[PATCH v2 00/11] renesas: rzg3s: Add support for Ethernet

From: Claudiu <claudiu.beznea@tuxon.dev>
To: s.shtylyov@omp.ru, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
	geert+renesas@glider.be, magnus.damm@gmail.com,
	mturquette@baylibre.com, sboyd@kernel.org,
	linus.walleij@linaro.org,
	prabhakar.mahadev-lad.rj@bp.renesas.com,
	biju.das.jz@bp.renesas.com
Cc: linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: [PATCH v2 00/11] renesas: rzg3s: Add support for Ethernet
Date: Thu,  7 Dec 2023 09:06:49 +0200	[thread overview]
Message-ID: <20231207070700.4156557-1-claudiu.beznea.uj@bp.renesas.com> (raw)

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Hi,

Series adds Ethernet support for Renesas RZ/G3S.
Along with it preparatory cleanups and fixes were included.

Patches 1-2 are clock specific.
Patches 3-7 are pinctrl specific.
Patches 8-11 are device tree specific.

It is expected that patches will be integrated though Geert's tree.

Thank you,
Claudiu Beznea

Changes in v2:
- patches 1/14 and 14/14 from v1 were integrated thus, didn't include
  them in this version
- dropped patch 3/14 "clk: renesas: rzg2l-cpg: Add support for MSTOP"
  from v1 and associated changes; a follow up will be done on it after
  the current series will be accepted
- addressed review comments
- fixed typos in commit title and description
- collected tags
- removed IEN functinality form patch 6/12 and added it in a separate patch
  (patch 7/12)
- patch 11/14] "arm64: renesas: rzg3s-smarc-som: Invert the logic for
  SW_SD2_EN macro from" from v1 was replaced by patch 10/11 in this
  version "arm64: renesas: rzg3s-smarc-som: Use switches' names
  to select on-board functionalities"

Claudiu Beznea (11):
  clk: renesas: rzg2l-cpg: Check reset monitor registers
  clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and
    ETH1
  pinctrl: renesas: rzg2l: Move arg and index in the main function block
  pinctrl: renesas: rzg2l: Add pin configuration support for pinmux
    groups
  pinctrl: renesas: rzg2l: Add support to select power source for
    Ethernet pins
  pinctrl: renesas: rzg2l: Add output enable support
  pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
  dt-bindings: net: renesas,etheravb: Document RZ/G3S support
  arm64: renesas: r9a08g045: Add the Ethernet nodes
  arm64: renesas: rzg3s-smarc-som: Use switches' names to select
    on-board functionalities
  arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces

 .../bindings/net/renesas,etheravb.yaml        |   1 +
 arch/arm64/boot/dts/renesas/r9a08g045.dtsi    |  38 ++++
 .../boot/dts/renesas/rzg3s-smarc-som.dtsi     | 173 ++++++++++++++++--
 drivers/clk/renesas/r9a08g045-cpg.c           |  10 +
 drivers/clk/renesas/rzg2l-cpg.c               |  59 ++++--
 drivers/pinctrl/renesas/pinctrl-rzg2l.c       | 164 +++++++++++++++--
 6 files changed, 398 insertions(+), 47 deletions(-)

-- 
2.39.2