[PATCH] mfd: wm831x: Remove redundant forever while loop

From: Maciej Strozek <mstrozek@opensource.cirrus.com>
To: Lee Jones <lee@kernel.org>
Cc: <patches@opensource.cirrus.com>, <linux-kernel@vger.kernel.org>,
	"Maciej Strozek" <mstrozek@opensource.cirrus.com>
Subject: [PATCH] mfd: wm831x: Remove redundant forever while loop
Date: Fri, 17 Nov 2023 15:40:37 +0000	[thread overview]
Message-ID: <20231117154037.67676-1-mstrozek@opensource.cirrus.com> (raw)

Current code excutes only once despite the while loop, so remove the
loop. Also msleep(1) will likely result in a larger sleep, so increase
its value for clarity while keeping the same behaviour.

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
---
 drivers/mfd/wm831x-auxadc.c | 46 +++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 25 deletions(-)

diff --git a/drivers/mfd/wm831x-auxadc.c b/drivers/mfd/wm831x-auxadc.c
index 65b98f3fbd92..49f0ffd68d47 100644
--- a/drivers/mfd/wm831x-auxadc.c
+++ b/drivers/mfd/wm831x-auxadc.c
@@ -179,32 +179,28 @@ static int wm831x_auxadc_read_polled(struct wm831x *wm831x,
 		goto disable;
 	}
 
-	/* If we're not using interrupts then poll the
-	 * interrupt status register */
-	timeout = 5;
-	while (timeout) {
-		msleep(1);
-
-		ret = wm831x_reg_read(wm831x,
-				      WM831X_INTERRUPT_STATUS_1);
-		if (ret < 0) {
-			dev_err(wm831x->dev,
-				"ISR 1 read failed: %d\n", ret);
-			goto disable;
-		}
+	/* If we're not using interrupts then read the
+	 * interrupt status register
+	 */
+	msleep(20);
+	ret = wm831x_reg_read(wm831x,
+				WM831X_INTERRUPT_STATUS_1);
+	if (ret < 0) {
+		dev_err(wm831x->dev,
+			"ISR 1 read failed: %d\n", ret);
+		goto disable;
+	}
 
-		/* Did it complete? */
-		if (ret & WM831X_AUXADC_DATA_EINT) {
-			wm831x_reg_write(wm831x,
-					 WM831X_INTERRUPT_STATUS_1,
-					 WM831X_AUXADC_DATA_EINT);
-			break;
-		} else {
-			dev_err(wm831x->dev,
-				"AUXADC conversion timeout\n");
-			ret = -EBUSY;
-			goto disable;
-		}
+	/* Did it complete? */
+	if (ret & WM831X_AUXADC_DATA_EINT) {
+		wm831x_reg_write(wm831x,
+					WM831X_INTERRUPT_STATUS_1,
+					WM831X_AUXADC_DATA_EINT);
+	} else {
+		dev_err(wm831x->dev,
+			"AUXADC conversion timeout\n");
+		ret = -EBUSY;
+		goto disable;
 	}
 
 	ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
-- 
2.34.1

