From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [rft, PATCH v1 1/1] pinctrl: qcom: lpass-lpi: Remove unused member in struct lpi_pingroup
Date: Mon, 20 Nov 2023 21:26:08 +0200 [thread overview]
Message-ID: <20231120193353.1670732-1-andriy.shevchenko@linux.intel.com> (raw)
The group is not used anywhere, remove it. And if needed, it should be
struct pingroup anyway.
While at it, replace kernel.h with what exactly being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
_Seems_ like this (I only read the code), hence rft.
drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 6 +----
.../pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 16 -------------
.../pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c | 20 ----------------
.../pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c | 20 ----------------
.../pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 15 ------------
.../pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c | 16 -------------
.../pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c | 24 -------------------
7 files changed, 1 insertion(+), 116 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
index 206b2c0ca828..a9b2f65c1ebe 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
@@ -6,8 +6,8 @@
#ifndef __PINCTRL_LPASS_LPI_H__
#define __PINCTRL_LPASS_LPI_H__
+#include <linux/array_size.h>
#include <linux/bits.h>
-#include <linux/kernel.h>
#include "../core.h"
@@ -45,11 +45,8 @@ struct pinctrl_pin_desc;
#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
{ \
- .group.name = "gpio" #id, \
- .group.pins = gpio##id##_pins, \
.pin = id, \
.slew_offset = soff, \
- .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \
.funcs = (int[]){ \
LPI_MUX_gpio, \
LPI_MUX_##f1, \
@@ -67,7 +64,6 @@ struct pinctrl_pin_desc;
#define LPI_FLAG_SLEW_RATE_SAME_REG BIT(0)
struct lpi_pingroup {
- struct group_desc group;
unsigned int pin;
/* Bit offset in slew register for SoundWire pins only */
int slew_offset;
diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
index 99156217c6a5..6bb39812e1d8 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
@@ -36,22 +36,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-
static const struct pinctrl_pin_desc sc7280_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
index b33483056f42..c0369baf3398 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
@@ -45,26 +45,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-static int gpio15_pins[] = { 15 };
-static int gpio16_pins[] = { 16 };
-static int gpio17_pins[] = { 17 };
-static int gpio18_pins[] = { 18 };
-
static const struct pinctrl_pin_desc sc8280xp_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
index e8a6f6f6af54..316d6fc69131 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
@@ -36,26 +36,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-static int gpio15_pins[] = { 15 };
-static int gpio16_pins[] = { 16 };
-static int gpio17_pins[] = { 17 };
-static int gpio18_pins[] = { 18 };
-
static const struct pinctrl_pin_desc sm6115_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
index cb10ce8d5d28..9791d9ba5087 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
@@ -36,21 +36,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-
static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
index 297cc95ac3c0..5b9a2cb216bd 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
@@ -36,22 +36,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-
static const struct pinctrl_pin_desc sm8350_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
index 2e7896791fc0..a028cbb49947 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
@@ -52,30 +52,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-static int gpio15_pins[] = { 15 };
-static int gpio16_pins[] = { 16 };
-static int gpio17_pins[] = { 17 };
-static int gpio18_pins[] = { 18 };
-static int gpio19_pins[] = { 19 };
-static int gpio20_pins[] = { 20 };
-static int gpio21_pins[] = { 21 };
-static int gpio22_pins[] = { 22 };
-
static const struct pinctrl_pin_desc sm8450_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
--
2.43.0.rc1.1.gbec44491f096
next reply other threads:[~2023-11-20 19:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-20 19:26 Andy Shevchenko [this message]
2023-11-20 23:39 ` [rft, PATCH v1 1/1] pinctrl: qcom: lpass-lpi: Remove unused member in struct lpi_pingroup kernel test robot
2023-11-21 3:47 ` kernel test robot
2023-11-21 7:14 ` Krzysztof Kozlowski
2023-11-21 17:15 ` Andy Shevchenko
2023-11-22 15:34 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231120193353.1670732-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.