From: Vignesh Raghavendra <vigneshr@ti.com> To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 1/3] arm64: dts: ti: k3-am65: Add additional regs for DMA components Date: Tue, 12 Dec 2023 16:46:32 +0530 [thread overview] Message-ID: <20231212111634.3515175-2-vigneshr@ti.com> (raw) In-Reply-To: <20231212111634.3515175-1-vigneshr@ti.com> From: Manorit Chawdhry <m-chawdhry@ti.com> Add additional reg properties for UDMA and RingAcc nodes which are mostly used by bootloader components before Device Manager firmware services are available, in order to setup DMA transfers. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 8 ++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 5ebb87f467de..2033a8ec89d6 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -790,8 +790,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,am654-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x8000>, + <0x0 0x30d00000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index edd5cfbec40e..ecd7356f3315 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -214,8 +214,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,am654-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com> To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 1/3] arm64: dts: ti: k3-am65: Add additional regs for DMA components Date: Tue, 12 Dec 2023 16:46:32 +0530 [thread overview] Message-ID: <20231212111634.3515175-2-vigneshr@ti.com> (raw) In-Reply-To: <20231212111634.3515175-1-vigneshr@ti.com> From: Manorit Chawdhry <m-chawdhry@ti.com> Add additional reg properties for UDMA and RingAcc nodes which are mostly used by bootloader components before Device Manager firmware services are available, in order to setup DMA transfers. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 8 ++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 5ebb87f467de..2033a8ec89d6 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -790,8 +790,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,am654-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x8000>, + <0x0 0x30d00000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index edd5cfbec40e..ecd7356f3315 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -214,8 +214,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,am654-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; -- 2.43.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-12 11:16 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-12-12 11:16 [PATCH 0/3] arm64: dts: ti: k3: Add additioal regs for DMA components Vignesh Raghavendra 2023-12-12 11:16 ` Vignesh Raghavendra 2023-12-12 11:16 ` Vignesh Raghavendra [this message] 2023-12-12 11:16 ` [PATCH 1/3] arm64: dts: ti: k3-am65: Add additional " Vignesh Raghavendra 2023-12-13 9:46 ` Jai Luthra 2023-12-13 9:46 ` Jai Luthra 2023-12-12 11:16 ` [PATCH 2/3] arm64: dts: ti: k3-j7*: " Vignesh Raghavendra 2023-12-12 11:16 ` Vignesh Raghavendra 2023-12-13 9:55 ` Jai Luthra 2023-12-13 9:55 ` Jai Luthra 2023-12-12 11:16 ` [PATCH 3/3] arm64: dts: ti: k3-am6*: " Vignesh Raghavendra 2023-12-12 11:16 ` Vignesh Raghavendra 2023-12-13 9:39 ` Jai Luthra 2023-12-13 9:39 ` Jai Luthra
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231212111634.3515175-2-vigneshr@ti.com \ --to=vigneshr@ti.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.