From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>, Shuah Khan <shuah@kernel.org>,
David Ahern <dsahern@kernel.org>,
linux-kselftest@vger.kernel.org,
Po-Hsu Lin <po-hsu.lin@canonical.com>,
Guillaume Nault <gnault@redhat.com>,
Petr Machata <petrm@nvidia.com>, Ido Schimmel <idosch@nvidia.com>,
Nikolay Aleksandrov <razor@blackwall.org>,
Vladimir Nikishkin <vladimir@nikishkin.pw>,
Roopa Prabhu <roopa@nvidia.com>,
Hangbin Liu <liuhangbin@gmail.com>
Subject: [PATCH net-next 9/9] selftests/net: convert vrf-xfrm-tests.sh to run it in unique namespace
Date: Wed, 6 Dec 2023 15:08:01 +0800 [thread overview]
Message-ID: <20231206070801.1691247-10-liuhangbin@gmail.com> (raw)
In-Reply-To: <20231206070801.1691247-1-liuhangbin@gmail.com>
Here is the test result after conversion.
]# ./vrf-xfrm-tests.sh
No qdisc on VRF device
TEST: IPv4 no xfrm policy [ OK ]
TEST: IPv6 no xfrm policy [ OK ]
TEST: IPv4 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy with VRF in selector [ OK ]
TEST: IPv4 xfrm policy with xfrm device [ OK ]
TEST: IPv6 xfrm policy with xfrm device [ OK ]
netem qdisc on VRF device
TEST: IPv4 no xfrm policy [ OK ]
TEST: IPv6 no xfrm policy [ OK ]
TEST: IPv4 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy based on address [ OK ]
TEST: IPv6 xfrm policy with VRF in selector [ OK ]
TEST: IPv4 xfrm policy with xfrm device [ OK ]
TEST: IPv6 xfrm policy with xfrm device [ OK ]
Tests passed: 14
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
tools/testing/selftests/net/vrf-xfrm-tests.sh | 77 +++++++++----------
1 file changed, 36 insertions(+), 41 deletions(-)
diff --git a/tools/testing/selftests/net/vrf-xfrm-tests.sh b/tools/testing/selftests/net/vrf-xfrm-tests.sh
index 452638ae8aed..b64dd891699d 100755
--- a/tools/testing/selftests/net/vrf-xfrm-tests.sh
+++ b/tools/testing/selftests/net/vrf-xfrm-tests.sh
@@ -3,9 +3,7 @@
#
# Various combinations of VRF with xfrms and qdisc.
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
+source lib.sh
PAUSE_ON_FAIL=no
VERBOSE=0
ret=0
@@ -67,7 +65,7 @@ run_cmd_host1()
printf " COMMAND: $cmd\n"
fi
- out=$(eval ip netns exec host1 $cmd 2>&1)
+ out=$(eval ip netns exec $host1 $cmd 2>&1)
rc=$?
if [ "$VERBOSE" = "1" ]; then
if [ -n "$out" ]; then
@@ -116,9 +114,6 @@ create_ns()
[ -z "${addr}" ] && addr="-"
[ -z "${addr6}" ] && addr6="-"
- ip netns add ${ns}
-
- ip -netns ${ns} link set lo up
if [ "${addr}" != "-" ]; then
ip -netns ${ns} addr add dev lo ${addr}
fi
@@ -177,25 +172,25 @@ connect_ns()
cleanup()
{
- ip netns del host1
- ip netns del host2
+ cleanup_ns $host1 $host2
}
setup()
{
- create_ns "host1"
- create_ns "host2"
+ setup_ns host1 host2
+ create_ns "$host1"
+ create_ns "$host2"
- connect_ns "host1" eth0 ${HOST1_4}/24 ${HOST1_6}/64 \
- "host2" eth0 ${HOST2_4}/24 ${HOST2_6}/64
+ connect_ns "$host1" eth0 ${HOST1_4}/24 ${HOST1_6}/64 \
+ "$host2" eth0 ${HOST2_4}/24 ${HOST2_6}/64
- create_vrf "host1" ${VRF} ${TABLE}
- ip -netns host1 link set dev eth0 master ${VRF}
+ create_vrf "$host1" ${VRF} ${TABLE}
+ ip -netns $host1 link set dev eth0 master ${VRF}
}
cleanup_xfrm()
{
- for ns in host1 host2
+ for ns in $host1 $host2
do
for x in state policy
do
@@ -218,57 +213,57 @@ setup_xfrm()
#
# host1 - IPv4 out
- ip -netns host1 xfrm policy add \
+ ip -netns $host1 xfrm policy add \
src ${h1_4} dst ${h2_4} ${devarg} dir out \
tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel
# host2 - IPv4 in
- ip -netns host2 xfrm policy add \
+ ip -netns $host2 xfrm policy add \
src ${h1_4} dst ${h2_4} dir in \
tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel
# host1 - IPv4 in
- ip -netns host1 xfrm policy add \
+ ip -netns $host1 xfrm policy add \
src ${h2_4} dst ${h1_4} ${devarg} dir in \
tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel
# host2 - IPv4 out
- ip -netns host2 xfrm policy add \
+ ip -netns $host2 xfrm policy add \
src ${h2_4} dst ${h1_4} dir out \
tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel
# host1 - IPv6 out
- ip -6 -netns host1 xfrm policy add \
+ ip -6 -netns $host1 xfrm policy add \
src ${h1_6} dst ${h2_6} ${devarg} dir out \
tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel
# host2 - IPv6 in
- ip -6 -netns host2 xfrm policy add \
+ ip -6 -netns $host2 xfrm policy add \
src ${h1_6} dst ${h2_6} dir in \
tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel
# host1 - IPv6 in
- ip -6 -netns host1 xfrm policy add \
+ ip -6 -netns $host1 xfrm policy add \
src ${h2_6} dst ${h1_6} ${devarg} dir in \
tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel
# host2 - IPv6 out
- ip -6 -netns host2 xfrm policy add \
+ ip -6 -netns $host2 xfrm policy add \
src ${h2_6} dst ${h1_6} dir out \
tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel
#
# state
#
- ip -netns host1 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
+ ip -netns $host1 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
proto esp spi ${SPI_1} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
enc 'cbc(aes)' ${ENC_1} \
sel src ${h1_4} dst ${h2_4} ${devarg}
- ip -netns host2 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
+ ip -netns $host2 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
proto esp spi ${SPI_1} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
@@ -276,14 +271,14 @@ setup_xfrm()
sel src ${h1_4} dst ${h2_4}
- ip -netns host1 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
+ ip -netns $host1 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
proto esp spi ${SPI_2} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
enc 'cbc(aes)' ${ENC_2} \
sel src ${h2_4} dst ${h1_4} ${devarg}
- ip -netns host2 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
+ ip -netns $host2 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
proto esp spi ${SPI_2} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
@@ -291,14 +286,14 @@ setup_xfrm()
sel src ${h2_4} dst ${h1_4}
- ip -6 -netns host1 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
+ ip -6 -netns $host1 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
proto esp spi ${SPI_1} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
enc 'cbc(aes)' ${ENC_1} \
sel src ${h1_6} dst ${h2_6} ${devarg}
- ip -6 -netns host2 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
+ ip -6 -netns $host2 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
proto esp spi ${SPI_1} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
@@ -306,14 +301,14 @@ setup_xfrm()
sel src ${h1_6} dst ${h2_6}
- ip -6 -netns host1 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
+ ip -6 -netns $host1 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
proto esp spi ${SPI_2} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
enc 'cbc(aes)' ${ENC_2} \
sel src ${h2_6} dst ${h1_6} ${devarg}
- ip -6 -netns host2 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
+ ip -6 -netns $host2 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
proto esp spi ${SPI_2} reqid 0 mode tunnel \
replay-window 4 replay-oseq 0x4 \
auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
@@ -323,22 +318,22 @@ setup_xfrm()
cleanup_xfrm_dev()
{
- ip -netns host1 li del xfrm0
- ip -netns host2 addr del ${XFRM2_4}/24 dev eth0
- ip -netns host2 addr del ${XFRM2_6}/64 dev eth0
+ ip -netns $host1 li del xfrm0
+ ip -netns $host2 addr del ${XFRM2_4}/24 dev eth0
+ ip -netns $host2 addr del ${XFRM2_6}/64 dev eth0
}
setup_xfrm_dev()
{
local vrfarg="vrf ${VRF}"
- ip -netns host1 li add type xfrm dev eth0 if_id ${IF_ID}
- ip -netns host1 li set xfrm0 ${vrfarg} up
- ip -netns host1 addr add ${XFRM1_4}/24 dev xfrm0
- ip -netns host1 addr add ${XFRM1_6}/64 dev xfrm0
+ ip -netns $host1 li add type xfrm dev eth0 if_id ${IF_ID}
+ ip -netns $host1 li set xfrm0 ${vrfarg} up
+ ip -netns $host1 addr add ${XFRM1_4}/24 dev xfrm0
+ ip -netns $host1 addr add ${XFRM1_6}/64 dev xfrm0
- ip -netns host2 addr add ${XFRM2_4}/24 dev eth0
- ip -netns host2 addr add ${XFRM2_6}/64 dev eth0
+ ip -netns $host2 addr add ${XFRM2_4}/24 dev eth0
+ ip -netns $host2 addr add ${XFRM2_6}/64 dev eth0
setup_xfrm ${XFRM1_4} ${XFRM2_4} ${XFRM1_6} ${XFRM2_6} "if_id ${IF_ID}"
}
--
2.43.0
next prev parent reply other threads:[~2023-12-06 7:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-06 7:07 [PATCH net-next 0/9] Convert net selftests to run in unique namespace (Part 2) Hangbin Liu
2023-12-06 7:07 ` [PATCH net-next 1/9] selftests/net: convert test_bridge_backup_port.sh to run it in unique namespace Hangbin Liu
2023-12-06 12:32 ` Ido Schimmel
2023-12-06 7:07 ` [PATCH net-next 2/9] selftests/net: convert test_bridge_neigh_suppress.sh " Hangbin Liu
2023-12-06 12:44 ` Ido Schimmel
2023-12-06 7:07 ` [PATCH net-next 3/9] selftests/net: convert test_vxlan_mdb.sh " Hangbin Liu
2023-12-06 12:58 ` Ido Schimmel
2023-12-06 7:07 ` [PATCH net-next 4/9] selftests/net: convert test_vxlan_nolocalbypass.sh " Hangbin Liu
2023-12-06 13:00 ` Ido Schimmel
2023-12-06 7:07 ` [PATCH net-next 5/9] selftests/net: convert test_vxlan_under_vrf.sh " Hangbin Liu
2023-12-06 13:27 ` Ido Schimmel
2023-12-06 7:07 ` [PATCH net-next 6/9] selftests/net: convert test_vxlan_vnifiltering.sh " Hangbin Liu
2023-12-06 13:32 ` Ido Schimmel
2023-12-06 7:07 ` [PATCH net-next 7/9] selftests/net: convert vrf_route_leaking.sh " Hangbin Liu
2023-12-06 7:08 ` [PATCH net-next 8/9] selftests/net: convert vrf_strict_mode_test.sh " Hangbin Liu
2023-12-06 7:08 ` Hangbin Liu [this message]
2023-12-08 12:20 ` [PATCH net-next 0/9] Convert net selftests to run in unique namespace (Part 2) patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231206070801.1691247-10-liuhangbin@gmail.com \
--to=liuhangbin@gmail.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@google.com \
--cc=gnault@redhat.com \
--cc=idosch@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=petrm@nvidia.com \
--cc=po-hsu.lin@canonical.com \
--cc=razor@blackwall.org \
--cc=roopa@nvidia.com \
--cc=shuah@kernel.org \
--cc=vladimir@nikishkin.pw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.