From: Vignesh Raghavendra <vigneshr@ti.com> To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <j-luthra@ti.com> Subject: [PATCH v2 2/3] arm64: dts: ti: k3-j7*: Add additional regs for DMA components Date: Wed, 13 Dec 2023 19:21:37 +0530 [thread overview] Message-ID: <20231213135138.929517-3-vigneshr@ti.com> (raw) In-Reply-To: <20231213135138.929517-1-vigneshr@ti.com> From: Manorit Chawdhry <m-chawdhry@ti.com> Add additional reg properties for UDMA and RingAcc nodes which are mostly used by bootloader components before Device Manager firmware services are available, in order to setup DMA transfers. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 8 ++++++-- 8 files changed, 48 insertions(+), 16 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 264913f83287..b8424994ac5f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -281,8 +281,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,j721e-navss-main-udmap"; reg = <0x00 0x31150000 0x00 0x100>, <0x00 0x34000000 0x00 0x100000>, - <0x00 0x35000000 0x00 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x35000000 0x00 0x100000>, + <0x00 0x30b00000 0x00 0x4000>, + <0x00 0x30c00000 0x00 0x4000>, + <0x00 0x30d00000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 672cb2acc1be..60b26374ae0c 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -353,8 +353,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x00 0x285c0000 0x00 0x100>, <0x00 0x2a800000 0x00 0x40000>, - <0x00 0x2aa00000 0x00 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x2aa00000 0x00 0x40000>, + <0x00 0x284a0000 0x00 0x4000>, + <0x00 0x284c0000 0x00 0x4000>, + <0x00 0x28400000 0x00 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 746b9f8b1c64..2569b4c08ffb 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -382,8 +382,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,j721e-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x10000>, + <0x0 0x30d00000 0x0 0x8000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 8f259efe3af9..a74912d9e4da 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -475,8 +475,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index b03731b53a26..bf959312fad0 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -1086,8 +1086,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,j721e-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x80000>, - <0x0 0x35000000 0x0 0x200000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x200000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x8000>, + <0x0 0x30d00000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index d9e2cab8a8c5..80aa33c58a45 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -478,8 +478,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index d89bcddcfe3d..827328450f96 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -1188,8 +1188,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,j721e-navss-main-udmap"; reg = <0x00 0x31150000 0x00 0x100>, <0x00 0x34000000 0x00 0x80000>, - <0x00 0x35000000 0x00 0x200000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x35000000 0x00 0x200000>, + <0x00 0x30b00000 0x00 0x20000>, + <0x00 0x30c00000 0x00 0x8000>, + <0x00 0x30d00000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index 119f4e2cc0d1..3902a921d7e5 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -486,8 +486,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x00 0x285c0000 0x00 0x100>, <0x00 0x2a800000 0x00 0x40000>, - <0x00 0x2aa00000 0x00 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x2aa00000 0x00 0x40000>, + <0x00 0x284a0000 0x00 0x4000>, + <0x00 0x284c0000 0x00 0x4000>, + <0x00 0x28400000 0x00 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; -- 2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com> To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <j-luthra@ti.com> Subject: [PATCH v2 2/3] arm64: dts: ti: k3-j7*: Add additional regs for DMA components Date: Wed, 13 Dec 2023 19:21:37 +0530 [thread overview] Message-ID: <20231213135138.929517-3-vigneshr@ti.com> (raw) In-Reply-To: <20231213135138.929517-1-vigneshr@ti.com> From: Manorit Chawdhry <m-chawdhry@ti.com> Add additional reg properties for UDMA and RingAcc nodes which are mostly used by bootloader components before Device Manager firmware services are available, in order to setup DMA transfers. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 8 ++++++-- arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 8 ++++++-- 8 files changed, 48 insertions(+), 16 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 264913f83287..b8424994ac5f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -281,8 +281,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,j721e-navss-main-udmap"; reg = <0x00 0x31150000 0x00 0x100>, <0x00 0x34000000 0x00 0x100000>, - <0x00 0x35000000 0x00 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x35000000 0x00 0x100000>, + <0x00 0x30b00000 0x00 0x4000>, + <0x00 0x30c00000 0x00 0x4000>, + <0x00 0x30d00000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 672cb2acc1be..60b26374ae0c 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -353,8 +353,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x00 0x285c0000 0x00 0x100>, <0x00 0x2a800000 0x00 0x40000>, - <0x00 0x2aa00000 0x00 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x2aa00000 0x00 0x40000>, + <0x00 0x284a0000 0x00 0x4000>, + <0x00 0x284c0000 0x00 0x4000>, + <0x00 0x28400000 0x00 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 746b9f8b1c64..2569b4c08ffb 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -382,8 +382,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,j721e-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x10000>, + <0x0 0x30d00000 0x0 0x8000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 8f259efe3af9..a74912d9e4da 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -475,8 +475,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index b03731b53a26..bf959312fad0 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -1086,8 +1086,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,j721e-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x80000>, - <0x0 0x35000000 0x0 0x200000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x200000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x8000>, + <0x0 0x30d00000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index d9e2cab8a8c5..80aa33c58a45 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -478,8 +478,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index d89bcddcfe3d..827328450f96 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -1188,8 +1188,12 @@ main_udmap: dma-controller@31150000 { compatible = "ti,j721e-navss-main-udmap"; reg = <0x00 0x31150000 0x00 0x100>, <0x00 0x34000000 0x00 0x80000>, - <0x00 0x35000000 0x00 0x200000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x35000000 0x00 0x200000>, + <0x00 0x30b00000 0x00 0x20000>, + <0x00 0x30c00000 0x00 0x8000>, + <0x00 0x30d00000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index 119f4e2cc0d1..3902a921d7e5 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -486,8 +486,12 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x00 0x285c0000 0x00 0x100>, <0x00 0x2a800000 0x00 0x40000>, - <0x00 0x2aa00000 0x00 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x2aa00000 0x00 0x40000>, + <0x00 0x284a0000 0x00 0x4000>, + <0x00 0x284c0000 0x00 0x4000>, + <0x00 0x28400000 0x00 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; -- 2.43.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-13 14:04 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-12-13 13:51 [PATCH v2 0/3] arm64: dts: ti: k3: Add additioal regs for DMA components Vignesh Raghavendra 2023-12-13 13:51 ` Vignesh Raghavendra 2023-12-13 13:51 ` [PATCH v2 1/3] arm64: dts: ti: k3-am65: Add additional " Vignesh Raghavendra 2023-12-13 13:51 ` Vignesh Raghavendra 2023-12-13 13:51 ` Vignesh Raghavendra [this message] 2023-12-13 13:51 ` [PATCH v2 2/3] arm64: dts: ti: k3-j7*: " Vignesh Raghavendra 2023-12-13 13:51 ` [PATCH v2 3/3] arm64: dts: ti: k3-am6*: " Vignesh Raghavendra 2023-12-13 13:51 ` Vignesh Raghavendra 2023-12-13 15:24 ` [PATCH v2 0/3] arm64: dts: ti: k3: Add additioal " Jai Luthra 2023-12-13 15:24 ` Jai Luthra 2023-12-15 17:20 ` Nishanth Menon 2023-12-15 17:20 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231213135138.929517-3-vigneshr@ti.com \ --to=vigneshr@ti.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=j-luthra@ti.com \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.