From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Eric Dumazet" <edumazet@google.com>,
"Paolo Abeni" <pabeni@redhat.com>,
"Shuah Khan" <shuah@kernel.org>,
"David Ahern" <dsahern@kernel.org>,
linux-kselftest@vger.kernel.org,
"Po-Hsu Lin" <po-hsu.lin@canonical.com>,
"Guillaume Nault" <gnault@redhat.com>,
"Björn Töpel" <bjorn@rivosinc.com>,
"Ryan Roberts" <ryan.roberts@arm.com>,
"Andrew Morton" <akpm@linux-foundation.org>,
"Mark Brown" <broonie@kernel.org>,
"Luis Chamberlain" <mcgrof@kernel.org>,
"Hangbin Liu" <liuhangbin@gmail.com>
Subject: [PATCH net-next 26/38] selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace
Date: Fri, 24 Nov 2023 17:27:24 +0800 [thread overview]
Message-ID: <20231124092736.3673263-27-liuhangbin@gmail.com> (raw)
In-Reply-To: <20231124092736.3673263-1-liuhangbin@gmail.com>
Here is the test result after conversion.
]# ./test_bridge_neigh_suppress.sh
declare -- sip="192.0.2.1"
declare -- tip="192.0.2.2"
declare -- vid="10"
Per-port ARP suppression - VLAN 10
----------------------------------
TEST: arping [ OK ]
TEST: ARP suppression [ OK ]
...
TEST: NS suppression (VLAN 20) [ OK ]
Tests passed: 148
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
.../net/test_bridge_neigh_suppress.sh | 333 +++++++++---------
1 file changed, 163 insertions(+), 170 deletions(-)
diff --git a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh
index d80f2cd87614..cd8629b476e2 100755
--- a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh
+++ b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh
@@ -45,9 +45,8 @@
# | sw1 | | sw2 |
# +------------------------------------+ +------------------------------------+
+source lib.sh
ret=0
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
# All tests in this script. Can be overridden with -t option.
TESTS="
@@ -140,9 +139,6 @@ setup_topo_ns()
{
local ns=$1; shift
- ip netns add $ns
- ip -n $ns link set dev lo up
-
ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0
@@ -153,21 +149,22 @@ setup_topo()
{
local ns
- for ns in h1 h2 sw1 sw2; do
+ setup_ns h1 h2 sw1 sw2
+ for ns in $h1 $h2 $sw1 $sw2; do
setup_topo_ns $ns
done
ip link add name veth0 type veth peer name veth1
- ip link set dev veth0 netns h1 name eth0
- ip link set dev veth1 netns sw1 name swp1
+ ip link set dev veth0 netns $h1 name eth0
+ ip link set dev veth1 netns $sw1 name swp1
ip link add name veth0 type veth peer name veth1
- ip link set dev veth0 netns sw1 name veth0
- ip link set dev veth1 netns sw2 name veth0
+ ip link set dev veth0 netns $sw1 name veth0
+ ip link set dev veth1 netns $sw2 name veth0
ip link add name veth0 type veth peer name veth1
- ip link set dev veth0 netns h2 name eth0
- ip link set dev veth1 netns sw2 name swp1
+ ip link set dev veth0 netns $h2 name eth0
+ ip link set dev veth1 netns $sw2 name swp1
}
setup_host_common()
@@ -291,11 +288,7 @@ setup()
cleanup()
{
- local ns
-
- for ns in h1 h2 sw1 sw2; do
- ip netns del $ns &> /dev/null
- done
+ cleanup_ns $h1 $h2 $sw1 $sw2
}
################################################################################
@@ -312,80 +305,80 @@ neigh_suppress_arp_common()
echo "Per-port ARP suppression - VLAN $vid"
echo "----------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
# Initial state - check that ARP requests are not suppressed and that
# ARP replies are received.
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression"
# Enable neighbor suppression and check that nothing changes compared
# to the initial state.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "ARP suppression"
# Install an FDB entry for the remote host and check that nothing
# changes compared to the initial state.
- h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
- run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
+ h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
+ run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
log_test $? 0 "FDB entry installation"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
- tc_check_packets sw1 "dev vx0 egress" 101 3
+ tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "ARP suppression"
# Install a neighbor on the matching SVI interface and check that ARP
# requests are suppressed.
- run_cmd "ip -n sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid"
+ run_cmd "ip -n $sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid"
log_test $? 0 "Neighbor entry installation"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
- tc_check_packets sw1 "dev vx0 egress" 101 3
+ tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "ARP suppression"
# Take the second host down and check that ARP requests are suppressed
# and that ARP replies are received.
- run_cmd "ip -n h2 link set dev eth0.$vid down"
+ run_cmd "ip -n $h2 link set dev eth0.$vid down"
log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
- tc_check_packets sw1 "dev vx0 egress" 101 3
+ tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "ARP suppression"
- run_cmd "ip -n h2 link set dev eth0.$vid up"
+ run_cmd "ip -n $h2 link set dev eth0.$vid up"
log_test $? 0 "H2 up"
# Disable neighbor suppression and check that ARP requests are no
# longer suppressed.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 0 "arping"
- tc_check_packets sw1 "dev vx0 egress" 101 4
+ tc_check_packets $sw1 "dev vx0 egress" 101 4
log_test $? 0 "ARP suppression"
# Take the second host down and check that ARP requests are not
# suppressed and that ARP replies are not received.
- run_cmd "ip -n h2 link set dev eth0.$vid down"
+ run_cmd "ip -n $h2 link set dev eth0.$vid down"
log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip"
log_test $? 1 "arping"
- tc_check_packets sw1 "dev vx0 egress" 101 5
+ tc_check_packets $sw1 "dev vx0 egress" 101 5
log_test $? 0 "ARP suppression"
}
@@ -409,86 +402,86 @@ neigh_suppress_ns_common()
local saddr=$1; shift
local daddr=$1; shift
local maddr=$1; shift
- local h2_mac
+ local $h2_mac
echo
echo "Per-port NS suppression - VLAN $vid"
echo "---------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
# Initial state - check that NS messages are not suppressed and that ND
# messages are received.
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression"
# Enable neighbor suppression and check that nothing changes compared
# to the initial state.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "NS suppression"
# Install an FDB entry for the remote host and check that nothing
# changes compared to the initial state.
- h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
- run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
+ h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]')
+ run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid"
log_test $? 0 "FDB entry installation"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
- tc_check_packets sw1 "dev vx0 egress" 101 3
+ tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "NS suppression"
# Install a neighbor on the matching SVI interface and check that NS
# messages are suppressed.
- run_cmd "ip -n sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid"
+ run_cmd "ip -n $sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid"
log_test $? 0 "Neighbor entry installation"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
- tc_check_packets sw1 "dev vx0 egress" 101 3
+ tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "NS suppression"
# Take the second host down and check that NS messages are suppressed
# and that ND messages are received.
- run_cmd "ip -n h2 link set dev eth0.$vid down"
+ run_cmd "ip -n $h2 link set dev eth0.$vid down"
log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
- tc_check_packets sw1 "dev vx0 egress" 101 3
+ tc_check_packets $sw1 "dev vx0 egress" 101 3
log_test $? 0 "NS suppression"
- run_cmd "ip -n h2 link set dev eth0.$vid up"
+ run_cmd "ip -n $h2 link set dev eth0.$vid up"
log_test $? 0 "H2 up"
# Disable neighbor suppression and check that NS messages are no longer
# suppressed.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 0 "ndisc6"
- tc_check_packets sw1 "dev vx0 egress" 101 4
+ tc_check_packets $sw1 "dev vx0 egress" 101 4
log_test $? 0 "NS suppression"
# Take the second host down and check that NS messages are not
# suppressed and that ND messages are not received.
- run_cmd "ip -n h2 link set dev eth0.$vid down"
+ run_cmd "ip -n $h2 link set dev eth0.$vid down"
log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid"
log_test $? 2 "ndisc6"
- tc_check_packets sw1 "dev vx0 egress" 101 5
+ tc_check_packets $sw1 "dev vx0 egress" 101 5
log_test $? 0 "NS suppression"
}
@@ -517,125 +510,125 @@ neigh_vlan_suppress_arp()
local sip2=192.0.2.17
local tip1=192.0.2.2
local tip2=192.0.2.18
- local h2_mac1
- local h2_mac2
+ local $h2_mac1
+ local $h2_mac2
echo
echo "Per-{Port, VLAN} ARP suppression"
echo "--------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
- h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
- h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
- run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
- run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
- run_cmd "ip -n sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
- run_cmd "ip -n sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
+ h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
+ h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
+ run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
+ run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
+ run_cmd "ip -n $sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
+ run_cmd "ip -n $sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
# Enable per-{Port, VLAN} neighbor suppression and check that ARP
# requests are not suppressed and that ARP replies are received.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
log_test $? 0 "\"neigh_vlan_suppress\" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 1
+ tc_check_packets $sw1 "dev vx0 egress" 102 1
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Enable neighbor suppression on VLAN 10 and check that only on this
# VLAN ARP requests are suppressed.
- run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
- run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
+ run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
+ run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)"
- run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
+ run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 2
+ tc_check_packets $sw1 "dev vx0 egress" 102 2
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Enable neighbor suppression on the port and check that it has no
# effect compared to previous state.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 3
+ tc_check_packets $sw1 "dev vx0 egress" 102 3
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable neighbor suppression on the port and check that it has no
# effect compared to previous state.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "ARP suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 4
+ tc_check_packets $sw1 "dev vx0 egress" 102 4
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable neighbor suppression on VLAN 10 and check that ARP requests
# are no longer suppressed on this VLAN.
- run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
- run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
+ run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
+ run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "ARP suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 5
+ tc_check_packets $sw1 "dev vx0 egress" 102 5
log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable per-{Port, VLAN} neighbor suppression, enable neighbor
# suppression on the port and check that on both VLANs ARP requests are
# suppressed.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
log_test $? 0 "\"neigh_vlan_suppress\" is off"
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1"
log_test $? 0 "arping (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
+ run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2"
log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "ARP suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 5
+ tc_check_packets $sw1 "dev vx0 egress" 102 5
log_test $? 0 "ARP suppression (VLAN $vid2)"
}
@@ -648,125 +641,125 @@ neigh_vlan_suppress_ns()
local daddr1=2001:db8:1::2
local daddr2=2001:db8:2::2
local maddr=ff02::1:ff00:2
- local h2_mac1
- local h2_mac2
+ local $h2_mac1
+ local $h2_mac2
echo
echo "Per-{Port, VLAN} NS suppression"
echo "-------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass"
- run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
+ run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass"
+ run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
- h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
- h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
- run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
- run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
- run_cmd "ip -n sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
- run_cmd "ip -n sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
+ h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]')
+ h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]')
+ run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1"
+ run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2"
+ run_cmd "ip -n $sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1"
+ run_cmd "ip -n $sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
# Enable per-{Port, VLAN} neighbor suppression and check that NS
# messages are not suppressed and that ND messages are received.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress on\""
log_test $? 0 "\"neigh_vlan_suppress\" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 1
+ tc_check_packets $sw1 "dev vx0 egress" 102 1
log_test $? 0 "NS suppression (VLAN $vid2)"
# Enable neighbor suppression on VLAN 10 and check that only on this
# VLAN NS messages are suppressed.
- run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
- run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
+ run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on"
+ run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on (VLAN $vid1)"
- run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
+ run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid2)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 2
+ tc_check_packets $sw1 "dev vx0 egress" 102 2
log_test $? 0 "NS suppression (VLAN $vid2)"
# Enable neighbor suppression on the port and check that it has no
# effect compared to previous state.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 3
+ tc_check_packets $sw1 "dev vx0 egress" 102 3
log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable neighbor suppression on the port and check that it has no
# effect compared to previous state.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1
+ tc_check_packets $sw1 "dev vx0 egress" 101 1
log_test $? 0 "NS suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 4
+ tc_check_packets $sw1 "dev vx0 egress" 102 4
log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable neighbor suppression on VLAN 10 and check that NS messages
# are no longer suppressed on this VLAN.
- run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
- run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
+ run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off"
+ run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep \"neigh_suppress off\""
log_test $? 0 "\"neigh_suppress\" is off (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "NS suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 5
+ tc_check_packets $sw1 "dev vx0 egress" 102 5
log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable per-{Port, VLAN} neighbor suppression, enable neighbor
# suppression on the port and check that on both VLANs NS messages are
# suppressed.
- run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_vlan_suppress off\""
log_test $? 0 "\"neigh_vlan_suppress\" is off"
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on"
- run_cmd "bridge -n sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
+ run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on"
+ run_cmd "bridge -n $sw1 -d link show dev vx0 | grep \"neigh_suppress on\""
log_test $? 0 "\"neigh_suppress\" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1"
log_test $? 0 "ndisc6 (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
+ run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2"
log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2
+ tc_check_packets $sw1 "dev vx0 egress" 101 2
log_test $? 0 "NS suppression (VLAN $vid1)"
- tc_check_packets sw1 "dev vx0 egress" 102 5
+ tc_check_packets $sw1 "dev vx0 egress" 102 5
log_test $? 0 "NS suppression (VLAN $vid2)"
}
--
2.41.0
next prev parent reply other threads:[~2023-11-24 9:29 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-24 9:26 [PATCH net-next 00/38] Conver all net selftests to run in unique namespace Hangbin Liu
2023-11-24 9:26 ` [PATCH net-next 01/38] selftests/net: add lib.sh Hangbin Liu
2023-11-24 14:05 ` Petr Machata
2023-11-25 5:41 ` Hangbin Liu
2023-11-27 13:15 ` Petr Machata
2023-11-24 14:35 ` Petr Machata
2023-11-24 15:25 ` Petr Machata
2023-11-25 6:15 ` Hangbin Liu
2023-11-27 13:19 ` Petr Machata
2023-11-24 9:27 ` [PATCH net-next 02/38] selftests/net: arp_ndisc_evict_nocarrier.sh convert to run test in unique namespace Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 03/38] selftest: arp_ndisc_untracked_subnets.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 04/38] selftests/net: convert cmsg tests to make them run " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 05/38] selftests/net: convert drop_monitor_tests.sh to run it " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 06/38] selftests/net: convert fcnal-test.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 07/38] selftests/net: convert fib_nexthop_multiprefix " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 08/38] selftests/net: convert fib_nexthop_nongw.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 09/38] selftests/net: convert fib_nexthops.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 10/38] selftests/net: convert fib-onlink-tests.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 11/38] selftests/net: convert fib_rule_tests.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 12/38] selftests/net: convert fib_tests.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 13/38] selftests/net: convert gre_gso.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 14/38] selftests/net: convert icmp_redirect.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 15/38] sleftests/net: convert icmp.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 16/38] selftests/net: convert ioam6.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 17/38] selftests/net: convert l2tp.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 18/38] selftests/net: convert ndisc_unsolicited_na_test.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 19/38] selftests/net: convert netns-name.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 20/38] selftests/net: convert fdb_flush.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 21/38] selftests/net: convert rtnetlink.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 22/38] selftests/net: convert sctp_vrf.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 23/38] selftests/net: use unique netns name for setup_loopback.sh setup_veth.sh Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 24/38] selftests/net: convert stress_reuseport_listen.sh to run it in unique namespace Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 25/38] selftests/net: convert test_bridge_backup_port.sh " Hangbin Liu
2023-11-24 9:27 ` Hangbin Liu [this message]
2023-11-24 9:27 ` [PATCH net-next 27/38] selftests/net: convert test_vxlan_mdb.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 28/38] selftests/net: convert test_vxlan_nolocalbypass.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 29/38] selftests/net: convert test_vxlan_under_vrf.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 30/38] selftests/net: convert test_vxlan_vnifiltering.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 31/38] selftests/net: convert toeplitz.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 32/38] selftests/net: convert unicast_extensions.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 33/38] selftests/net: convert vrf_route_leaking.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 34/38] selftests/net: convert vrf_strict_mode_test.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 35/38] selftests/net: convert vrf-xfrm-tests.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 36/38] selftests/net: convert traceroute.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 37/38] selftests/net: convert xfrm_policy.sh " Hangbin Liu
2023-11-24 9:27 ` [PATCH net-next 38/38] kselftest/runner.sh: add netns support Hangbin Liu
2023-11-27 2:42 ` [PATCH net-next 00/38] Conver all net selftests to run in unique namespace David Ahern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231124092736.3673263-27-liuhangbin@gmail.com \
--to=liuhangbin@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=bjorn@rivosinc.com \
--cc=broonie@kernel.org \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@google.com \
--cc=gnault@redhat.com \
--cc=kuba@kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=mcgrof@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=po-hsu.lin@canonical.com \
--cc=ryan.roberts@arm.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.