From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Stephen Boyd <sboyd@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-iio@vger.kernel.org,
linux-mmc@vger.kernel.org, netdev@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-pm@vger.kernel.org, linux-remoteproc@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH] dt-bindings: correct white-spaces in examples
Date: Fri, 24 Nov 2023 10:21:21 +0100 [thread overview]
Message-ID: <20231124092121.16866-1-krzysztof.kozlowski@linaro.org> (raw)
Use only one and exactly one space around '=' in DTS example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Merging idea: Rob's DT.
Should apply cleanly on Rob's for-next.
---
.../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +-
.../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +-
Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++---
.../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +-
.../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +-
.../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++--
Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +-
Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +-
.../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +-
.../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++---
.../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++----
.../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++--
.../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++--
.../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++----
14 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index fde07e4b119d..406a922a714e 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -113,7 +113,7 @@ examples:
hd44780 {
compatible = "hit,hd44780";
display-height-chars = <2>;
- display-width-chars = <16>;
+ display-width-chars = <16>;
data-gpios = <&pcf8574 4 0>,
<&pcf8574 5 0>,
<&pcf8574 6 0>,
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
index 624984d51c10..7f8d98226437 100644
--- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -125,7 +125,7 @@ examples:
clk25m: clock-oscillator-25m {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <25000000>;
+ clock-frequency = <25000000>;
clock-output-names = "clk25m";
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 5fcc8dd012f1..be2616ff9af6 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -80,9 +80,9 @@ examples:
compatible = "adi,ad7780";
reg = <0>;
- avdd-supply = <&vdd_supply>;
- powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&vdd_supply>;
+ powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 73def67fbe01..b6a233cd5f6b 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -58,7 +58,7 @@ examples:
reg = <0x3600>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <1>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
index b3a626389870..64abe9a4cd9e 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -46,6 +46,6 @@ examples:
pmic_rradc: adc@4500 {
compatible = "qcom,pmi8998-rradc";
reg = <0x4500>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <1>;
};
};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
index 2b153d7c5421..e44e4e5708a7 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
@@ -55,8 +55,8 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq-st.h>
irq-syscfg {
- compatible = "st,stih407-irq-syscfg";
- st,syscfg = <&syscfg_cpu>;
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_cpu>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 2459a55ed540..940b12688167 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -203,7 +203,7 @@ examples:
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- cd-gpios = <&gpio2 31 0x4>;
+ cd-gpios = <&gpio2 31 0x4>;
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-cmd;
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
index 973e478a399d..bf6cbc7c2ba3 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -120,7 +120,7 @@ examples:
pinctrl-names = "default";
pinctrl-0 = <&cps_sfpp0_pins>;
tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
};
mdio {
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 53da2edd7c9a..120e3bb1e545 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -83,7 +83,7 @@ examples:
<0x0 0x28050000 0x0 0x00010000>,
<0x0 0x24200000 0x0 0x00002000>,
<0x0 0x24162000 0x0 0x00001000>;
- reg-names = "dbi", "config", "ulreg", "smu", "mpu";
+ reg-names = "dbi", "config", "ulreg", "smu", "mpu";
device_type = "pci";
bus-range = <0x00 0xff>;
num-lanes = <2>;
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index b5ca40d0e251..d476de82e5c3 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -185,17 +185,17 @@ examples:
sd1_mux {
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
<RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
- power-source = <3300>;
+ power-source = <3300>;
};
sd1_data {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
- power-source = <3300>;
+ power-source = <3300>;
};
sd1_ctrl {
pins = "SD1_CLK", "SD1_CMD";
- power-source = <3300>;
+ power-source = <3300>;
};
};
};
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
index 07e38be39f1b..89f9603499b4 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -79,10 +79,10 @@ examples:
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- richtek,output-charge-current = <500000>;
- richtek,end-of-charge-percentage = <10>;
- richtek,battery-regulation-voltage = <4200000>;
- richtek,boost-output-voltage = <5050000>;
+ richtek,output-charge-current = <500000>;
+ richtek,end-of-charge-percentage = <10>;
+ richtek,battery-regulation-voltage = <4200000>;
+ richtek,boost-output-voltage = <5050000>;
richtek,min-input-voltage-regulation = <4500000>;
richtek,avg-input-current-regulation = <500000>;
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 0221397eb51e..f825ee9efd81 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -62,8 +62,8 @@ examples:
regulator-name = "buck1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
};
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index 6de5b027f990..0d34af98403f 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -98,8 +98,8 @@ examples:
regulator-name = "buck1";
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <3587500>;
- regulator-min-microamp = <460000>;
- regulator-max-microamp = <7600000>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <7600000>;
regulator-boot-on;
mps,buck-ovp-disable;
mps,buck-phase-delay = /bits/ 8 <2>;
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index 30632efdad8b..df36e29d974c 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -113,10 +113,10 @@ examples:
};
imx7d-cm4 {
- compatible = "fsl,imx7d-cm4";
- memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
- syscon = <&src>;
- clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
+ compatible = "fsl,imx7d-cm4";
+ memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+ syscon = <&src>;
+ clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
};
- |
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Stephen Boyd <sboyd@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-iio@vger.kernel.org,
linux-mmc@vger.kernel.org, netdev@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-pm@vger.kernel.org, linux-remoteproc@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH] dt-bindings: correct white-spaces in examples
Date: Fri, 24 Nov 2023 10:21:21 +0100 [thread overview]
Message-ID: <20231124092121.16866-1-krzysztof.kozlowski@linaro.org> (raw)
Use only one and exactly one space around '=' in DTS example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Merging idea: Rob's DT.
Should apply cleanly on Rob's for-next.
---
.../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +-
.../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +-
Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++---
.../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +-
.../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +-
.../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++--
Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +-
Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +-
.../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +-
.../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++---
.../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++----
.../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++--
.../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++--
.../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++----
14 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index fde07e4b119d..406a922a714e 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -113,7 +113,7 @@ examples:
hd44780 {
compatible = "hit,hd44780";
display-height-chars = <2>;
- display-width-chars = <16>;
+ display-width-chars = <16>;
data-gpios = <&pcf8574 4 0>,
<&pcf8574 5 0>,
<&pcf8574 6 0>,
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
index 624984d51c10..7f8d98226437 100644
--- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -125,7 +125,7 @@ examples:
clk25m: clock-oscillator-25m {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <25000000>;
+ clock-frequency = <25000000>;
clock-output-names = "clk25m";
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 5fcc8dd012f1..be2616ff9af6 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -80,9 +80,9 @@ examples:
compatible = "adi,ad7780";
reg = <0>;
- avdd-supply = <&vdd_supply>;
- powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&vdd_supply>;
+ powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 73def67fbe01..b6a233cd5f6b 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -58,7 +58,7 @@ examples:
reg = <0x3600>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <1>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
index b3a626389870..64abe9a4cd9e 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -46,6 +46,6 @@ examples:
pmic_rradc: adc@4500 {
compatible = "qcom,pmi8998-rradc";
reg = <0x4500>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <1>;
};
};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
index 2b153d7c5421..e44e4e5708a7 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
@@ -55,8 +55,8 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq-st.h>
irq-syscfg {
- compatible = "st,stih407-irq-syscfg";
- st,syscfg = <&syscfg_cpu>;
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_cpu>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 2459a55ed540..940b12688167 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -203,7 +203,7 @@ examples:
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- cd-gpios = <&gpio2 31 0x4>;
+ cd-gpios = <&gpio2 31 0x4>;
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-cmd;
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
index 973e478a399d..bf6cbc7c2ba3 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -120,7 +120,7 @@ examples:
pinctrl-names = "default";
pinctrl-0 = <&cps_sfpp0_pins>;
tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
};
mdio {
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 53da2edd7c9a..120e3bb1e545 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -83,7 +83,7 @@ examples:
<0x0 0x28050000 0x0 0x00010000>,
<0x0 0x24200000 0x0 0x00002000>,
<0x0 0x24162000 0x0 0x00001000>;
- reg-names = "dbi", "config", "ulreg", "smu", "mpu";
+ reg-names = "dbi", "config", "ulreg", "smu", "mpu";
device_type = "pci";
bus-range = <0x00 0xff>;
num-lanes = <2>;
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index b5ca40d0e251..d476de82e5c3 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -185,17 +185,17 @@ examples:
sd1_mux {
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
<RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
- power-source = <3300>;
+ power-source = <3300>;
};
sd1_data {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
- power-source = <3300>;
+ power-source = <3300>;
};
sd1_ctrl {
pins = "SD1_CLK", "SD1_CMD";
- power-source = <3300>;
+ power-source = <3300>;
};
};
};
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
index 07e38be39f1b..89f9603499b4 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -79,10 +79,10 @@ examples:
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- richtek,output-charge-current = <500000>;
- richtek,end-of-charge-percentage = <10>;
- richtek,battery-regulation-voltage = <4200000>;
- richtek,boost-output-voltage = <5050000>;
+ richtek,output-charge-current = <500000>;
+ richtek,end-of-charge-percentage = <10>;
+ richtek,battery-regulation-voltage = <4200000>;
+ richtek,boost-output-voltage = <5050000>;
richtek,min-input-voltage-regulation = <4500000>;
richtek,avg-input-current-regulation = <500000>;
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 0221397eb51e..f825ee9efd81 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -62,8 +62,8 @@ examples:
regulator-name = "buck1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
};
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index 6de5b027f990..0d34af98403f 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -98,8 +98,8 @@ examples:
regulator-name = "buck1";
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <3587500>;
- regulator-min-microamp = <460000>;
- regulator-max-microamp = <7600000>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <7600000>;
regulator-boot-on;
mps,buck-ovp-disable;
mps,buck-phase-delay = /bits/ 8 <2>;
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index 30632efdad8b..df36e29d974c 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -113,10 +113,10 @@ examples:
};
imx7d-cm4 {
- compatible = "fsl,imx7d-cm4";
- memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
- syscon = <&src>;
- clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
+ compatible = "fsl,imx7d-cm4";
+ memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+ syscon = <&src>;
+ clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
};
- |
--
2.34.1
next reply other threads:[~2023-11-24 9:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-24 9:21 Krzysztof Kozlowski [this message]
2023-11-24 9:21 ` [PATCH] dt-bindings: correct white-spaces in examples Krzysztof Kozlowski
2023-11-24 10:03 ` Serge Semin
2023-11-24 10:03 ` Serge Semin
2023-11-25 14:08 ` Jonathan Cameron
2023-11-25 14:08 ` Jonathan Cameron
2023-11-27 14:21 ` Geert Uytterhoeven
2023-11-27 14:21 ` Geert Uytterhoeven
2023-11-27 17:32 ` Stephen Boyd
2023-11-27 17:32 ` Stephen Boyd
2023-11-27 17:35 ` Mathieu Poirier
2023-11-27 17:35 ` Mathieu Poirier
2023-11-28 11:12 ` Ulf Hansson
2023-11-28 11:12 ` Ulf Hansson
2023-11-29 20:31 ` Rob Herring
2023-11-29 20:31 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231124092121.16866-1-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.