSCR30(_band)			MT_WF_MIB(_band, __OFFS(MIB_RSCR30))
 
 /* remaining windows protected stats */
 #define MT_MIB_SDR27(_band)			MT_WF_MIB(_band, 0x080)
@@ -234,18 +264,18 @@ enum base_rev {
 #define MT_MIB_SDR28(_band)			MT_WF_MIB(_band, 0x084)
 #define MT_MIB_SDR28_TX_RWP_NEED_CNT		GENMASK(15, 0)
 
-#define MT_MIB_RVSR1(_band)			MT_WF_MIB(_band, 0x724)
+#define MT_MIB_RVSR1(_band)			MT_WF_MIB(_band, __OFFS(MIB_RVSR1))
 
 /* rx blockack count, 32 bits */
 #define MT_MIB_TSCR1(_band)			MT_WF_MIB(_band, 0x6b4)
 
 #define MT_MIB_BTSCR0(_band)			MT_WF_MIB(_band, 0x5e0)
-#define MT_MIB_BTSCR5(_band)			MT_WF_MIB(_band, 0x788)
-#define MT_MIB_BTSCR6(_band)			MT_WF_MIB(_band, 0x798)
+#define MT_MIB_BTSCR5(_band)			MT_WF_MIB(_band, __OFFS(MIB_BTSCR5))
+#define MT_MIB_BTSCR6(_band)			MT_WF_MIB(_band, __OFFS(MIB_BTSCR6))
 
 #define MT_MIB_BFTFCR(_band)			MT_WF_MIB(_band, 0x5d0)
 
-#define MT_TX_AGG_CNT(_band, n)			MT_WF_MIB(_band, 0xa28 + ((n) << 2))
+#define MT_TX_AGG_CNT(_band, n)			MT_WF_MIB(_band, __OFFS(MIB_TRDR1) + ((n) << 2))
 #define MT_MIB_ARNG(_band, n)			MT_WF_MIB(_band, 0x0b0 + ((n) << 2))
 #define MT_MIB_ARNCR_RANGE(val, n)		(((val) >> ((n) << 4)) & GENMASK(9, 0))
 
-- 
2.39.2


  parent reply	other threads:[~2023-11-13  7:07 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-13  7:06 [PATCH 0/8] Add MT7992 support Shayne Chen
2023-11-13  7:06 ` [PATCH 1/8] wifi: mt76: mt7996: introduce mt7996_band_valid() Shayne Chen
2023-11-13  7:06 ` [PATCH 2/8] wifi: mt76: connac: add firmware support for mt7992 Shayne Chen
2023-11-13  7:06 ` [PATCH 3/8] wifi: mt76: mt7996: add DMA " Shayne Chen
2023-11-13  7:06 ` Shayne Chen [this message]
2023-11-13  7:06 ` [PATCH 5/8] wifi: mt76: mt7996: support mt7992 eeprom loading Shayne Chen
2023-11-13 11:08   ` Lorenzo Bianconi
2023-11-13  7:06 ` [PATCH 6/8] wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992 Shayne Chen
2023-11-13  7:06 ` [PATCH 7/8] wifi: mt76: connac: add new definition of tx descriptor Shayne Chen
2023-11-13  7:06 ` [PATCH 8/8] wifi: mt76: mt7996: add PCI IDs for mt7992 Shayne Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231113070619.19964-5-shayne.chen@mediatek.com \
    --to=shayne.chen@mediatek.com \
    --cc=Bo.Jiao@mediatek.com \
    --cc=StanleyYP.Wang@mediatek.com \
    --cc=evelyn.tsai@mediatek.com \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=lorenzo@kernel.org \
    --cc=nbd@nbd.name \
    --cc=ryder.lee@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.