All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>, Shuah Khan <shuah@kernel.org>,
	David Ahern <dsahern@kernel.org>,
	linux-kselftest@vger.kernel.org,
	Po-Hsu Lin <po-hsu.lin@canonical.com>,
	Guillaume Nault <gnault@redhat.com>,
	Petr Machata <petrm@nvidia.com>,
	James Prestwood <prestwoj@gmail.com>,
	Jaehee Park <jhpark1013@gmail.com>,
	Ido Schimmel <idosch@nvidia.com>,
	Justin Iurman <justin.iurman@uliege.be>,
	Xin Long <lucien.xin@gmail.com>,
	James Chapman <jchapman@katalix.com>,
	Hangbin Liu <liuhangbin@gmail.com>
Subject: [PATCHv3 net-next 08/14] selftests/net: convert icmp_redirect.sh to run it in unique namespace
Date: Sat,  2 Dec 2023 10:01:04 +0800	[thread overview]
Message-ID: <20231202020110.362433-9-liuhangbin@gmail.com> (raw)
In-Reply-To: <20231202020110.362433-1-liuhangbin@gmail.com>

Here is the test result after conversion.

 # ./icmp_redirect.sh

 ###########################################################################
 Legacy routing
 ###########################################################################

 TEST: IPv4: redirect exception                                      [ OK ]

 ...

 TEST: IPv4: mtu exception plus redirect                             [ OK ]
 TEST: IPv6: mtu exception plus redirect                             [ OK ]

 Tests passed:  40
 Tests failed:   0
 Tests xfailed:   0

Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
 tools/testing/selftests/net/icmp_redirect.sh | 182 +++++++++----------
 1 file changed, 88 insertions(+), 94 deletions(-)

diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
index 7b9d6e31b8e7..d6f0e449c029 100755
--- a/tools/testing/selftests/net/icmp_redirect.sh
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -19,6 +19,7 @@
 # Route on r1 changed to go to r2 via eth0. This causes a redirect to be sent
 # from r1 to h1 telling h1 to use r2 when talking to h2.
 
+source lib.sh
 VERBOSE=0
 PAUSE_ON_FAIL=no
 
@@ -140,11 +141,7 @@ get_linklocal()
 
 cleanup()
 {
-	local ns
-
-	for ns in h1 h2 r1 r2; do
-		ip netns del $ns 2>/dev/null
-	done
+	cleanup_ns $h1 $h2 $r1 $r2
 }
 
 create_vrf()
@@ -171,102 +168,99 @@ setup()
 
 	#
 	# create nodes as namespaces
-	#
-	for ns in h1 h2 r1 r2; do
-		ip netns add $ns
-		ip -netns $ns li set lo up
-
-		case "${ns}" in
-		h[12]) ip netns exec $ns sysctl -q -w net.ipv4.conf.all.accept_redirects=1
-		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
-		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.accept_redirects=1
-		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
-			;;
-		r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
-		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1
-		       ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0
-		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
-
-		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
-		       ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
-		esac
+	setup_ns h1 h2 r1 r2
+	for ns in $h1 $h2 $r1 $r2; do
+		if echo $ns | grep -q h[12]-; then
+			ip netns exec $ns sysctl -q -w net.ipv4.conf.all.accept_redirects=1
+			ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
+			ip netns exec $ns sysctl -q -w net.ipv6.conf.all.accept_redirects=1
+			ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
+		else
+			ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
+			ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1
+			ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0
+			ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
+
+			ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
+			ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
+		fi
 	done
 
 	#
 	# create interconnects
 	#
-	ip -netns h1 li add eth0 type veth peer name r1h1
-	ip -netns h1 li set r1h1 netns r1 name eth0 up
+	ip -netns $h1 li add eth0 type veth peer name r1h1
+	ip -netns $h1 li set r1h1 netns $r1 name eth0 up
 
-	ip -netns h1 li add eth1 type veth peer name r2h1
-	ip -netns h1 li set r2h1 netns r2 name eth0 up
+	ip -netns $h1 li add eth1 type veth peer name r2h1
+	ip -netns $h1 li set r2h1 netns $r2 name eth0 up
 
-	ip -netns h2 li add eth0 type veth peer name r2h2
-	ip -netns h2 li set eth0 up
-	ip -netns h2 li set r2h2 netns r2 name eth2 up
+	ip -netns $h2 li add eth0 type veth peer name r2h2
+	ip -netns $h2 li set eth0 up
+	ip -netns $h2 li set r2h2 netns $r2 name eth2 up
 
-	ip -netns r1 li add eth1 type veth peer name r2r1
-	ip -netns r1 li set eth1 up
-	ip -netns r1 li set r2r1 netns r2 name eth1 up
+	ip -netns $r1 li add eth1 type veth peer name r2r1
+	ip -netns $r1 li set eth1 up
+	ip -netns $r1 li set r2r1 netns $r2 name eth1 up
 
 	#
 	# h1
 	#
 	if [ "${WITH_VRF}" = "yes" ]; then
-		create_vrf "h1"
+		create_vrf "$h1"
 		H1_VRF_ARG="vrf ${VRF}"
 		H1_PING_ARG="-I ${VRF}"
 	else
 		H1_VRF_ARG=
 		H1_PING_ARG=
 	fi
-	ip -netns h1 li add br0 type bridge
+	ip -netns $h1 li add br0 type bridge
 	if [ "${WITH_VRF}" = "yes" ]; then
-		ip -netns h1 li set br0 vrf ${VRF} up
+		ip -netns $h1 li set br0 vrf ${VRF} up
 	else
-		ip -netns h1 li set br0 up
+		ip -netns $h1 li set br0 up
 	fi
-	ip -netns h1 addr add dev br0 ${H1_N1_IP}/24
-	ip -netns h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
-	ip -netns h1 li set eth0 master br0 up
-	ip -netns h1 li set eth1 master br0 up
+	ip -netns $h1 addr add dev br0 ${H1_N1_IP}/24
+	ip -netns $h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
+	ip -netns $h1 li set eth0 master br0 up
+	ip -netns $h1 li set eth1 master br0 up
 
 	#
 	# h2
 	#
-	ip -netns h2 addr add dev eth0 ${H2_N2_IP}/24
-	ip -netns h2 ro add default via ${R2_N2_IP} dev eth0
-	ip -netns h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad
-	ip -netns h2 -6 ro add default via ${R2_N2_IP6} dev eth0
+	ip -netns $h2 addr add dev eth0 ${H2_N2_IP}/24
+	ip -netns $h2 ro add default via ${R2_N2_IP} dev eth0
+	ip -netns $h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad
+	ip -netns $h2 -6 ro add default via ${R2_N2_IP6} dev eth0
 
 	#
 	# r1
 	#
-	ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24
-	ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
-	ip -netns r1 addr add dev eth1 ${R1_R2_N1_IP}/30
-	ip -netns r1 -6 addr add dev eth1 ${R1_R2_N1_IP6}/126 nodad
+	ip -netns $r1 addr add dev eth0 ${R1_N1_IP}/24
+	ip -netns $r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
+	ip -netns $r1 addr add dev eth1 ${R1_R2_N1_IP}/30
+	ip -netns $r1 -6 addr add dev eth1 ${R1_R2_N1_IP6}/126 nodad
 
 	#
 	# r2
 	#
-	ip -netns r2 addr add dev eth0 ${R2_N1_IP}/24
-	ip -netns r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
-	ip -netns r2 addr add dev eth1 ${R2_R1_N1_IP}/30
-	ip -netns r2 -6 addr add dev eth1 ${R2_R1_N1_IP6}/126 nodad
-	ip -netns r2 addr add dev eth2 ${R2_N2_IP}/24
-	ip -netns r2 -6 addr add dev eth2 ${R2_N2_IP6}/64 nodad
+	ip -netns $r2 addr add dev eth0 ${R2_N1_IP}/24
+	ip -netns $r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
+	ip -netns $r2 addr add dev eth1 ${R2_R1_N1_IP}/30
+	ip -netns $r2 -6 addr add dev eth1 ${R2_R1_N1_IP6}/126 nodad
+	ip -netns $r2 addr add dev eth2 ${R2_N2_IP}/24
+	ip -netns $r2 -6 addr add dev eth2 ${R2_N2_IP6}/64 nodad
 
 	sleep 2
 
-	R1_LLADDR=$(get_linklocal r1 eth0)
+	R1_LLADDR=$(get_linklocal $r1 eth0)
 	if [ $? -ne 0 ]; then
 		echo "Error: Failed to get link-local address of r1's eth0"
 		exit 1
 	fi
 	log_debug "initial gateway is R1's lladdr = ${R1_LLADDR}"
 
-	R2_LLADDR=$(get_linklocal r2 eth0)
+	R2_LLADDR=$(get_linklocal $r2 eth0)
 	if [ $? -ne 0 ]; then
 		echo "Error: Failed to get link-local address of r2's eth0"
 		exit 1
@@ -278,8 +272,8 @@ change_h2_mtu()
 {
 	local mtu=$1
 
-	run_cmd ip -netns h2 li set eth0 mtu ${mtu}
-	run_cmd ip -netns r2 li set eth2 mtu ${mtu}
+	run_cmd ip -netns $h2 li set eth0 mtu ${mtu}
+	run_cmd ip -netns $r2 li set eth2 mtu ${mtu}
 }
 
 check_exception()
@@ -291,40 +285,40 @@ check_exception()
 	# From 172.16.1.101: icmp_seq=1 Redirect Host(New nexthop: 172.16.1.102)
 	if [ "$VERBOSE" = "1" ]; then
 		echo "Commands to check for exception:"
-		run_cmd ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP}
-		run_cmd ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6}
+		run_cmd ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP}
+		run_cmd ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6}
 	fi
 
 	if [ -n "${mtu}" ]; then
 		mtu=" mtu ${mtu}"
 	fi
 	if [ "$with_redirect" = "yes" ]; then
-		ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
+		ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
 		grep -q "cache <redirected> expires [0-9]*sec${mtu}"
 	elif [ -n "${mtu}" ]; then
-		ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
+		ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
 		grep -q "cache expires [0-9]*sec${mtu}"
 	else
 		# want to verify that neither mtu nor redirected appears in
 		# the route get output. The -v will wipe out the cache line
 		# if either are set so the last grep -q will not find a match
-		ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
+		ip -netns $h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
 		grep -E -v 'mtu|redirected' | grep -q "cache"
 	fi
 	log_test $? 0 "IPv4: ${desc}" 0
 
 	# No PMTU info for test "redirect" and "mtu exception plus redirect"
 	if [ "$with_redirect" = "yes" ] && [ "$desc" != "redirect exception plus mtu" ]; then
-		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
+		ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
 		grep -v "mtu" | grep -q "${H2_N2_IP6} .*via ${R2_LLADDR} dev br0"
 	elif [ -n "${mtu}" ]; then
-		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
+		ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
 		grep -q "${mtu}"
 	else
 		# IPv6 is a bit harder. First strip out the match if it
 		# contains an mtu exception and then look for the first
 		# gateway - R1's lladdr
-		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
+		ip -netns $h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
 		grep -v "mtu" | grep -q "${R1_LLADDR}"
 	fi
 	log_test $? 0 "IPv6: ${desc}" 1
@@ -334,21 +328,21 @@ run_ping()
 {
 	local sz=$1
 
-	run_cmd ip netns exec h1 ping -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP}
-	run_cmd ip netns exec h1 ${ping6} -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP6}
+	run_cmd ip netns exec $h1 ping -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP}
+	run_cmd ip netns exec $h1 ${ping6} -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP6}
 }
 
 replace_route_new()
 {
 	# r1 to h2 via r2 and eth0
-	run_cmd ip -netns r1 nexthop replace id 1 via ${R2_N1_IP} dev eth0
-	run_cmd ip -netns r1 nexthop replace id 2 via ${R2_LLADDR} dev eth0
+	run_cmd ip -netns $r1 nexthop replace id 1 via ${R2_N1_IP} dev eth0
+	run_cmd ip -netns $r1 nexthop replace id 2 via ${R2_LLADDR} dev eth0
 }
 
 reset_route_new()
 {
-	run_cmd ip -netns r1 nexthop flush
-	run_cmd ip -netns h1 nexthop flush
+	run_cmd ip -netns $r1 nexthop flush
+	run_cmd ip -netns $h1 nexthop flush
 
 	initial_route_new
 }
@@ -356,34 +350,34 @@ reset_route_new()
 initial_route_new()
 {
 	# r1 to h2 via r2 and eth1
-	run_cmd ip -netns r1 nexthop add id 1 via ${R2_R1_N1_IP} dev eth1
-	run_cmd ip -netns r1 ro add ${H2_N2} nhid 1
+	run_cmd ip -netns $r1 nexthop add id 1 via ${R2_R1_N1_IP} dev eth1
+	run_cmd ip -netns $r1 ro add ${H2_N2} nhid 1
 
-	run_cmd ip -netns r1 nexthop add id 2 via ${R2_R1_N1_IP6} dev eth1
-	run_cmd ip -netns r1 -6 ro add ${H2_N2_6} nhid 2
+	run_cmd ip -netns $r1 nexthop add id 2 via ${R2_R1_N1_IP6} dev eth1
+	run_cmd ip -netns $r1 -6 ro add ${H2_N2_6} nhid 2
 
 	# h1 to h2 via r1
-	run_cmd ip -netns h1 nexthop add id 1 via ${R1_N1_IP} dev br0
-	run_cmd ip -netns h1 ro add ${H1_VRF_ARG} ${H2_N2} nhid 1
+	run_cmd ip -netns $h1 nexthop add id 1 via ${R1_N1_IP} dev br0
+	run_cmd ip -netns $h1 ro add ${H1_VRF_ARG} ${H2_N2} nhid 1
 
-	run_cmd ip -netns h1 nexthop add id 2 via ${R1_LLADDR} dev br0
-	run_cmd ip -netns h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} nhid 2
+	run_cmd ip -netns $h1 nexthop add id 2 via ${R1_LLADDR} dev br0
+	run_cmd ip -netns $h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} nhid 2
 }
 
 replace_route_legacy()
 {
 	# r1 to h2 via r2 and eth0
-	run_cmd ip -netns r1    ro replace ${H2_N2}   via ${R2_N1_IP}  dev eth0
-	run_cmd ip -netns r1 -6 ro replace ${H2_N2_6} via ${R2_LLADDR} dev eth0
+	run_cmd ip -netns $r1    ro replace ${H2_N2}   via ${R2_N1_IP}  dev eth0
+	run_cmd ip -netns $r1 -6 ro replace ${H2_N2_6} via ${R2_LLADDR} dev eth0
 }
 
 reset_route_legacy()
 {
-	run_cmd ip -netns r1    ro del ${H2_N2}
-	run_cmd ip -netns r1 -6 ro del ${H2_N2_6}
+	run_cmd ip -netns $r1    ro del ${H2_N2}
+	run_cmd ip -netns $r1 -6 ro del ${H2_N2_6}
 
-	run_cmd ip -netns h1    ro del ${H1_VRF_ARG} ${H2_N2}
-	run_cmd ip -netns h1 -6 ro del ${H1_VRF_ARG} ${H2_N2_6}
+	run_cmd ip -netns $h1    ro del ${H1_VRF_ARG} ${H2_N2}
+	run_cmd ip -netns $h1 -6 ro del ${H1_VRF_ARG} ${H2_N2_6}
 
 	initial_route_legacy
 }
@@ -391,22 +385,22 @@ reset_route_legacy()
 initial_route_legacy()
 {
 	# r1 to h2 via r2 and eth1
-	run_cmd ip -netns r1    ro add ${H2_N2}   via ${R2_R1_N1_IP}  dev eth1
-	run_cmd ip -netns r1 -6 ro add ${H2_N2_6} via ${R2_R1_N1_IP6} dev eth1
+	run_cmd ip -netns $r1    ro add ${H2_N2}   via ${R2_R1_N1_IP}  dev eth1
+	run_cmd ip -netns $r1 -6 ro add ${H2_N2_6} via ${R2_R1_N1_IP6} dev eth1
 
 	# h1 to h2 via r1
 	# - IPv6 redirect only works if gateway is the LLA
-	run_cmd ip -netns h1    ro add ${H1_VRF_ARG} ${H2_N2} via ${R1_N1_IP} dev br0
-	run_cmd ip -netns h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} via ${R1_LLADDR} dev br0
+	run_cmd ip -netns $h1    ro add ${H1_VRF_ARG} ${H2_N2} via ${R1_N1_IP} dev br0
+	run_cmd ip -netns $h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} via ${R1_LLADDR} dev br0
 }
 
 check_connectivity()
 {
 	local rc
 
-	run_cmd ip netns exec h1 ping -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP}
+	run_cmd ip netns exec $h1 ping -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP}
 	rc=$?
-	run_cmd ip netns exec h1 ${ping6} -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP6}
+	run_cmd ip netns exec $h1 ${ping6} -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP6}
 	[ $? -ne 0 ] && rc=$?
 
 	return $rc
-- 
2.43.0


  parent reply	other threads:[~2023-12-02  2:01 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-02  2:00 [PATCHv3 net-next 00/14] Conver net selftests to run in unique namespace (Part 1) Hangbin Liu
2023-12-02  2:00 ` [PATCHv3 net-next 01/14] selftests/net: add lib.sh Hangbin Liu
2023-12-05 12:00   ` Paolo Abeni
2023-12-06  2:48     ` Hangbin Liu
2023-12-06 12:32     ` Petr Machata
2023-12-06 15:13       ` Paolo Abeni
2023-12-07 10:34         ` Petr Machata
2023-12-07 15:26           ` David Ahern
2023-12-02  2:00 ` [PATCHv3 net-next 02/14] selftests/net: convert arp_ndisc_evict_nocarrier.sh to run it in unique namespace Hangbin Liu
2023-12-02  2:00 ` [PATCHv3 net-next 03/14] selftests/net: specify the interface when do arping Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 04/14] selftests/net: convert arp_ndisc_untracked_subnets.sh to run it in unique namespace Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 05/14] selftests/net: convert cmsg tests to make them run " Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 06/14] selftests/net: convert drop_monitor_tests.sh to run it " Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 07/14] selftests/net: convert traceroute.sh " Hangbin Liu
2023-12-02  2:01 ` Hangbin Liu [this message]
2023-12-02  2:01 ` [PATCHv3 net-next 09/14] sleftests/net: convert icmp.sh " Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 10/14] selftests/net: convert ioam6.sh " Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 11/14] selftests/net: convert l2tp.sh " Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 12/14] selftests/net: convert ndisc_unsolicited_na_test.sh " Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 13/14] selftests/net: convert sctp_vrf.sh " Hangbin Liu
2023-12-02  2:01 ` [PATCHv3 net-next 14/14] selftests/net: convert unicast_extensions.sh " Hangbin Liu
2023-12-05 12:30 ` [PATCHv3 net-next 00/14] Conver net selftests to run in unique namespace (Part 1) patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231202020110.362433-9-liuhangbin@gmail.com \
    --to=liuhangbin@gmail.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=edumazet@google.com \
    --cc=gnault@redhat.com \
    --cc=idosch@nvidia.com \
    --cc=jchapman@katalix.com \
    --cc=jhpark1013@gmail.com \
    --cc=justin.iurman@uliege.be \
    --cc=kuba@kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=lucien.xin@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=petrm@nvidia.com \
    --cc=po-hsu.lin@canonical.com \
    --cc=prestwoj@gmail.com \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.