From: Roland Hieber <rhi@pengutronix.de>
To: Bartosz Golaszewski <brgl@bgdev.pl>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>, Li Yang <leoyang.li@nxp.com>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Roland Hieber <rhi@pengutronix.de>,
Marco Felsch <m.felsch@pengutronix.de>,
Philipp Zabel <p.zabel@pengutronix.de>,
Michael Tretter <m.tretter@pengutronix.de>
Subject: [PATCH 5/5] ARM: dts: add support for Gossen Metrawatt Profitest
Date: Mon, 27 Nov 2023 22:11:06 +0100 [thread overview]
Message-ID: <20231127-b4-imx7-var-som-gome-v1-5-f26f88f2d0bc@pengutronix.de> (raw)
In-Reply-To: <20231127-b4-imx7-var-som-gome-v1-0-f26f88f2d0bc@pengutronix.de>
From: Marco Felsch <m.felsch@pengutronix.de>
This is the initial support for the Gossen Metrawatt Profitest MF
(e143_01) board based on a Variscite VAR-SOM-MX7 SoM.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Co-developed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Co-developed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Co-developed-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 7 +
arch/arm/boot/dts/nxp/imx/Makefile | 1 +
arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts | 559 +++++++++++++++++++++++
3 files changed, 567 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 32b195852a75..b751d289c712 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -900,6 +900,13 @@ properties:
- const: toradex,colibri-imx7d-emmc
- const: fsl,imx7d
+ - description: Variscite VAR-SOM-MX7 based boards
+ items:
+ - enum:
+ - gome,e143_01 # Gossen Metrawatt Profitest MF (e143_01)
+ - const: variscite,var-som-mx7
+ - const: fsl,imx7d
+
- description: i.MX7ULP based Boards
items:
- enum:
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index a724d1a7a9a0..f0a68c715a61 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -363,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-colibri-iris-v2.dtb \
imx7d-flex-concentrator.dtb \
imx7d-flex-concentrator-mfg.dtb \
+ imx7d-gome-e143_01.dtb \
imx7d-mba7.dtb \
imx7d-meerkat96.dtb \
imx7d-nitrogen7.dtb \
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts
new file mode 100644
index 000000000000..6e98d34b2e54
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-gome-e143_01.dts
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Gossen Metrawatt GmbH
+ * Copyright (C) 2022 Marco Felsch, Pengutronix
+ * Copyright (C) 2022 Philipp Zabel, Pengutronix
+ * Copyright (C) 2022 Roland Hieber, Pengutronix
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "imx7d-var-som-mx7.dtsi"
+
+/ {
+ model = "Gossen Metrawatt Profitest MF (e143_01)";
+ compatible = "gome,e143_01", "variscite,var-som-mx7", "fsl,imx7d";
+
+ aliases {
+ gpio7 = &gpio8;
+ rtc0 = &rtc0;
+ };
+
+ max98357a: audio-codec {
+ compatible = "maxim,max98357a";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmode>;
+ sdmode-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; // Pin 60 AUDIO_SHDN_B
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>, <&pinctrl_gpio_keys_2>;
+ autorepeat;
+
+ button-0 {
+ label = "S0";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; // Pin 183 BTN_S0_ESC
+ linux,code = <KEY_ESC>;
+ wakeup-source;
+ };
+
+ button-1 {
+ label = "S1";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; // Pin 185 BTN_S1_MEM
+ linux,code = <KEY_DOCUMENTS>;
+ wakeup-source;
+ };
+
+ button-2 {
+ label = "S2";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; // Pin 181 BTN_S2_HLP
+ linux,code = <KEY_HELP>;
+ wakeup-source;
+ };
+
+ button-3 {
+ label = "S3";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; // Pin 1 BTN_S3_STA
+ linux,code = <KEY_PROG1>;
+ wakeup-source;
+ };
+
+ button-4 {
+ label = "S4";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; // Pin 168 BTN_S4_IDN
+ linux,code = <KEY_PROG2>;
+ wakeup-source;
+ };
+
+ button-5 {
+ label = "S5";
+ gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; // Pin 28 BTN_S5
+ linux,code = <KEY_F5>;
+ };
+
+ button-6 {
+ label = "S6";
+ gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; // Pin 40 BTN_S6
+ linux,code = <KEY_F6>;
+ };
+
+ button-7 {
+ label = "S7";
+ gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; // Pin 38 BTN_S7
+ linux,code = <KEY_F7>;
+ };
+
+ button-8 {
+ label = "S8";
+ gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; // Pin 36 BTN_S8
+ linux,code = <KEY_F8>;
+ };
+
+ button-9 {
+ label = "S9";
+ gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; // Pin 20 BTN_S9
+ linux,code = <KEY_F9>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_poweroff>;
+ gpios = <&gpio7 14 GPIO_ACTIVE_LOW>; // Pin 7 POWER_OFF_B
+ input;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc2 0>, // ARS_VAL
+ <&adc2 1>, // VBAT_VAL
+ <&adc2 2>, // LCD_BACKLIGHT_VAL
+ <&adc2 3>; // VCC_5V0_FB
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_debug_led>;
+
+ test-led-1 {
+ label = "test-led-1:red";
+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; // Pin 44 LED_TEST1_B
+ color = <LED_COLOR_ID_RED>;
+ linux,default-trigger = "disk-activity";
+ };
+
+ test-led-2 {
+ label = "test-led-2:red";
+ gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; // Pin 46 LED_TEST2_B
+ color = <LED_COLOR_ID_RED>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ leds2 {
+ compatible = "gpio-leds";
+
+ led_netz_gn {
+ label = "mains:green";
+ gpios = <&gpio8 9 GPIO_ACTIVE_LOW>; // LED_NETZ_GN
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_netz_rt {
+ label = "mains:red";
+ gpios = <&gpio8 8 GPIO_ACTIVE_LOW>; // LED_NETZ_RT
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ };
+
+ led_debug_gn {
+ label = "debug:green";
+ gpios = <&gpio8 0 GPIO_ACTIVE_LOW>; // LED_DEBUG_GN
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_debug_rt {
+ label = "debug:red";
+ gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; // LED_DEBUG_RT
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led_ul_gn {
+ label = "ulrl:green";
+ gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; // LED_UL_GN
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_ul_rt {
+ label = "ulrl:red";
+ gpios = <&gpio8 6 GPIO_ACTIVE_LOW>; // LED_UL_RT
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ };
+
+ led_rcd_gn {
+ label = "rcd:green";
+ gpios = <&gpio8 3 GPIO_ACTIVE_LOW>; // LED_RCD_GN
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_rcd_rt {
+ label = "rcd:red";
+ gpios = <&gpio8 7 GPIO_ACTIVE_LOW>; // LED_RCD_RT
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ };
+ };
+
+ reg_vled_backlight: regulator-vled-backlight {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi_backlight>;
+ regulator-name = "VLED_BACKLIGHT";
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <20000000>;
+ regulator-max-microvolt = <20000000>;
+ enable-active-high;
+ };
+
+ reg_vcc_3v3_per: regulator-vcc-3v3-per {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vcc_3v3_per>;
+ regulator-name = "VCC_3V3_PER";
+ gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; // Pin 83 VCC_3V3_PER_EN
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <30000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_vcc_5v0_per: regulator-vcc-5v0-per {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vcc_5v0_per>;
+ regulator-name = "VCC_5V0_PER";
+ gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; // Pin 75 VCC_5V0_PER_EN
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_imt: regulator-imt {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_imt>;
+ regulator-name = "VCC_IMT";
+ gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>; // Pin 66 MT_EN
+ regulator-min-microvolt = <9000000>;
+ regulator-max-microvolt = <9000000>;
+ enable-active-high;
+ };
+
+ reg_vcc_1v8_alg: regulator-vcc-1v8-alg {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8_ALG";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_vcc_3v3_per>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "max98357aaudio";
+ /delete-property/ simple-audio-card,widgets;
+ /delete-property/ simple-audio-card,routing;
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&max98357a>;
+ };
+ };
+
+ uc-imt-power {
+ compatible = "reg-userspace-consumer";
+ regulator-name = "reg_imt-consumer";
+ regulator-supplies = "vcc";
+ vcc-supply = <®_imt>;
+ };
+};
+
+&adc2 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c2 {
+ /delete-node/ wm8731@1a;
+
+ /* DS1339 RTC module */
+ rtc0: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ trickle-resistor-ohms = <250>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 GPIO_ACTIVE_LOW>; // Pin 120 RTC_INT_B
+ wakeup-source;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio4 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; // Pin 175 I2C4_SCL
+ sda-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; // Pin 173 I2C4_SDA
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio8: max7312@23 {
+ compatible = "maxim,max7312";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "LED_DEBUG_GN", "LED_DEBUG_RT", "LED_UL_GN", "LED_RCD_GN",
+ "", "", "LED_UL_RT", "LED_RCD_RT",
+ "LED_NETZ_RT", "LED_NETZ_GN", "", "",
+ "DP_HW_CODE_1", "DP_HW_CODE_2", "DP_HW_CODE_3", "DP_HW_CODE_4";
+ vcc-supply = <®_vcc_3v3_per>;
+ };
+};
+
+&gpio1 {
+ gpio-line-names = "GWDOG_RST_B", "BTN_S3_STA", "BTN_S4_IDN", "",
+ "", "", "", "USB_HOST_PWR_EN",
+ "", "", "BTN_S2_HLP", "BTN_S1_MEM",
+ "BTN_S0_ESC", "RTC_INT_B", "SOM: bt reg on";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "",
+ "DBG_GPIO1", "DBG_GPIO2", "DBG_GPIO3", "DBG_GPIO4",
+ "", "", "", "",
+ "MT_RXD", "MT_TXD", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "VCC_3V3_PER_EN", "",
+ "DSI_RESET", "VCC_5V0_PER_EN";
+};
+
+&gpio3 {
+ gpio-line-names = "", "", "LED_TEST1_B", "LED_TEST2_B",
+ "BTN_S8", "BTN_S6", "MT_RESET", "",
+ "", "", "MT_EN", "",
+ "", "", "", "",
+ "", "", "", "",
+ "AUDIO_SHDN_B", "", "BTN_S7", "",
+ "BTN_S5", "", "", "BTN_S9",
+ "BATT_LOW";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "I2C1_SCL", "I2C1_SDA", "I2C2_SCL", "I2C2_SDA",
+ "", "", "I2C4_SCL", "I2C4_SDA",
+ "", "", "", "",
+ "", "", "", "HIL_SPI_CS0";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "SOM: ethphy0 reset";
+};
+
+&gpio6 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "SOM: sd3_pwr (eMMC)";
+};
+
+&gpio7 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "LCD_BACKLIGHT_EN", "", "POWER_OFF_B";
+};
+
+&lcdif {
+ assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>,
+ <&clks IMX7D_PLL_VIDEO_POST_DIV>;
+ assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>;
+ assigned-clock-rates = <0>, <128000000>;
+ status = "okay";
+};
+
+&mipi_dsi {
+ samsung,burst-clock-frequency = <850000000>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "tianma,tm050jdhg33", "ilitek,ili9881c";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi_panel>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; // Pin 73 DSI_RESET
+ power-supply = <®_vcc_3v3_per>;
+ dsi-lanes = <2>;
+
+ rotation = <90>;
+
+ ilitek,enable-internal-backlight;
+ default-brightness = <2047>;
+ ilitek,pwm-frequency = <50000>;
+ ilitek,backlight-supply = <®_vled_backlight>;
+ };
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+ <&clks IMX7D_SAI3_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+ assigned-clock-rates = <0>, <36864000>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbotg2 {
+ status = "okay";
+};
+
+&iomuxc_lpsr {
+ pinctrl_gpio_keys_2: pinctrl_gpio_keys_2grp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0C
+ MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x0C
+ >;
+ };
+
+ pinctrl_usbotg2_pwr: pinctrl_usbotg2_pwrgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14
+ >;
+ };
+};
+
+&iomuxc {
+ pinctrl_gpio_keys: pinctrl-gpio-keysgrp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x0000000C
+ MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0000000C
+ MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0000000C
+ MX7D_PAD_LCD_DATA00__GPIO3_IO5 0x0000000C
+ MX7D_PAD_LCD_DATA17__GPIO3_IO22 0x0000000C
+ MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x0000000C
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x0000000C
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x0000000C
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpiogrp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x4000007f
+ MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x4000007f
+ >;
+ };
+
+ pinctrl_mipi_backlight: mipi-backlightgrp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x0000001B
+ >;
+ };
+
+ pinctrl_mipi_panel: mipi-panelgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x0000001B /* DSI_RESET */
+ >;
+ };
+
+ pinctrl_poweroff: pinctrl_poweroffgrp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x0000001B
+ >;
+ };
+
+ pinctrl_reg_vcc_3v3_per: pinctrl_reg_vcc_3v3_pergrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x0000001B
+ >;
+ };
+
+ pinctrl_reg_vcc_5v0_per: pinctrl_reg_vcc_5v0_pergrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x0000001B
+ >;
+ };
+
+ pinctrl_reg_imt: pinctrl_reg_imtgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA05__GPIO3_IO10 0x0000001B
+ >;
+ };
+
+ pinctrl_rtc: pinctrl_rtcgrp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0000001B
+ >;
+ };
+
+ pinctrl_sai3: pinctrl_sai3grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK 0x0000001F
+ MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC 0x0000001F
+ MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0 0x00000030
+ >;
+ };
+
+ pinctrl_sdmode: pinctrl_sdmodegrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA15__GPIO3_IO20 0x0000001F
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 /* DEBUG_UART1_TXD */
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 /* DEBUG_UART1_RXD */
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x79
+ MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x79
+ >;
+ };
+
+ pinctrl_debug_led: pinctrl_debug_ledgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_HSYNC__GPIO3_IO2 0x00000003
+ MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x00000003
+ >;
+ };
+};
--
2.39.2
next prev parent reply other threads:[~2023-11-27 21:11 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-27 21:11 [PATCH 0/5] ARM: dts: add support for Gossen Metrawatt Profitest Roland Hieber
2023-11-27 21:11 ` [PATCH 1/5] dt-bindings: at24: add ROHM BR24G04 Roland Hieber
2023-11-28 7:51 ` Krzysztof Kozlowski
2023-11-28 7:51 ` Krzysztof Kozlowski
2023-12-01 9:38 ` Bartosz Golaszewski
2023-12-01 9:38 ` Bartosz Golaszewski
2023-11-27 21:11 ` [PATCH 2/5] dt-bindings: vendor-prefixes: add Gossen Metrawatt Roland Hieber
2023-11-28 7:52 ` Krzysztof Kozlowski
2023-11-28 7:52 ` Krzysztof Kozlowski
2023-11-27 21:11 ` [PATCH 3/5] ARM: dts: imx7d-pinfunc: add mux for OSC32K_32K_OUT via GPIO1_IO03 Roland Hieber
2023-11-27 21:11 ` [PATCH 4/5] ARM: dts: add Variscite VAR-SOM-MX7 System on Module Roland Hieber
2023-11-28 7:53 ` Krzysztof Kozlowski
2023-11-28 7:53 ` Krzysztof Kozlowski
2023-11-28 17:22 ` Rob Herring
2023-11-28 17:22 ` Rob Herring
2023-11-27 21:11 ` Roland Hieber [this message]
2023-11-28 6:09 ` [PATCH 5/5] ARM: dts: add support for Gossen Metrawatt Profitest kernel test robot
2023-11-28 6:09 ` kernel test robot
2023-11-28 7:56 ` Krzysztof Kozlowski
2023-11-28 7:56 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231127-b4-imx7-var-som-gome-v1-5-f26f88f2d0bc@pengutronix.de \
--to=rhi@pengutronix.de \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=m.tretter@pengutronix.de \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.