All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "John W. Linville" <linville@tuxdriver.com>,
	Kalle Valo <kvalo@kernel.org>,
	Larry Finger <Larry.Finger@lwfinger.net>,
	linux-wireless@vger.kernel.org, Ping-Ke Shih <pkshih@realtek.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>, stable@vger.kernel.org
Subject: [PATCH v2 02/10] wifi: rtlwifi: Convert LNKCTL change to PCIe cap RMW accessors
Date: Fri, 24 Nov 2023 10:47:17 +0200	[thread overview]
Message-ID: <20231124084725.12738-3-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20231124084725.12738-1-ilpo.jarvinen@linux.intel.com>

The rtlwifi driver comes with custom code to write into PCIe Link
Control register. RMW access for the Link Control register requires
locking that is already provided by the standard PCIe capability
accessors.

Convert the custom RMW code writing into LNKCTL register to standard
RMW capability accessors. The accesses are changed to cover the full
LNKCTL register instead of touching just a single byte of the register.

Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/net/wireless/realtek/rtlwifi/pci.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c
index 206eca310cd7..b118df035243 100644
--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -164,21 +164,29 @@ static bool _rtl_pci_platform_switch_device_pci_aspm(
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 
+	value &= PCI_EXP_LNKCTL_ASPMC;
+
 	if (rtlhal->hw_type != HARDWARE_TYPE_RTL8192SE)
-		value |= 0x40;
+		value |= PCI_EXP_LNKCTL_CCC;
 
-	pci_write_config_byte(rtlpci->pdev, 0x80, value);
+	pcie_capability_clear_and_set_word(rtlpci->pdev, PCI_EXP_LNKCTL,
+					   PCI_EXP_LNKCTL_ASPMC | value,
+					   value);
 
 	return false;
 }
 
-/*When we set 0x01 to enable clk request. Set 0x0 to disable clk req.*/
-static void _rtl_pci_switch_clk_req(struct ieee80211_hw *hw, u8 value)
+/* @value is PCI_EXP_LNKCTL_CLKREQ_EN or 0 to enable/disable clk request. */
+static void _rtl_pci_switch_clk_req(struct ieee80211_hw *hw, u16 value)
 {
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 
-	pci_write_config_byte(rtlpci->pdev, 0x81, value);
+	value &= PCI_EXP_LNKCTL_CLKREQ_EN;
+
+	pcie_capability_clear_and_set_word(rtlpci->pdev, PCI_EXP_LNKCTL,
+					   PCI_EXP_LNKCTL_CLKREQ_EN,
+					   value);
 
 	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192SE)
 		udelay(100);
@@ -259,7 +267,8 @@ static void rtl_pci_enable_aspm(struct ieee80211_hw *hw)
 
 	if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) {
 		_rtl_pci_switch_clk_req(hw, (ppsc->reg_rfps_level &
-					     RT_RF_OFF_LEVL_CLK_REQ) ? 1 : 0);
+					     RT_RF_OFF_LEVL_CLK_REQ) ?
+					     PCI_EXP_LNKCTL_CLKREQ_EN : 0);
 		RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_CLK_REQ);
 	}
 	udelay(100);
-- 
2.30.2


  parent reply	other threads:[~2023-11-24  8:47 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-24  8:47 [PATCH v2 00/10] wifi: rtlwifi: PCI related fixes & cleanups Ilpo Järvinen
2023-11-24  8:47 ` [PATCH v2 01/10] wifi: rtlwifi: Remove bogus and dangerous ASPM disable/enable code Ilpo Järvinen
2023-12-01 12:41   ` Kalle Valo
2023-11-24  8:47 ` Ilpo Järvinen [this message]
2023-11-24  8:47 ` [PATCH v2 03/10] wifi: rtlwifi: Convert to use PCIe capability accessors Ilpo Järvinen
2023-11-24  8:47 ` [PATCH v2 04/10] wifi: rtlwifi: rtl8821ae: Remove unnecessary PME_Status bit set Ilpo Järvinen
2023-11-24  8:47 ` [PATCH v2 05/10] wifi: rtlwifi: rtl8821ae: Reverse PM Capability exists check Ilpo Järvinen
2023-11-24  8:47 ` [PATCH v2 06/10] wifi: rtlwifi: rtl8821ae: Use pci_find_capability() Ilpo Järvinen
2023-11-24  8:47 ` [PATCH v2 07/10] wifi: rtlwifi: rtl8821ae: Add pdev into _rtl8821ae_clear_pci_pme_status() Ilpo Järvinen
2023-11-24  8:47 ` [PATCH v2 08/10] wifi: rtlwifi: rtl8821ae: Access full PMCS reg and use pci_regs.h Ilpo Järvinen
2023-11-24  8:47 ` [PATCH v2 09/10] wifi: rtlwifi: Remove unused PCI related defines and struct Ilpo Järvinen
2023-11-24  8:47 ` [PATCH v2 10/10] wifi: rtlwifi: Remove bridge vendor/device ids Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231124084725.12738-3-ilpo.jarvinen@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=bhelgaas@google.com \
    --cc=kvalo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=pkshih@realtek.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.