All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Bee <knaerzche@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Alex Bee <knaerzche@gmail.com>
Subject: [PATCH 1/3] ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
Date: Sat,  2 Dec 2023 14:05:05 +0100	[thread overview]
Message-ID: <20231202130506.66738-3-knaerzche@gmail.com> (raw)
In-Reply-To: <20231202130506.66738-2-knaerzche@gmail.com>

SoC TRM, SoC datasheet and board schematics always refer to the
same gpio numbers - even if not all are used for a specific board.
In order to not have to re-define them for every board move the
aliases to SoC dtsi for RK3128 like it's being done for most other
Rockchip ARM SoCs.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
 arch/arm/boot/dts/rockchip/rk3128-evb.dts      | 4 ----
 arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 4 ----
 arch/arm/boot/dts/rockchip/rk3128.dtsi         | 7 +++++++
 3 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
index c38f42497cbd..776a483cc26b 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
@@ -12,10 +12,6 @@ / {
 	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
 		i2c1 = &i2c1;
 		mmc0 = &emmc;
 	};
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 61b9f069c8a2..b448e2b96e08 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -11,10 +11,6 @@ / {
 	compatible = "geniatech,xpi-3128", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
 		mmc0 = &emmc;
 		mmc1 = &sdmmc;
 		serial0 = &uart1;
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 4e8b38604ecd..5b751284d6ca 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -15,6 +15,13 @@ / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.43.0


WARNING: multiple messages have this Message-ID (diff)
From: Alex Bee <knaerzche@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Alex Bee <knaerzche@gmail.com>
Subject: [PATCH 1/3] ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
Date: Sat,  2 Dec 2023 14:05:05 +0100	[thread overview]
Message-ID: <20231202130506.66738-3-knaerzche@gmail.com> (raw)
In-Reply-To: <20231202130506.66738-2-knaerzche@gmail.com>

SoC TRM, SoC datasheet and board schematics always refer to the
same gpio numbers - even if not all are used for a specific board.
In order to not have to re-define them for every board move the
aliases to SoC dtsi for RK3128 like it's being done for most other
Rockchip ARM SoCs.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
 arch/arm/boot/dts/rockchip/rk3128-evb.dts      | 4 ----
 arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 4 ----
 arch/arm/boot/dts/rockchip/rk3128.dtsi         | 7 +++++++
 3 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
index c38f42497cbd..776a483cc26b 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
@@ -12,10 +12,6 @@ / {
 	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
 		i2c1 = &i2c1;
 		mmc0 = &emmc;
 	};
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 61b9f069c8a2..b448e2b96e08 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -11,10 +11,6 @@ / {
 	compatible = "geniatech,xpi-3128", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
 		mmc0 = &emmc;
 		mmc1 = &sdmmc;
 		serial0 = &uart1;
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 4e8b38604ecd..5b751284d6ca 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -15,6 +15,13 @@ / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Alex Bee <knaerzche@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Alex Bee <knaerzche@gmail.com>
Subject: [PATCH 1/3] ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
Date: Sat,  2 Dec 2023 14:05:05 +0100	[thread overview]
Message-ID: <20231202130506.66738-3-knaerzche@gmail.com> (raw)
In-Reply-To: <20231202130506.66738-2-knaerzche@gmail.com>

SoC TRM, SoC datasheet and board schematics always refer to the
same gpio numbers - even if not all are used for a specific board.
In order to not have to re-define them for every board move the
aliases to SoC dtsi for RK3128 like it's being done for most other
Rockchip ARM SoCs.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
 arch/arm/boot/dts/rockchip/rk3128-evb.dts      | 4 ----
 arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 4 ----
 arch/arm/boot/dts/rockchip/rk3128.dtsi         | 7 +++++++
 3 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
index c38f42497cbd..776a483cc26b 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
@@ -12,10 +12,6 @@ / {
 	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
 		i2c1 = &i2c1;
 		mmc0 = &emmc;
 	};
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 61b9f069c8a2..b448e2b96e08 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -11,10 +11,6 @@ / {
 	compatible = "geniatech,xpi-3128", "rockchip,rk3128";
 
 	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
 		mmc0 = &emmc;
 		mmc1 = &sdmmc;
 		serial0 = &uart1;
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 4e8b38604ecd..5b751284d6ca 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -15,6 +15,13 @@ / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-12-02 13:06 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-02 13:05 [PATCH 0/3] Move core bus and gpio aliases to SoC dtsi for RK3128 Alex Bee
2023-12-02 13:05 ` Alex Bee
2023-12-02 13:05 ` Alex Bee
2023-12-02 13:05 ` Alex Bee [this message]
2023-12-02 13:05   ` [PATCH 1/3] ARM: dts: rockchip: Move " Alex Bee
2023-12-02 13:05   ` Alex Bee
2023-12-02 13:05 ` [PATCH 2/3] ARM: dts: rockchip: Move i2c " Alex Bee
2023-12-02 13:05   ` Alex Bee
2023-12-02 13:05   ` Alex Bee
2023-12-02 13:05 ` [PATCH] ARM: dts: rockchip: Move uart " Alex Bee
2023-12-02 13:05   ` Alex Bee
2023-12-02 13:05   ` Alex Bee
2023-12-05  0:05 ` [PATCH 0/3] Move core bus and gpio " Heiko Stuebner
2023-12-05  0:05   ` Heiko Stuebner
2023-12-05  0:05   ` Heiko Stuebner
2023-12-05 13:33   ` Alex Bee
2023-12-05 13:33     ` Alex Bee
2023-12-05 13:33     ` Alex Bee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231202130506.66738-3-knaerzche@gmail.com \
    --to=knaerzche@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.